• 한국응용과학기술학회지
• /
• 제17권1호
• /
• pp.29-35
• /
• 2000

In this study, ultra-thin films of (N-docosyl quinolinium)-TCNQ(1:2) complex were prepared on the hydrophilic substrate by Langmuir-Blodgett(LB) technique. The characteristics of ${\pi}-A$ isotherms were studied to find optimum conditions of deposition by varying temperature of subphase, compression speed of barrier and amount of spreading solution. Using UV-vis spectra, capacitance and thickness, deposition of LB films was confirmed together with the thickness of the naturally oxidized aluminum film inside a device and dielectric constant of (N-docosyl quinolinium)-TCNQ(1:2) complex. The dielectric constant of LB film was about $4.59{\sim}5.58$. The electrical properties of (N-docosyl quinolinium)-TCNQ(1:2) complex were investigated at room temperature. The conductivity of this film measured by the direction of either vertical or horizontal axis was found to have a quite different value.

• 한국군사과학기술학회지
• /
• 제9권3호
• /
• pp.12-19
• /
• 2006

A gun barrel of infantry fighting vehicle is supported like a type of cantilever. Temperature of a gun barrel is increased by heat transfer due to the combustion of propellant charge during the firing. Thus, the muzzle of a gun barrel is deflected in accordance with its temperature and the accuracy rate is decreased by deflection of the muzzle. In this study, deflection of a gun barrel is estimated by measuring its restoration rate because measuring the deflection rate is difficult due to the vibration of the gun barrel during the firing. In order to obtain the relations between deflection rate and restoration rate of the 40mm gun barrel of Next Infantry Fighting Vehicle(NIFV) under varying temperature, measurement of deflection rate and restoration rate is carried out using 5.56mm Remington rifle barrel. Effect of the estimated deflection rate of a gun barrel of NIFV on the hit probability is also analyzed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1573-1576
• /
• 2007

ABCV-Py, a new red fluorescent material, in which two identical electron donor (dimethylamino group) and acceptor (cyano group) moieties are linked to two independent biphenyl groups which share the same core phenyl, has been synthesized for use in OLED application. Performance of red doped electroluminescent devices using ABCV-Py as dopant were measured with various host materials, $Alq_3$, CBP, DPVBi, and p-terphenyl. The performance of device with DPVBi host material was better than those with other host materials and high doping concentration could be applied on device with ABCV-Py as dopant.

• 설비공학논문집
• /
• 제10권6호
• /
• pp.763-772
• /
• 1998

The effects of an inserted coil on flow patterns and heat transport performance for a horizontal rotating heat pipe have been studied experimentally. Especially, the present study is to see an internally inserted helical coil inside a RHP would lead to the same kind of results as internal fins. Visualization test conducted for an acryl tube, charged water with at a volumetric rate of 20%. When the flow kept pool regime at a low RPM(less than 1,000 RPM), the movement of coil forced the water to flow in axial direction. But this pumping effect of coil disappeared, when the pool regime changed to annular one which could be created by increasing RPM. The pumping effects for RHP with an inserted coil resulted enhancement both in condensation heat transfer coefficient and heat transport limitation, as obtained in case of using internal fins. But all these effects became negligible in the range of higher RPM(above 1,000∼1,200) with the transition of flow regime to annular flow.

• 대한화학회지
• /
• 제39권5호
• /
• pp.338-343
• /
• 1995

피부에 대한 광증감 효과를 나타내는 소랄렌의 유도체중 8-azapsoralen and 4,4',5'-trimethyl-8-azapsoralen과 티민의 전자상태를 반경험적 분자궤도법으로 고찰하였다. 소랄렌 유도체와 티민 사이의 분자착물 형성에서 가능성 있는 배치를 결정하기 위하여 들뜬 상태의 azapsoralen과 바닥상태의 티민의 전하 이동량을 결정하고, 반응 위치인 3,4-탄소와 4'5'-탄소 이중결합과의 광부가 생성물의 입체구조는 trans-anti형의 Azaps(3,4)<>Thy(5,6) 결합과 4,4',5'-trimethyl-8-azapsoralen (3,4) < > Thymine(5,6) 결합을 형성한다는 사실을 알았다.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3671-3676
• /
• 2013

