• 제목/요약/키워드: Checking Application

검색결과 285건 처리시간 0.031초

ALE 미들웨어를 위한 이벤트 데이터 처리 방법 (A method of event data stream processing for ALE Middleware)

  • 노영식;변영철;이동철
    • 한국정보통신학회논문지
    • /
    • 제12권9호
    • /
    • pp.1554-1563
    • /
    • 2008
  • RFID에 관한 관심이 높아짐에 따라 RFID 리더에서 수집된 데이터를 효율적으로 처리하기 위한 RFID 미들웨어에 대한 연구가 활발히 진행되고 있다. 한편 RFID 미들웨어의 사실상의 표준을 이끌고 있는 EPCglobal에서는 미들웨어 규격으로 ALE 미들웨어 스펙을 제안하고 있으나 표준 인터페이스 및 기능만을 정의하고 있을 뿐 상세적인 스펙 구현에 대한 내용을 다루고 있지 않다. 본 논문에서는 EPCglobal의 ALE 미들웨어 스펙에서 정의하고 있는 사실상의 국제 표준인 인터페이스를 기반으로 응용 및 서비스 사용자가 직접 조건을 정의하여, 정밀한 필터링, 변경 유무 검사, 전송할 집합 산출, 데이터 유무 검사, 세밀한 데이터 그룹핑, 그리고 다양한 RFID 포맷 변환 등을 바탕으로 스트림 형태의 EPC 이벤트 데이터를 효율적으로 처리할 수 있는 ALE 미들웨어의 이벤트 데이터 처리 방법을 제안한다.

Study of the Optimization and the Depth Profile Using a Flat Type Ion Source in Glow Discharge Mass Spectrometry

  • Woo Jin Chun;Kim, Hyo Jin;Lim Heoung Bin;Moon Dae Won;Lee Kwang Woo
    • Bulletin of the Korean Chemical Society
    • /
    • 제13권6호
    • /
    • pp.620-624
    • /
    • 1992
  • The analytical performance of glow discharge mass spectrometer (GD-MS), using a flat type ion source is discussed. The efficiency of ion extraction was maximized at the distance between anode and cathode of 6 mm. At the operation condition of 4 mA, -1000 volt, and 1 mbar for the source, the optimum voltages for sampler and skimmer were40 volt and -280 volt, respectively. The intensities of Cu, Zn, and Mn were increased as a function of square root of current approximately. Korea standard reference materials (KSRM) were tested for an application study. The detection limits of most elements were obtained in the range of several ppm at the optimized operating condition. The peaks of aluminum and chromium were interfered by those of residual gases. The depth profile of nickel coated copper specimens (3, 5, 10 ${\mu}m$ thickness) were obtained by plotting time versus intensities of Ni and Cr after checking the thickness of nickel coated using a scanning electron microscope (SEM). At this moment, the sputtering rate of 0.2 ${\mu}m/min$ at the optimum operating condition was determined from the slope of the plot of time to the coating thickness. The roughness spectra of specimen's crater after 16 min, discharge were obtained using a Talysuf5m-120 roughness tester as well.

자율주행시 안전을 위한 AI와 연계 시스템 적용연구 (A Study on the Application of AI and Linkage System for Safety in the Autonomous Driving)

