• 한국분말재료학회지
• /
• 제13권2호
• /
• pp.112-118
• /
• 2006

[ $R_{1/3}Sr_{2/3}FeO_{3}$ ](R=Pr, Nd, and Sm) was synthesized and their magnetic properties and charge ordering(CO) transition related with lattice dynamics and oxygen vacancy were systematically investigated. The charge disproportion ation(CD) in $R_{1/3}Sr_{2/3}FeO_{3}$(R=Pr,Nd) was in which two kins of iron with valence state $Fe^{3+}$ and $Fe^{5+}$ were found with ratio of 2:1. In this charge ordering state a sequence of $Fe^{3+}Fe^{3+}Fe^{5+}Fe^{3+}Fe^{3+}Fe^{5+}$ exists aligned along the [111] direction of the pseudocubic perovskite structure. The charge ordering exist in distorted structure involving $t_{pd}$ hybridization. The disordering phases coexist in distorted structure as temprature in creases that is controlled amount of oxygen vacancy. The magnetic hyperfine fields indicate charge tranfering temperature as it dissapeared drastically.

• Journal of Astronomy and Space Sciences
• /
• 제21권4호
• /
• pp.343-350
• /
• 2004

수소와의 충돌에 의한 전하교환은 천체플라즈마의 물리적 특성에 매우 중요한 영향을 미친다. 이 논문에서는 탄소, 질소 및 산소에 대해 전하교환(charge exchange)을 고려하여 약 1,000--80,000K의 온도에서의 충돌이온화평형(collisional ionization equilibrium)상태를 연구하였다. 온도에 따른 이온함량비(ionic abundance fraction)를 기존의 전하교환을 고려하지 않은 경우와 비교하였다. 이 논문에서 계산된 이온함량비는 충돌이온화평형상태의 중온성간물질(warm interstellar medium, $T{\sim}10^4K$)의 분광학적인 특성을 이해하는데 사용될 수 있다. 또한, 산소의 이온화정도(degree of ionization)와 수소의 이온화정도의 비율이 충돌이온화가 중요하지 않은 경우에 잘 알려진 값과 많은 차이가 있음을 발견하였다. 이 차이는 중온성간물질에서의 충돌이온화에 대한 연구가 필요함을 의미한다.

• Bulletin of the Korean Chemical Society
• /
• 제23권1호
• /
• pp.71-74
• /
• 2002

The apparent barrier height for charge transfer through an interfacial water layer between a Pt/Ir tip and a gold surface has been measured using STM technique. The average thickness of the interfacial water layer inside an STM junction was controlled by the amount of moisture. A thin water layer on the surface was formed when relative humidity was in the range of 10 to 80%. In such a case, electron tunneling through the thin water layer became the majority of charge transfers. The value of the barrier height for the electron tunneling was determined to be 0.95 eV from the current vs. distance curve, which was independent of the tip-sample distance. On the other hand, the apparent barrier height for charge transfer showed a dependence on tip-sample distance in the bias range of 0.1-0.5 V at a relative humidity of approximately 96%. The non-exponentiality for current decay under these conditions has been explained in terms of electron tunneling and electrochemical processes. In addition, the plateau current was observed at a large tip-sample distance, which was caused by electrochemical processes and was dependent on the applied voltage.

• 대한화학회지
• /
• 제39권8호
• /
• pp.598-603
• /
• 1995

3-피콜린과 파라치환 브롬화벤질류의 반응을 온도와 압력 및 치환기 변화에 따라 속도론적으로 연구하였다. 속도상수로부터 활성화 파라미터들과 Hammett .rho.값을 계산하였다.결과적으로 반응중심에는 양의 전하가 진전되고 결합형성 보다는 결합파괴가 촉진됨을 알 수 있었다. 압력증가에 따라 반응 속도와 전하이동능력은 증가하고, 낮은 온도에서의 전하이동에 대한 압력효과가 더욱 크게 작용하고 있음을 알 수 있다.

• Journal of Electrochemical Science and Technology
• /
• 제7권2호
• /
• pp.179-184
• /
• 2016

The interface between the surface of a cathode material and the electrolyte gives rise to surface reactions such as solid electrolyte interface (SEI) and chemical side reactions. These reactions lead to increased surface resistance and charge transfer resistance. It is consequently necessary to improve the electrochemical characteristics by suppressing these reactions. In order to suppress unnecessary surface reactions, we coated cathode material using polypropylene (PP). The PP coating layer effectively reduced the SEI film that is generated after a 4.3 V initial charging process. By mitigating the formation of the SEI film, the PP-coated Li[(Ni_0.6Co_0.1Mn_0.3)_0.36(Ni_0.80Co_0.15Al0.05)_0.64)]O₂(NCS) electrode provided enhanced transport of Li⁺ ions due to reduced SEI resistance (R_SEI) and charge transfer resistance (R_ct). The initial charge and discharge efficiency of the PP-coated NCS electrode was 96.2 % at a current density of 17 mA/g in a voltage range of 3.0 ~ 4.3 V, whereas the efficiency of the NCS electrode was only 94.7 %. The presence of the protective PP layer on the cathode improved the thermal stability by reducing the generated heat, and this was confirmed via DSC analysis by an increased exothermic peak.