A series of carbon nanotube, $C_{60}$, and graphene modified $TiO_2$ nanocomposites were prepared by hydrothermal method. X-ray diffraction, $N_2$ adsorption, UV-Vis spectroscopy, photoluminescence, and Electrochemical impedance spectra were used to characterize the prepared composite materials The results reveal that incorporating $TiO_2$ with carbon materials can extend the adsorption edge of all the $TiO_2$-carbon nanocomposites to the visible light region. The photocatalytic activities were tested in the degradation of 2,4,6-trichlorophenol (TCP) under visible light. No obvious difference in essence was observed in structural and optical properties among three series of carbon modified $TiO_2$ nanocomposites. Three series of carbon materials modified $TiO_2$ composites follow the analogous tentative reaction mechanism for TCP degradation. GR modified $TiO_2$ nanocomposite exhibits the strongest interaction and the most effective interfacial charge transfer among three carbon materials, thus shows the highest electron-hole separation rate, leading to the highest photocatalytic activity and stability.

• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2553-2559
• /
• 2011

Two novel quinacridone (QNC) dyes with thiophene or benzene-conjugated bridge and cyanoacrylic acid acceptor were first designed and synthesized for use in dye-sensitized solar cells (DSSCs). The absorption spectra, electrochemical and photovoltaic properties of these dyes were investigated. Under simulated AM 1.5G irradiation conditions, the solar cell based on the quinacridone dye containing thiophene as a bridge unit had a short-circuit photocurrent density of 8.51 $mA{\cdot}cm^{-2}$, an open-circuit voltage of 643.6 mV, and a fill factor of 0.70, corresponding to an overall conversion efficiency of 3.86%.

• 대한지리학회지
• /
• 제32권2호
• /
• pp.229-244
• /
• 1997

개혁 이전에 정책적으로 강력히 억제된 중국의 도시화는 개혁 이후 상품 경제의 발달로 변화되었다. 그 과정에서 농촌 중심지인 소성진이, 급격한 도시화를 막고 농업부문의 잉여노동력을 흡수할 수 있는 역할이 부각되어 양적ㆍ질적인 성장을 하였다. 소성진은 농업부문의 구조조정, 농촌 공업화의 규모화, 잉여 노동력의 해소의 역할을 하면서 한편으로는 왜곡된 중국 취락 체계의 회복과 상품경제로 성장한 농촌주민들의 도시 진입 욕구를 해결하는 도구로서 작용하였다. 소성진화 과정은 비록 과도적 단계이지만 공간 정책을 통해 전반적인 사회의 혼란을 최소화하는 긍정적인 역할을 수행하고 있다.

• Journal of Electrochemical Science and Technology
• /
• 제6권4호
• /
• pp.146-151
• /
• 2015

Here I report an electrochemical simulation work that compares voltammetric current and resistance of a complex electrochemical reaction over a potential scan. For this work, the finite element method is employed which are frequently used for voltammetry but rarely for impedance spectroscopy. Specifically, this method is used for simulation of a complex reaction where a heterogeneous faradaic reaction is followed by a homogeneous chemical reaction. By tracing the current and its polarization resistance, I learn that their relationship can be explained in terms of rate constants of charge transfer and chemical change. An unexpected observation is that even though the resistance is increased by the rate of the following chemical reaction, the current can be increased due to the potential shift of the resistance made by the proceeding faradaic reaction. This report envisions a possibility of the FEM-based resistance simulation to be applied to understand a complex electrochemical reaction. Until now, resistance simulations are mostly based on equivalent circuits or complete mathematical equations and have limitations to find proper models. However, this method is based on the first-principles, and is expected to be complementary to the other simulation methods.

• Journal of Electrochemical Science and Technology
• /
• 제11권3호
• /
• pp.238-247
• /
• 2020

Some nano structured bimetallic NiPd electrocatalysts were electrodeposited on glassy carbon electrodes using a double potential step chronoamperometry. The morphology of the electrodeposited samples was investigated by field emission-scanning electron microscopy, while their compositions were evaluated using energy dispersive X-ray spectroscopy. It was observed that the electrodeposited samples contained a low Ni content, in the range of 0.80 - 7.10%. The electrodeposited samples were employed as the anode electro-catalysts for the oxidation of sodium borohydride in NaOH solution (1.0 M) using cyclic voltammetry, chronoamperometry, rotating disk electrode, and impedance spectroscopy. The number of exchanged electrons, charge transfer resistances, apparent rate constants, and double layer capacitances were calculated for the oxidation of borohydride on the prepared catalysts. According to the results obtained, the NiPd-2 sample with the lowest Ni content (0.80%), presented the highest catalytic activity for borohydride oxidation compared with the other NiPd samples as well as the pure Pd sample. The anodic peak current density was obtained to be about 1.3 times higher on the NiPd-2 sample compared with that for the Pd sample.