  • 서대성
    • 한국융합학회논문지
    • /
    • 제10권11호
    • /
    • pp.95-100
    • /
    • 2019
  • 본 논문은 자율 주행차량의 운행과 더불어 기존 차량 사고 방지를 위한 차량 간 통신 기술, 자율주행 기술, 브레이크 자동 제어 기술, 인공지능 기술 등이 널리 개발되고 있다. 차량 사고 발생이 일어나더라도 사망이나 부상을 최소화하기 위한 각종 기술들의 안전성의 상용화에 있다. 본 논문의 경우 자율주행 차량시, 안전성 확보연구이다. 이는 일반적인 저전력 근거리 무선 통신용 칩 신호나 초소형 도로 AI 장착 등의 공간적 요소에 따라 판별한다. 반면 본 논문은 상기 전자 칩의 신호를 읽는 데에서 생체 전자 칩까지의 "감지영역 내 체류 시간인식, 민감도"까지 체크하여 승차한 안전의 신뢰성을 높인다. 실제 세계 각국의 신뢰성을 실증한 결과로서, 안전성면에서 탑승객 전원의 안전 자율 시스템을 유도한다. 무인 자율차량 탑승과 상용화는 가까운 미래에 도로위 IoT의 AI 시스템과 생체 칩(Verification emotion + Chip)으로의 연계성면에서 그 진보성의 실증결과, 세계 각국의 안전 기술신뢰성은 더욱 부각된다.

탄층에 대한 정량적 물리검층에 기초한 암반 평가 과정 (A rock mass assessment procedure based on quantitative geophysical log analysis of coal measure sequences)

  • Hatherly Peter;Medhurst Terry;Sliwa Renate;Turner Roland
    • 지구물리와물리탐사
    • /
    • 제8권1호
    • /
    • pp.112-117
    • /
    • 2005
  • 물리검층은 석탄광 탐사에 일상적으로 적용된다. 현재 검층의 주요 적용 목적은 탄층의 심도 탐지와 탄질, 층서 및 암반강도의 정성적 추정이다. 그러나 만약 정량적 해석이 이루어진다면 더 많은 정보가 얻어질 수 있는데, 정량적 해석의 이해를 돕기 위해, 검층 반응을 Sydney Basin과 Bowen Basin의 호주산 검은 석탄(black coal) 광산지역에서 흔히 발견되는 쇄설퇴적암의 광물조성에 따라 논의하였으며, 검층 반응은 충분한 신뢰도로 광물조성에 대비될 수 있음을 알았다. 해석의 모호성은 만약 모든 종류의 검층자료가 있다면 더 잘 해결될 수 있을 것이다. 음파검층에서 측정된 속도와 계산값을 비교함으로써 일관성을 검토하는 방법 또한 서술하였다. 정량해석의 중요한 목적은 지질공학적 특성화이며, 이 논문에서는 물리검층으로부터 유추될 수 있는 물리적 성질을 고려한 쇄설암의 분류 시스템을 제안하였다.

근거중심 급성 뇌졸중 간호 가이드라인 수용개작 (Adaptation of the Evidence Based Nursing Practice Guideline)

  • 김지현;송소이;김미경;조명숙
    • 임상간호연구
    • /
    • 제17권2호
    • /
    • pp.176-191
    • /
    • 2011
  • Purpose: This methodological study translated, adapted, and validated the evidence based guideline of RNAO (Registered Nurses Association of Ontario) in Canada, for acute stroke care to domestic circumstances. Methods: Quality of the RNAO guideline was evaluated using AGREE tool. Then the guideline was translated into Korean and a preliminary guideline was established After checking content validation by an expert group, the Korean version of the guideline was applied to clinical settings to see its applicability. Results: The RNAO guideline in Korea was deemed appropriate. The Korean version of the guideline was drawn up with 56 items in 3 areas in stroke system related nursing, nursing of acute stroke inpatients, and stroke nursing assessment. A questionnaire survey was performed on appropriateness, enforceability, and applicability of those recommendations. A total of 54 recommendations were finalized after deleting 2 items below CVI 0.7 and correcting 3 items by taking professional advices. After trial application of the guideline to 40 stroke patients hospitalized at a ward of a hospital in Seoul, its performance was improved but was not statistically significant. Conclusion: This guideline is expected to contribute to improving nursing quality by offering it as a guide to evidence based practices for acute stroke care in Korea.