• Bulletin of the Korean Chemical Society
• /
• 제6권3호
• /
• pp.145-148
• /
• 1985

The effect of anionic polyelectrolytes, poly(styrenesulfonate) (PSS) and poly(vinylsulfonate) (PVS), on the charge transfer complexing between indole derivatives and methyl viologen($MV^{++}$) cation was investigated. The results were compared with effect of NaCl and an anionic surfactant, sodium dodecylsulfate (SDS). Both PSS and PVS enhanced the complex formation of neutral species (indole and indole acetate at low pH), zwitter ionic tryptophan, and positively charged tryptamine and tryptophan at low pH with $MV^{++}$. This result was attributed to the contribution of hydrophobic interaction, in addition to electrostatic interaction. The enhancing effect of PSS was much higher than that of PVS reflecting the higher hydrophobicity of PSS. The interaction between indole acetate anion and $MV^{++}$ was greatly reduced by addition of PVS and PSS. The higher charge density of PVS was appeared as greater reducing effect indicating the importance of electrostatic force in this case. In all cases, the effect of polyelectrolytes showed maxima, and further addition of PVS and PSS decreased the effect. This behavior was explained in terms of distribution of indole derivatives and $MV^{++}$ in domain of polyanions. The complex formation constants and molar absorptivities of complexes were determined, and the values were compared with those in water and SDS solutions.

• 한국수소및신에너지학회논문집
• /
• 제8권1호
• /
• pp.31-41
• /
• 1997

In order to investigate the mechanism of electrochemical hydrogenation reaction on Zr-based Laves phase hydrogen storage alloy electrodes, electrochemical charge/discharge characteristics, potentiostatic/dynamic polarizations and electrocehmical impedance spectroscopy(EIS) of Zr-Ti-Mn-Ni and Zr-Ti-Mn-Ni-M(M=Fe, Co, Al) alloys were examined. Electrochemical discharge capacities of the alloys were quite different with gas charge capacities. Therefore, it was considered that discharge capacities of the alloys depend on electrochemical kinetic factors rather then thermodynamic ones. Discharge efficiencies were increased linearly with exchange current densities. The results of potentiostatic/dynamic polarization measurements showed that electrochemical charge and discharge reaction of Zr-based Laves phase hydrogen storage alloys is controlled by charge transfer process at the electrode surface. The EIS measurements also confirmed this result.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.283-287
• /
• 2002

To remedy both the degradation and saturation of the output voltages in the modified Dickson pump. a new multi-stage charge pump circuit is presented in this paper. Here using PMOS charge-transfer switches instead of NMOS ones eliminates the necessity of diode-configured output stage in the modified-Dickson pump, achieving the improved voltage pumping gain and its output voltages proportional to the stage numbers. Measurement indicates that VOUT/3VDD of this new pump circuit with two stages reaches to a value as high as 0.94 even with low VDD=1.0 V, strongly addressing that this scheme is very favorable at low-voltage memory applications.

• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.469-472
• /
• 2012

Intensity modulated photocurrent spectroscopy and intensity modulated photovoltage spectroscopy were investigated to measure the dynamic response of charge transfer and recombination in the standard, $TiCl_4$-treated and the combined scattering layer electrode dye-sensitized solar cells (DSSCs). IMPS and IMVS provided transit time ($\tau_n$), lifetime ($\tau_r$), diffusion coefficient ($D_n$) and effective diffusion length ($L_n$). These expressions are derived that generation, collection, and recombination of electrons in a thin layer nanocrystalline DSSC under conditions of steady illumination and with a superimposed small amplitude modulation. In this experimental, IMPS/IMVS showed that the main effect of $TiCl_4$ treatment is to suppress the recombination of photogenerated electrons, thereby extending their lifetime. And the Diffusion coefficient of combined scattering layer electrode is $6.10{\times}10^{-6}$ higher than that of the others, resulting in longer diffusion length.

• Corrosion Science and Technology
• /
• 제3권1호
• /
• pp.1-5
• /
• 2004

A polarization resistance is generally used to estimate the corrosion rate in the corrosion monitoring by an electrochemical impedance method. When the Faradaic impedance has a time constant due to the reaction intermediate, the electrochemical impedance describes more than one loop on the complex plane. For example, the electrochemical impedance of iron in acidic solution shows capacitive and inductive loops on the complex plane. In this case, the charge transfer resistance and the polarization resistance are determined at middle and low frequency ranges, respectively. Which should be selected for corrosion resistance in corrosion monitoring, the charge transfer resistance or the polarization resistance'? In the present paper, the above-mentioned question is examined theoretically and experimentally.