• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.336-338
• /
• 1991

Effects of $Nb_2O_5$ addition ranged from 0.0 to 0.75(wt%) on the microstructure and electrical porperties of PZT ceramics have been investigated. The Pb vacancy concentration increases with increasing NbO content. However, the experimental results show the resistivity increases with increasing $Nb^{5+}$ content. This behavior can be explained as a compensation effect and $Nb^{5+}$ can serve as a donar and contribute electrons to the conduction process. According to the law of mass action, this result may reduce the total charge carrier:thus the resistivity increase with NbO content in PZT.

• Proceedings of the KIEE Conference
• /
• 2007.11c
• /
• pp.108-111
• /
• 2007

A novel voltage sag compensator with hi-directional DC/DC converter of Electric double layer capacitor is proposed. Recently, the double-layer capacitor which is drawn attention as a new energy storage element has a lot of advantage such as no maintenance, long lifetime and quick charge/discharge characteristics with large current. This DC/DC converter is used to control the charging current to the double-layer capacitor and also used to keep the DC link voltage constant for discharge of the double-layer capacitor. Therefore, the proposed DC/DC converter has the high-efficiency controller, dynamic compensator of voltage sag is driven by this converter. Finally, experimental results show the validity of the control scheme and the ability of the dynamic voltage compensator.

• Journal of the Korean Ceramic Society
• /
• v.22 no.5
• /
• pp.29-34
• /
• 1985

The PTCR characteristics of the $BaTiO_3$ as a function of the molten KCl and dopant $Sb_2O_3$ were investitated. When the weight ratio of KCl to raw materials was above 0.1, $BaTiO_3$ was synthesized by calcining at 80$0^{\circ}C$ for 6 hrs. As the amount of the KCl increased the resistivity of the $BaTiO_3$ at room temperature incr-eased. This can be explained by charge compensation effect between electrons and holes and with microstruc-tures change of the specimens. The resistivity of the $BaTiO_3$ decreased with increasing amount of $Sb_2O_3$. In the time-current characteristics initial current decreased with increasing the ratio of KCl to raw materials but initial current increased and then decreased with the increase of the dopant $Sb_2O_3$. These results of the time-current characteristics can be explained by the resistivity-temperature characteristics.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.819-821
• /
• 2002

Photoluminescenc (PL) and low-voltage cathodoluminescence (CL) characteristics of $[xSrTiO_3+(1-x)Li_2TiO_3]:Pr^{3+}$ and $[xSrTiO_3+(1-x)Na_2TiO_3]:Pr^{3+}$ systems were investigated. The red luminescence intensities of these compounds are enhanced remarkably by the incorporation of $Li^+$ or $Na^+$ ion as compared to that of $SrTiO_3:Pr^{3+}$. The enhanced luminescence is speculated to result from both the charge compensation of $Pr^{3+}$ site and oxygen vacancies generated in the lattices by $Li^+$ or $Na^+$ ion.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.550-553
• /
• 2002

A source meter is a basic instrument to perform a measurement of DC characteristic of semiconductor devices. the source meter can be used as variable voltage source, variable current source, voltage meter, or current meter. The accuracy of the low current measurement can be improved with the compensation of leakage current and charge and discharge current. In the low current measurement, the RC time constant is extremely big, so the measurement speed is very low. In this thesis, the analysis of the behavior of the measurement current according to the RC time constant and output capacitance and the method to accelerate the measurement speed.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.3
• /
• pp.151-169
• /
• 2000

Product Liability(P.L) is designed for system which charge with a compensation for demages that has nothing to do with whether manufacturer make a mistake or not in that case suffer heavy losses anyone of body or property by defect of product. Now and then, most people interest of safety of product and main countries already carry out Product Liability. This paper analyzes newly studied cases by defects, products, countries in Korea and some developed countries (USA and Japan mainly) in order to prepare for Product Liability, which will be enforced on July 1, 2002 in Korea. Before P.L. began to enforce, many cases have happened and resulted in sues. Therfore, each country have revised the current P.L. after many trials and errors. From this respect, the cases of other countries and Korea will be compared and analyzed.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.3
• /
• pp.420-431
• /
• 1994

The HgCdTe material, which is II-VI compound semiconductor, is important materials for the fabrication of the infrared detectros. To suggest the model of accurate MIS C-V calculation for narrow band gap semiconductors such as HgCdTe, non-parabolicity from k.p theory and degeneracy effect are considered. And partially ionized effect and compensation effect which are material's properties are also considerd. Especially, degenerated material C-V characteristics from Fermi-Dirac statistics and exact charge theory are presented to get more accurate analysis of the experimental results. Also the comparison with calculation results between the general MIS theory from Boltzmann appoximation method and this model which is considered the narrow band gap semiconductor properties, show that this model is more useful theory to determination of accurate low and high frequency C-V characteristics.

• Korean Journal of Materials Research
• /
• v.14 no.2
• /
• pp.115-120
• /
• 2004

Perovskite barium-strontium titanate, $(Ba, Sr)TiO_3$ was prepared and effects of $Sb_2$O$_3$ additives on its PTCR properties were investigated. $The (Ba,Sr)TiO_3$ with 0.05～0.25 mol% $Sb_2$$O_3$ showed semiconducting PTCR behavior and anomalous grain growth was also observed when it was sintered above $1330^{\circ}C$. It was considered that charge compensation by doping 8b203 as well as abnormal grain growth by sintering lead to resistivity reduction from insulating to semiconducting transition.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.10
• /
• pp.102-110
• /
• 2012

This paper propose the advanced topology of UPQC, its DC link is connected with Lithium battery, to compensate the momentary interruptions. The proposed system can be operated as UPS mode using the parallel inverter, which control the charge or discharge of battery, in case of the interruption. We dvelop 100kVA UPQC using the proposed topology to rise the power quality and the reliability of Microgrid. We verify its usefulness through voltage compensation test, UPS operation test and etc. using Microgrid test facility.

• Journal of Trauma and Injury
• /
• v.25 no.4
• /
• pp.178-187
• /
• 2012

Purpose: In Korea, the nation's medical expenses were 12 billion won in 2010. The medical costs for individuals can also be overwhelming. If a patient has sustained severe trauma, his/her insurance company responsible may pay only part of the medical bills. In Korean, there are diverse types of medical insurance, such as health insurance, automobile insurance, and industrial accident compensation insurance. And each insurance system has a different type of payment system. Our study will be essential for establishing the optimal medical expense payment system. Methods: From January to December 2011, we retrospectively reviewed the medical charts of 161 patients who were admitted to our hospital's emergency room after having undergone severe trauma. Of those 161 patients, 125 were retrospectively reviewed. Written permission was obtained from all of the patients. We analysed the demographic characteristics, clinical outcomes, data of the trauma, type of the patient's insurance, and the entire bill when the patient was discharged. Results: Seventy-one patients had health insurance, 48 automobile insurance, and six industrial accident compensation insurance. High-deductible insurance included health insurance and industrial accident compensation insurance, with the deductibles up to 20.6% and 19.1%, respectively. We attempted to analyze the cause of the high deductible rate. In patients with health insurance, medicines, primarily sedatives, pain killers, antibiotics, and fluids. comprised a large proportion. On the other hand, industrial accident compensation insurance deducted for a high-grade hospital room charge. Conclusion: We found that medical expenses were diverse according to the type of insurance. In particular, health insurance forced patients to pay too much of the medical expenses. Therefore, in Korea we should try to identify the insurance problems and improve the wage system.