BIM 기반의 미시적 에너지 시뮬레이션에 관한 연구 -조도센서등의 조도 및 에너지 분석을 중심으로 (A Study of Microscopic Energy Simulation based on BIM - Illuminance & Energy Analysis of Illuminance Sensor Lighting)

  • 백지웅
    • 한국산학기술학회논문지
    • /
    • 제20권1호
    • /
    • pp.384-390
    • /
    • 2019
  • 친환경 저에너지 중점의 건축설계의 중요성이 점점 커져가고 있다. 또 한편으로는 좀 더 미시적인 관점의 에너지 절약 설계 기법이 요구되고 있다. 이러한 분위기 속에서 에너지 시뮬레이션의 필요성이 점차 증가하고 있으며, 특히 BIM 기반의 에너지 시뮬레이션은 높은 효율성으로 인해 주목받고 있다. 하지만 BIM의 데이터는 아직까지는 미시적인 에너지와 관련된 파라메터가 적용되어 있지 않다. 따라서 본 연구는 조도 센서에 의한 조명 제어 시뮬레이션을 통해 센서 조명 파라메터의 생성 필요성에 대해서 연구하고자 한다. 연구는 BIM을 통해 생성된 데이터를 바탕으로 조도 센서를 설치하고 조도 시뮬레이션을 통해 센서등의 스케줄 데이터를 생성하였다. 그리고 이렇게 생성된 스케줄 데이터를 바탕으로 에너지 시뮬레이션을 실시하여 소비전력의 감소율을 확인하였다. 연구에 따르면 조명에 따른 열부하량과 소비전력량이 각각 20%이상 감소하는 것으로 나타났다. 따라서 센서 조명 파라메터는 미시적인 에너지 절약 설계를 위해서 BIM 데이터 내에 생성될 필요가 있다고 판단된다. 본 연구는 센서 조명 파라메터의 생성에 국한된 것이 아니라, 이와 같이 미시적인 변인들을 검토하고 BIM 데이터 내에 적용할 필요가 있음을 밝히기 위해 수행되었다.

열화상 카메라를 이용한 통합 방역 시스템 개발 (Development of an Integrated Quarantine System Using Thermographic Cameras)

  • 정범진;이정임;서광덕;정경옥
    • 대한안전경영과학회지
    • /
    • 제24권1호
    • /
    • pp.31-38
    • /
    • 2022
  • The most common symptoms of COVID-19 are high fever, cough, headache, and fever. These symptoms may vary from person to person, but checking for "fever" is the government's most basic measure. To confirm this, many facilities use thermographic cameras. Since the previously developed thermographic camera measures body temperature one by one, it takes a lot of time to measure body temperature in places where many people enter and exit, such as multi-use facilities. In order to prevent malfunctions and errors and to prevent sensitive personal information collection, this research team attempted to develop a facial recognition thermographic camera. The purpose of this study is to compensate for the shortcomings of existing thermographic cameras with disaster safety IoT integrated solution products and to provide quarantine systems using advanced facial recognition technologies. In addition, the captured image information should be protected as personal sensitive information, and a recent leak to China occurred. In order to prevent another case of personal information leakage, it is urgent to develop a thermographic camera that reflects this part. The thermal imaging camera system based on facial recognition technology developed in this study received two patents and one application as of January 2022. In the COVID-19 infectious disease disaster, 'quarantine' is an essential element that must be done at the preventive stage. Therefore, we hope that this development will be useful in the quarantine management field.

체적골밀도 측정법 동향: 수술부위 골밀도 분석 (Volumetric Bone Mineral Density Measurement: for Surgery Specific Bone Volumes)

