• Journal of Korean Society of Forest Science
• /
• v.105 no.3
• /
• pp.321-329
• /
• 2016

To estimate the sediment discharge controlled by sediment-filled check-dam and thereby enhancing factor for check-dam design and dredging criteria, we surveyed slope failures and stream-bed fluctuation caused by geomorphic disturbances (i.e., landslides and debris flows) in Inje, Gangwondo. In general, check-dams play roles for restraining and controlling sediment discharge within a section under the design equilibrium gradient and a section under the design flood gradient, respectively. The results in this study showed same pattern: that is, the closed type check-dam, which has a design restraint sediment discharge of $2,111m^3$, estimated to control a sediment discharge of $3,996m^3$ in the stream section within 250 m right upper area immediately after the disturbances occurred in 2006. As a result, a design control sediment discharge of the check-dam was larger than its design restraint sediment discharge. This represents that the check-dam is still having an own function for controlling sediment discharge although it exceeded the designed capacity by the sediment discharged from upstream during the disturbances. Our finding suggests that the sediment discharge controlling of check-dam may need to be evaluated separately from its sediment discharge restraint. Currently, the country, however, does not consider the design control (or restraint) sediment discharges, based on the actual field survey, as criteria for check-dam design and/or dredging work. Therefore, the accumulation of the quantitative data is required to support that check-dam has functions for both restraining and controlling sediment discharge. This would be a way to develop our erosion control technology to the scientific technology equipped with a more objective and systematic aspects.

• The KIPS Transactions:PartB
• /
• v.13B no.4 s.107
• /
• pp.377-382
• /
• 2006

In this paper, two methods based on the use of morphology and pattern matching prior to detect classified defects automatically on the back light unit which is a part of display equipments are proposed. One is the template check method which detects small size defects by using closing and opening method, and the other is the block matching method which detects big size defects by comparing with four regions of uniform blocks. The TC algorithm also can detect defects on the non-uniform pattern of BLU by using revised Otsu method. The proposed method has been implemented on the automatic defect detection system we developed and has been tested image data of BLU captured by the system.

• Journal of the Korean Society of Costume
• /
• v.35
• /
• pp.281-292
• /
• 1997

Tatan is a symbol of kinship and belonging in Scotland and a badge of identity recognized all over the world. Alongside the powerful historical and national resonance to Tartan for Scots it has been borrowed repeatedly by fashion. The pattern compositionof Tartan check is formed as a typical cross stripes that vertical line and hrizontal line meets rectangulary. And its color is much various and rich than other check pattern. So its magnificient spec-tacle that various all kinds of colors is dyed in cloth is second to name. Today we are as likely to meet tartan in a couturier dress as in a kilt or plaid. Tartan is distinctive in colour style and de-sign. It conveys personality ceremony and drama. All these aspects of its character have contributed to tartan being one of the best-known and best-loved fabrics in the world. In other parts of Europe traditional checked patterns declined and disappeared but in Scotland tartan survived strongly jist as the bagpipes also European flourished Due to geographical and cultural circumstances Scots were able to develop and enhance tartan and its remarkable individuality ensured its sur-vival in spite of adverse political and economic pressures. Tartan has been adopted as the national dress of all Scots. Lowland and High-land providing a powerful form of national cultural and personal identity. Whether tra-ditional or a recent creation whether tra-ditional or a recent creation whether a symbol of nationality or a substitute for nationhood tartan is no mean achievement.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.174-182
• /
• 1998

This paper describes a research work of developing a computer-aided design and machining of irregular shaped-sheet metal product for blanking or piercing operation. An approach to the CAD/CAM system is based on the knowledge-based rules. Knowledge for the CAD/CAM system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD and in customer tool kit on the SmartCAM with a personal computer and is composed of nine modules, which are input and shape treatment, flat pattern-layout, production feasibility check, blank-layout, strip-layout, die-layout, data conversion, modelling, and post-processor module. Based on knowledge-based rules, the system is designed by considering several factors, such as material and thickness of product, complexities of blank geometry and punch profile, diameter and material of a wire, and availability of press. This system is capable of generating NC data automatically according to drawings of die-layout module. Results which are carried out in each module will provide efficiencies to the designer and the manufacturer of blanking or piercing die in this field.

