• Journal of the Korea Society for Simulation
• /
• v.31 no.3
• /
• pp.11-21
• /
• 2022

Two methods for analyzing interaction between shaped charge jets and targets are taken in AVEAM-MT (ADD Vulnerability and Effectiveness Assessment Model for Materiel Target), which is a model for vulnerability analysis of materiel targets and being developed by ADD. One is an empirical method improved from the Fireman-Pugh technique for rapid penetration calculation into target components. The other is ADD-TSC(ADD Tandem Shaped Charge), which is a physics-based model extended to be applicable for shaped charge jets from the Walker-Anderson penetration model for higher fidelity analysis. In this paper, the two methods are briefly described, and the empirical technique is compared to the physics-based model in the prediction of residual penetration capacity. The latter is also compared to experimental results found in literature in predicting penetration capacity. These comparisons show that both methods can be used for fast calculations or higher fidelity calculations in vulnerability analysis models like AVEAM-MT which is required to perform a considerable amount of iterative simulation for damage analysis.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.1
• /
• pp.129-145
• /
• 2017

This study proposes a methodology to estimate the financial damages by personal information breach of a company and to analyse risk systematically through a case study of a company which experiences private information breach. Using FAIR(Factor Analysis of Information Risk) model, estimate the loss amount and to analyse risk objectively of a company by personal information breach. This study estimates adequacy and importance of corresponding factors applying AHP(Analytic Hierarchy Process) on each factors for assessing loss amount. By adopting proposed methodology in this study, the person in charge of actual work can assess and prove the loss amount though the latest risk estimation methodology. In addition, the person in charge can select the proper parameters for the corresponding company and can obtain the objective quantitative estimation. Hence it can be reported to the management by accurately assessing loss amount caused by personal information breach.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.3
• /
• pp.178-185
• /
• 2006

This paper investigates the steady-state combustion characteristics of the Homogeneous charge compression ignition(HCCI) engine with variable valve timing(VVT) and dimethyl ether(DME) direct injection, to find out its benefits in exhaust gas emissions. HCCI combustion is an attractive way to lower carbon dioxide($CO_2$), nitrogen oxides(NOx) emission and to allow higher fuel conversion efficiency. However, HCCI engine has inherent problem of narrow operating range at high load due to high in-cylinder peak pressure and consequent noise. To overcome this problem, the control of combustion start and heat release rate is required. It is difficult to control the start of combustion because HCCI combustion phase is closely linked to chemical reaction during a compression stroke. The combination of VVT and DME direct injection was chosen as the most promising strategy to control the HCCI combustion phase in this study. Regular gasoline was injected at intake port as main fuel, while small amount of DME was also injected directly into the cylinder as an ignition promoter for the control of ignition timing. Different intake valve timings were tested for combustion phase control. Regular gasoline was tested for HCCI operation and emission characteristics with various engine conditions. With HCCI operation, ignition delay and rapid burning angle were successfully controlled by the amount of internal EGR that was determined with VVT. For best IMEP and low HC emission, DME should be injected during early compression stroke. IMEP was mainly affected by the DME injection timing, and quantities of fuel DME and gasoline. HC emission was mainly affected by both the amount of gasoline and the DME injection timing. NOx emission was lower than conventional SI engine at gasoline lean region. However, NOx emission was similar to that in the conventional SI engine at gasoline rich region. CO emission was affected by the amount of gasoline and DME.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.427-432
• /
• 2005

This study developed a program for detecting charged refrigerant amount in system air-conditioner. System air-conditioner is an air-conditioning system with multiple indoor units. Due to the complexity of the system, it is more difficult to detect the refrigerant amount charged in system air-conditioner than in a general single air-conditioner. Experiments were performed for 6 HP outdoor units with 3 indoor units in a psychrometric calorimeter. The experimental amount of charged refrigerant were ranged from 60% to 140% with 10% increasement. Fuzzy algorithm were emploeed for detecting the charged refrigerant amount in a system air-conditioner. The experimental data were used for curve fitting for general ranges for indoor and outdoor temperature conditions. membership function were determined for whole ranges of experimentally measured data and rulebase were defined for each amount of refrigerant charge. Developed program successfully predicted the measured data within 10% resolution range.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.510-515
• /
• 2012

The objective of this study is to investigate low temperature performance characteristics of the thermosyphon with/without wick. Thermosyphons using water as the working fluid are tested with variations of wick, charge amount of the working fluid, outdoor temperature, and heat load for the evaporator section at a low temperature. As a result, the heat transfer of thermosyphon was optimized at the charge amount of 40% and increased with the rise of the outdoor temperatures.

