• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.12
• /
• pp.715-732
• /
• 2009

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2008. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends in thermal and fluid engineering have been surveyed in the categories of general fluid flow, fluid machinery and piping, new and renewable energy, and fire. Well-developed CFD technologies were widely applied in developing facilities and their systems. New research topics include fire, fuel cell, and solar energy. Research was mainly focused on flow distribution and optimization in the fields of fluid machinery and piping. Topics related to the development of fans and compressors had been popular, but were no longer investigated widely. Research papers on micro heat exchangers using nanofluids and micro pumps were also not presented during this period. There were some studies on thermal reliability and performance in the fields of new and renewable energy. Numerical simulations of smoke ventilation and the spread of fire were the main topics in the field of fire. (2) Research works on heat transfer presented in 2008 have been reviewed in the categories of heat transfer characteristics, industrial heat exchangers, and ground heat exchangers. Research on heat transfer characteristics included thermal transport in cryogenic vessels, dish solar collectors, radiative thermal reflectors, variable conductance heat pipes, and flow condensation and evaporation of refrigerants. In the area of industrial heat exchangers, examined are research on micro-channel plate heat exchangers, liquid cooled cold plates, fin-tube heat exchangers, and frost behavior of heat exchanger fins. Measurements on ground thermal conductivity and on the thermal diffusion characteristics of ground heat exchangers were reported. (3) In the field of refrigeration, many studies were presented on simultaneous heating and cooling heat pump systems. Switching between various operation modes and optimizing the refrigerant charge were considered in this research. Studies of heat pump systems using unutilized energy sources such as sewage water and river water were reported. Evaporative cooling was studied both theoretically and experimentally as a potential alternative to the conventional methods. (4) Research papers on building facilities have been reviewed and divided into studies on heat and cold sources, air conditioning and air cleaning, ventilation, automatic control of heat sources with piping systems, and sound reduction in hydraulic turbine dynamo rooms. In particular, considered were efficient and effective uses of energy resulting in reduced environmental pollution and operating costs. (5) In the field of building environments, many studies focused on health and comfort. Ventilation. system performance was considered to be important in improving indoor air conditions. Due to high oil prices, various tests were planned to examine building energy consumption and to cut life cycle costs.

• The Korean Journal of Archival Studies
• /
• no.18
• /
• pp.3-36
• /
• 2008

Despite the institutional, organizational, and technological advances in the level of national records management that has occurred during the past several years, there has been no significant change in the condition of records management within individual public institutions, which may be an outset for records management. In order to begin the advance in national records management with overall innovation in records management by public institutions, it is necessary to distinctly set up the direction of innovation and a project to carry out. Also, a person in charge of records management, who is supposed to lead records management in each institution, should share the directions and projects. Against this backdrop, this study aims to define "the evaluation of records management" as a vehicle to establish a common goal for the innovation of records management and the role of a person in charge of records management as well as to develop evaluation indicators that might be applicable to all public institutions. With this aim, the study drew requirements of records management from domestic and overseas cases in the evaluation of records management conditions as well as the laws and standards of records management, and a roadmap for national records management innovation. Then, the study developed evaluation indicators by classifying the requirements according to three areas involving an organizational environment, records management job, and records management in the offices that create and file their own documents. The organizational environment area is concerned with the evaluation of the records management policy and the responsibility of an institution, and the evaluation of human resources and physical environment. The records management business area includes the measurement of the level of jobs, such as the records creation control conducted by the records management authority of each institution, the management of records schedules, the accession, preservation, and appraisal of records and their service, and the monitoring of records management. The area of records management in the offices is composed of the creation, registration, arrangement, and transfer of records as they are intended to be used during the monitoring of records management conditions. The study made it possible to measure all evaluation indicators with a quantitative evaluation method by clearly proposing the standard for objective and accurate evaluation.