• The Korean Journal of Health Service Management
• /
• v.6 no.2
• /
• pp.15-23
• /
• 2012

In this study, oral health promotion behaviors of employees, daily frequency of tooth brushing, tooth brushing method, brushing time, whether or not to use oral hygiene accessories, and regular dental check-up to investigate oral health status of workers to the workplace and was to provide basic data for the development of oral health program to promote oral health. This study was performed from 2011 May 2 to May 20, 249 industrial workers in Ulsan metropolitan city surveyed and collected data using PASW 18.0 ver, descriptive statistics, Pearson's chi-square test was performed. In the result, the importance of oral health recognition was lacked, in order to maintain and promote the oral health status of industrial workers, regular dental check-up on oral health counseling and oral health education were conducted together and raising awareness of workers' oral health was necessary to improve level of oral health status.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.3
• /
• pp.324-333
• /
• 2018

Children need regularly dental check-ups after dental treatment because there are a lot of changes of oral conditions such as tooth exfoliation and eruption, occlusion, and recurrence of dental caries. The purpose of this study is to determine the factors that affect the follow-up pattern after dental treatment under conscious sedation. Patients who were treated under sedation at the department of pediatric dentistry of Ewha Womans University Mokdong Hospital from 2009 to 2013 were included in this study. The final samples comprised of 562 patients that were classified into 4 groups according to the number of visits during 3 years. The chi-square test was used to determine the factors affecting regular follow-up. There were statistically significant differences between each treatment groups and factors such as the change of doctor, overall treatment time, the number of treated teeth under sedation, restorative treatment, minor operation, and preventive treatment (p < 0.05). This study identified factors that affect regular follow-up after dental treatment under conscious sedation. It is recommended to educate the importance of regular check-ups to parents who are less likely to return.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.840-845
• /
• 2001

Development of a small gas-turbine combustor for 100kW class APU(Auxiliary Power Unit) has been performed. This combustor is a reverse-annular type and has a tangential swirler in the liner head to improve the fuel/air mixing and flame stability. Three main and three pilot fuel injectors of the simplex pressure-swirl type are used. The performance target at the design condition includes a turbine inlet temperature of 1170K, a combustion efficiency of 99%, a pattern factor of 30%, and an engine durability of 3000 hours. Under developing the combustor, we conducted performance test of our first prototype(TS1) with some variants. As a result of the test, the performance targets of the combustor are satisfied except that the pattern factor is about 4% higher than target value. So, we redesigned the second prototype(TS2) and conduct performance test with the critical focus on pattern factor and exit mean temperature. We adopted TS2 four variant to check the improvement of pattern factor. As the result, the pattern factors of several variants were satisfied with the performance target. Finally, We chose the TS2A variant as a final combustor for our APU model.

• The KIPS Transactions:PartB
• /
• v.10B no.7
• /
• pp.811-814
• /
• 2003

In this paper, we propose a fast block-matching motion estimation method using the cross pattern and the hexagonal pattern. For the block-matching motion estimation method, full search finds the best motion estimation, but it requires huge search time because it has to check every search point within the search window. The proposed method makes use of the fact that most of motion vectors lie near the center of block. The proposed method first uses the cross pattern to search near the center of block, and then uses the hexagonal pattern to search larger motion vectors. Experimental results show that our method is better than recently proposed search algorithms in terms of mean-square error performance and required search time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11B
• /
• pp.1020-1029
• /
• 2008

This paper proposes an high speed pattern matching algorithm and its implementation. The pattern matcher is used to check patterns from realtime input packet. The proposed algorithm can find exact string, range of string values, and combination of string values from input packet at high speed. Given string and rule set are modelled as a state transition graph which can find overlapped strings simultaneously, and the state transition graph is partitioned according to input implicants to reduce implementation complexity. The pattern matcher scheme uses the transformed state transition graph and input packet as an input. The pattern matcher was modelled and implemented in VHDL language. Experimental results show the proprieties of the proposed approach.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.213-216
• /
• 2007

LGP (light guide plate) of LCD-BLU (Liquid Crystal Display - Back Light Unit) is one of the major components which affects the product quality of LCD. In the present study, the optical patterns of LGP(2.2") are manufactured by three different methods, namely, laser ablation, chemical etching and LiGA - reflow, respectively. The pattern surface images and roughness of mold and product were compared to check the optical characteristics. From the results of measurement the optical patterns fabricated by LiGA - reflow method showed the best geometric structure as intended in design and the lowest roughness among those.