• Journal of Internet Computing and Services
• /
• v.9 no.3
• /
• pp.119-128
• /
• 2008

To use commercial software, most software users purchase the software. Some software users, who do not use the software frequently, regard purchasing the software as undue expense. Software rental service can be an effective substitute. To support the software rental service, charging scheme is necessary. Two categories of charging scheme can be considered. One is charging a fixed amount of fee for a fixed period of time and the other is charging a fee based on the actual usage time. In this paper, the software pay-per-use approach based on the amount of time that the software user has used is proposed. The proposed approach gives the capability to calculate the usage time.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.6
• /
• pp.520-525
• /
• 2000

Glucose oxidase was immobilized in polypyrrole by electrosynthesis. The enzyme had an influence on the redox properties of a complex enzyme electrode. In the cyclic voltammograms of the enazyme electrode new peaks were appeared at the potential around 0.7V vs. Ag/AgCl in additional to the typical peaks for polypyrrole. The more immobilized the stronger the peaks became. During the cycling the pH of electrolyte solution was decreased to about 4.4 The reason for that is to be the proton released from the carboxyl in the glucose oxidase in order to keep on a charge neutrality of the oxidized enzyme. This fact suggests that the new peaks in the voltammograms are caused by the redox of glucose oxidase. In the AC impedance spectrum analysis of the electrode the diffusion of electrolyte anion was limited because of chained structure of the enzyme. The faradic impedance was large since the glucose oxidase is an insulator. Therefore when glucose oxidase is entrapped the enzyme should be limited in amount. Because the growth of the polypyrrole is accompanied both charge transfer and mass transport. For the traditional electrosynthesis that means amount of enzyme present in the electrode is limited to as much as film growable.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.5
• /
• pp.613-627
• /
• 2015

Simple methods of conductometric titration and infrared spectroscopy were used to quantify the surface carboxyl content of cellulose fibrils isolated by 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-mediated oxidation. The effects of different cellulose sources, post or assisted-sonication oxidation treatment, and the amount of sodium hypochlorite addition on the carboxyl content of cellulose were reported. This study showed that post sonication treatment had no influence on the improvement of surface carboxyl charge of cellulose macrofibrils (CMFs). However, the carboxyl content increased for the isolated cellulose nanofibrils (CNFs). Thus the carboxyl content of CNFs is different from those of their corresponding bulk oxidized cellulose and CMFs. Filter paper as a CNF source imparted a higher surface charge than did hardwood bleached kraft pulp (HWBKP) and microcrystalline cellulose (MCC). It was considered that the crystallinity and microstructure of the initial cellulose affected oxidation efficiency. In addition, the carboxyl content of cellulose was successfully controlled by applying sonication treatment during the oxidation reaction and adjusting the amount of sodium hypochlorite.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.2
• /
• pp.42-52
• /
• 2015

In this study, cellulose nanofibrils (CNF) were modified through carboxymethylation or TEMPO-mediated oxidation and their effects on ionicity and characteristics of sheet, film, and foam were investigated. Carboxymethylation was carried out on pulp fibers as a pre-treatment before preparation of CNF. The gel-like and translucent CNF hydrogel was obtained by grinding of carboxymethylated cellulose fibers. Carboxymethylated CNF film and freeze dried sheet showed higher transparency than that of untreated CNF. The CNF sheet with high strength and the CNF foam without large ice crystals were obtained by using the carboxymethylated CNF. TEMPO-mediated oxidation was carried out as a post-treatment of CNF. The zeta potential and charge demand of TEMPO-oxidized CNF were increased with an increase in oxidation time and addition amount of NaClO. The density of sheet made of TEMPO oxidized CNF was increased with the amount of oxidizing agent. The TEMPO oxidized cellulose nanofiber (TOCN) which was obtained from supernatant after centrifugation could be converted to transparent film.

• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.552-559
• /
• 2020

Activated carbon-nickel (II) oxide (AC-NiO) electrodes were studied as materials for the capacitive deionization (CDI) of aqueous sodium chloride solution. AC-NiO electrodes were fabricated through physical mixing and low-temperature heating of precursor materials. The amount of NiO in the electrodes was varied and its effect on the deionization performance was investigated using a single-pass mode CDI setup. The pure activated carbon electrode showed the highest specific surface area among the electrodes. However, the AC-NiO electrode with approximately 10 and 20% of NiO displayed better deionization performance. The addition of a dielectric material like NiO to the carbon material resulted in the enhancement of the electric field, which eventually led to an improved deionization performance. Among all as-prepared electrodes, the AC-NiO electrode with approximately 10% of NiO gave the highest salt adsorption capacity and charge efficiency, which are equal to 7.46 mg/g and 90.1%, respectively. This finding can be attributed to the optimum enhancement of the physical and chemical characteristics of the electrode brought by the addition of the appropriate amount of NiO.