• Journal of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.441-448
• /
• 1986

Dioxobis(sub.-salicylaldiminato) molybdenum (VI) complexes, $MoO_2\;(X-sal-N-R)_2,\;(X=H,\;5-CH_3,\;R=C_6H_5,\;p-F-C_6H_4,\;m-Cl-C_6H_4,p-I-C_6H_4\;and\;p-C_2H_5-C_6H_4)$, have been prepared by reactions of dioxobis(sub.-salicylaldehydato) molybdenum (VI), $MoO_2(X-sal)_2$ with primary amines, in which $MoO_2(X-sal)_2$ complexes were obtained by acidification of a mixture solution of ammonium paramolybdate in water and appropriate salicylaldehyde in methanol. All these complexes show two strong Mo=O stretching imodes in the 900-940$cm^{-1}$ and p.m.r. spectra exhibited only one signal for the azomethine group. These results confirmed that the complexes are six-coordinated octahedron with a $cis-MoO_2$ group and the geometrical configurations of the complexes possess a C2 axis of symmetry. From the mass analyses of the complexes, it found that the composition ratios of $MoO_2$ : ligand are 1 : 2. The charge transfer transition corresponding to N-Mo, and O-Mo occured at 29,000$cm^{-1}$ and 32,000$cm^{-1}$ respectively. Where, the complexes were found to be non-ionic materials by conductivity measurements in dimethylformamide.

• Journal of Korean Academy of Nursing
• /
• v.30 no.5
• /
• pp.1156-1169
• /
• 2000

The study was aimed at developing an independent hospice center model that would be best suited for Korea based on a literature review and the current status of local and international hospices. For the study, five local and six international hospice organizations were surveyed. Components of the hospice center model include philosophy, purpose, resources (workers, facilities, and equipment), allocation of resources, management, financial support and hospice team service. The following is a summary of the developed model: Philosophies for the hospice center were set as follows: based on the dignity of human life and humanism, help patients spend the rest of their days in a meaningful way and accept life positively. On the staff side, to pursue a team-oriented holistic approach to improve comfort and quality of life for terminally ill persons and their families. The hospice center should have 20 beds with single, two, and four bed rooms. The center should employ, either on a part-time or full-time basis, a center director, nurses, doctors, chaplains, social workers, pharmacists, dieticians, therapists, and volunteers. In addition, it will need an administrative staff, facility managers and nurses aides. The hospice should also be equipped with facilities for patients, their families, and team members, furnished with equipment and goods at the same level of a hospital. represented by a center director who reports to a board and an advisory committee. Also, the center director administers a steering committee and five departments, namely, Administration, Nursing Service, Social Welfare, Religious Services, and Medical Service. Furthermore, the center should be able to utilize a direct and support delivery systems. The direct delivery system allows the hospice center to receive requests from, or transfer patients to, hospitals, clinics, other hospice organizations (by type), public health centers, religious organizations, social welfare organizations, patients, and their guardians. On the other hand, the support delivery system provides a link to outside facilities of various medical suppliers. In terms of management, details were made with regards to personnel management, records, infection control, safety, supplies and quality management. For financial support, some form of medical insurance coverage for hospice services, ways to promote a donation system and fund raising were examined. Hospice team service to be provided by the hospice center was categorized into assessment, physical care, emotional care, spiritual care, bereavement service, medication, education and demonstrations, medical supplies rental, request service, volunteer service, and respite service. Based on the results, the study has drawn up the following suggestions: 1. The proposed model for a hospice center as presented in the study needs to be tested with a pilot project. 2. Studies on criteria for legal approval and license for a hospice center need to be conducted to develop policies. 3. Studies on developing a hospice charge system and hospice standards that meet local conditions in Korea need to be conducted.

• Journal of the Korean Chemical Society
• /
• v.24 no.5
• /
• pp.380-392
• /
• 1980