  • 이연수
    • 한국방사선학회논문지
    • /
    • 제16권1호
    • /
    • pp.53-59
    • /
    • 2022
  • CT영상을 기반으로 한 QCT는 CT장비와 컴퓨터영상처리기술의 발전과 함께 적은 방사선 투과양으로도 체적골밀도를 측정할 수 있는 방향으로 크게 발전하고 있다. 방사선 의료영상을 대표적인 골밀도 측정법인 이중방사선흡수계수법(DXA)은 척추나 근위대퇴골과 다른 뼈와의 상관성이 떨어지는 경우가 많고질량효과에 의한 부정확성의 근본 원인을 가지고 있기 때문에 체적골밀도측정법인 단일에너지CT영상을 이용한 QCT법이 가장 보편적인 정확한 골밀도 측정법이다. 이중에너지CT의 사용은 단단한 뼈와 동시에 종양이나 연부조직의 이상을 같이 볼 수 있는 영상을 얻을 수 있게 되어 QCT 골밀도와 함께 특정연부조직이나 장기를 검사할 수 있어 그 사용이 더욱 늘어날 것으로 예상된다. 임상수술이나 추적검사가 필요한 위치에 사용자가 해부학적으로 특정한 형상체적에 대한 국부골밀도측정 방법도 병원의 임상현장에서 활용할 기술로 대두되고 있다.

아두이노 메가 기반의 스마트 옷장 (Smart Closet based on Arduino MEGA)

  • 문세훈;이주현;이지민;박건희;한영오
    • 한국전자통신학회논문지
    • /
    • 제17권5호
    • /
    • pp.949-958
    • /
    • 2022
  • 현대인들은 개인별로 많은 종류의 옷을 가지고 있고 옷장은 단순히 옷을 보관하는 용도뿐만 아니라 옷장의 상태에 대한 관리가 중요해졌다. 본 논문에서는 스마트 옷장의 사용자는 일상생활의 편리함 및 최적의 옷장 상태를 제공하는 스마트 옷장을 제작하여 다양한 환경에서 사용 가능한 스마트 가구개발의 가능성을 제시하였다. 개발된 시스템에서 Arduino MEGA를 기반으로 블루투스 연결을 통한 앱 인벤터와 터치식 LCD를 사용해 옷장을 제어되며, 날씨에 따라 사용자에 어울리는 옷을 추천해준다. 또한 LCD 스크린을 통한 실시간 날씨 상태 확인, 필요에 따라 손쉽게 환기가 가능하도록 하여 시간 절약과 편리성에 의미를 둔 스마트 옷장을 설계하였다. 사용자의 적합한 옷을 어플리케이션으로 추천할 수 있도록 Arduino와 app inventor 프로그램을 통해 구현하였다.

Volumetric measurement of the tongue and oral cavity with cone-beam computed tomography: A systematic review

  • Kannitha Alina, Aflah;Winny, Yohana;Fahmi, Oscandar
    • Imaging Science in Dentistry
    • /
    • 제52권4호
    • /
    • pp.333-342
    • /
    • 2022
  • Purpose: The goal of this systematic review was to compare the use of cone-beam computed tomography (CBCT) with that of computed tomography (CT) for volumetric evaluations of the tongue and oral cavity. Materials and Methods: A search for articles was conducted in accordance with the Preferred Reporting Items for Systematic Review and Meta-analyses guidelines. The PubMed, Scopus, ScienceDirect, and SAGE Journals databases were searched for articles published between 2011 and 2021. Articles were screened and assessed for eligibility. Screening involved checking for duplication, reading the title and abstract, and reading the full text. Results: The initial search retrieved 25,780 articles. Application of the eligibility criteria yielded 16 articles for qualitative analysis. Multiple uses of CBCT were identified. In several studies, researchers assessed the volumetric correlation between tongue and oral cavity volumes, as well as other parameters. Post-treatment volumetric evaluations of the oral cavity were also reported, and the reliability of CBCT was assessed. The use of CT resembled that of CBCT. Conclusion: CBCT has been used in the evaluation of tongue and oral cavity volumes to assess correlations between those volumes and with the upper airway. It has also been used for volumetric evaluation after surgical and nonsurgical procedures and to assess the relationships between tongue volume, tooth position, occlusion, and body mass index. Participants with obstructive sleep apnea and malocclusion have been evaluated, and the reliability of CBCT has been assessed. In the included studies, CT was utilized for similar purposes as CBCT, but its reliability was not assessed.