Six coordinate low spin iron(Ⅱ) complexes of vicinal-dioximes, [Fe$(DH)_2B_2$] and [Fe$(DH)_2$B(CO)]($(DH)_2$=$(CHDH)_2$(bis(1,2-cyclohexadinedioximato) bivalent anion), $(DPGH)_2$-(bis(diphenylglyoximato) bivalent anion), $(F{\alpha}DH)_2(bis(furil-{\alpha}-dioximato)$ bivalent anion); B = monodentate neutral nitrogen base), have been prepared and their physical properties have been investigated with respect to the effects of the equatorial ligands, $(DH)_2$. The order of ${\pi}$-acceptor CO stretching frequency for [Fe$(DH)_2$B(CO)] is $(F{\alpha}DH)_2$ > $(DPGH)_2$> $(CHDH)_2$, while non-${\pi}$-acceptor $NH_3$ stretching frequencies for [Fe$(DH)_2(NH_3)_2$] show the opposite order to that of CO, i.e., $(CHDH)_2$ > $(DPGH)_2$ > $(F{\alpha}DH)_2$. These infrared spectral data together with Fe-N (oxime) and Fe-N (oxime) and Fe-N (B) stretching frequency data suggest that the nitrogen atoms of $(CHDH)_2$ are more basic and poorer ${\pi}$-acceptors than the corresponding nitrogen atoms of $(DPGH)_2$ and $(F{\alpha}DH)_2$, respectively. It has been found from the electronic spectral data of [Fe$(DH)_2$] and [Fe$(DH)_2$B(CO)] that the energy of the charge transfer band from iron(Ⅱ) to $(DH)_2$ increases as the basicity of $(DH)_2$ increases.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.12
• /
• pp.1946-1952
• /
• 2005

New group 15 organometallic compounds, M$(phenanthrenyl)_3$ (M = P (1), Sb (2), Bi (3)) have been prepared from the reactions of 9-phenanthrenyllithium with $MCl_3$. A reaction of 9-(diphenylphosphino)phenanthrene with 2,6-diisopropylphenyl azide led to the formation of (phenanthrenyl)${(Ph)}_2P$=N-(2,6-$^iPr_2C_6H_3$) (4). The crystal structures of 2 and 4 have been determined by single-crystal X-ray diffractions, both of which crystallize with two independent molecules in the asymmetric unit. Compound 2 shows a trigonal pyramidal geometry around the Sb atom with three phenanthrenyl groups being located in a screw-like fashion with an approximately $C_3$ symmetry. A significant amount of CH- -$\pi$ interaction exists between two independent molecules of 4. The phosphorus center possesses a distorted tetrahedral environment with P-N bond lengths of 1.557(3)$\AA$ (P(1) N) and 1.532(3)$\AA$ (P(2)-N), respectively, which are short enough to support a double bond character. One of the most intriguing structural features of 4 is an unusually diminished bond angle of C-N-P, attributable to the hydrogen bonding of N(1)-H(5A) [ca. 2.49$\AA$ between two adjacent molecules in crystal packing. The compounds 1-3 show purple emission both in solution and as films at room temperature with emission maxima ($\lambda_{max}$) at 349, 366, and 386 nm, respectively, attributable to the ligand centered $\pi$ $\rightarrow$ $\pi^\ast$ transition in phenanthrene contributed by the lone pair electrons of the Gp 15 elements. Yet the nature of luminescence observed with 4 differs in that it originates from $\pi$ (diisopropylbenzene)-$\pi^\ast$ (phenanthrene) transitions with the $\rho\pi$contribution from the nitrogen atom. The emission maximum of 4 is red-shifted ranging 350-450 nm due to the internal charge transfer from the phenanthrenyl ring to the N-arylamine group as deduced from the ab initio calculations.

• Journal of the Korean Ceramic Society
• /
• v.42 no.4
• /
• pp.251-259
• /
• 2005

In order to characterize the influence of the reaction-site density on the cathodic polarization property of LSCF, we chose the porosity of LSCF as a main controlling variable, which is supposed to be closely related with active sites for the cathode reaction. To control the porosity of cathodes, we changed the mixing ratio of fine and coarse LSCF powders. The porosity and pore perimeter of cathodes were quantitatively analyzed by image analysis. The electrochemical half cell test for the cathodic polarization was performed via 3-probe AC-impedance spectroscopy. According to the investigation, the reduction of oxygen at LSCF cathode was mainly controlled by following two rate determining steps; i) surface diffusion and/or ionic conduction of ionized oxygen through bulk LSCF phase, ii) charge transfer of oxygen ion at cathode/electrolyte interface. Moreover, the overall cathode polarization was diminished as the cathode porosity increased due to the increase of the active reaction sites in cathode layer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.5
• /
• pp.393-399
• /
• 2020

A series of phosphors, SrWO₄:5 mol% Dy³⁺, SrWO₄:5 mol% Sm³⁺, and SrWO₄:5 mol% Dy³⁺:x Sm³⁺ (x＝1~15 mol%), were prepared using a facile co-precipitation. The crystal structure, morphology, photoluminescence properties, and application in anti-counterfeiting fields were investigated. The crystalline structures of the prepared phosphors were found to be tetragonal systems with the dominant peak occurring at the (112) plane. The excitation spectra of the Dy³⁺ singly-doped SrWO₄ phosphors were composed of an intense charge-transfer band centered at 246 nm in the range of 210~270 nm and two weak peaks at 351 nm and 387 nm due to the ⁶H_15/2→⁶P_7/2 and ⁶H_15/2→⁴I_13/2 transitions of Dy³⁺ ions, respectively. The wavelength of 246 nm was optimum for exciting the luminescence of Dy³⁺ and Sm³⁺ co-doped SrWO₄ phosphors. The emission spectra consisted of two intense blue and yellow emission bands at 480 nm and 573 nm corresponding to the ⁴F_9/2→⁶H_15/2 and ⁴F_9/2→⁶H_13/2 transitions of Dy³⁺, and two strong emission peaks at 599 nm and 643 nm originating from the ⁴G_5/2→⁶H_7/2 and ⁴G_5/2→⁶H_9/2 transitions of Sm³⁺, respectively. As the concentration of Sm³⁺ ions increased, the emission intensities of Dy³⁺ rapidly decreased, while the emission intensities of Sm³⁺ gradually increased. These results suggest that the color of the emission light can be tuned from yellow to white by changing the concentration of Sm³⁺ ions at a fixed 5 mol% Dy³⁺. Furthermore, the fluorescent security inks were synthesized for use in anti-counterfeiting applications.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.6
• /
• pp.527-534
• /
• 2015

This study offers a novel method for improving the physical contact between the anode and fuel in a direct carbon fuel cell (DCFC): a direct generation of carbon in a porous Ni anode through the thermal decomposition of gaseous hydrocarbons. Three kinds of alkane hydrocarbons with different carbon numbers (CH4, C2H6, and C3H8) are tested. From electron microscope observations of the carbon particles generated from each hydrocarbon, we confirm that more carbon spheres (CS), carbon nanotubes (CNT), and carbon nanofibers (CNF) were identified with increasing carbon number. Raman scattering results revealed that the carbon samples became less crystalline and more flexible with increasing carbon number. DCFC performance was measured at $700^{\circ}C$ with the anode fueled by the same mass of each carbon sample. One-dimensional carbon fuels of CNT and CNF more actively produced and had power densities 148 and 210 times higher than that of the CS, respectively. This difference is partly attributed to the findings that the less-crystalline CNT and CNF have much lower charge transfer resistances than the CS.

• Journal of the Korean Society of Radiology
• /
• v.9 no.1
• /
• pp.39-45
• /
• 2015

$La_2W_3O_{12}:Eu^{3+}$ phosphors were prepared by solid state reaction method. The crystal structure was characterized by XRD pattern and ICSD card (78180). Luminescence properties of $La_2W_3O_{12}:Eu^{3+}$ are investigated by optical and laser-excitation spectroscopy in which emission and excitation spectra and time-resolved spectra are measured. The 1 mol % $Eu^{3+}$-doped $La_2W_3O_{12}$ phosphor exhibits broad excitation band peaking at 286 nm due to the ligand-to-metal charge transfer transition. The excitation lines due to the $^7F_0{\rightarrow}{^5D_4},{^5D_4},{^5L_6},{^5G_4},{^5D_3},{^5D_2}$ transitions of $Eu^{3+}$ are observed in the wavelength region 350-500 nm. The strong line emission is observed at 618 nm corresponding to the due to the $^5D_0{\rightarrow}^7F_2$ transition. The lifetime of 618 nm emission decreases with increasing temperature as 7 K ($114{\mu}s$), 100 K ($94{\mu}s$), 200 K ($10{\mu}s$) and 300 K ($0.5{\mu}s$).