• Journal of Navigation and Port Research
• /
• v.34 no.4
• /
• pp.265-270
• /
• 2010

The national VTS was launched in 1993, and has adopted a harbour-oriented control method which is unable to consider enough characteristics of its work. However, for the past 17 years, the characteristics has changed due to increased amount of vessels. Up to now the domestic Vessel Traffic Service has adopted harbour-oriented control method which is unable to consider enough characteristics of its work. However, developed countries have carried out waters-oriented control method, according to the using areas of ships, to be well considered the characteristics of control for increasing efficiency of it. Especially, VTS of Daesan, Pyeongtaek and Inchon harbour can have confusions of control because of overlapped service areas of it. Therefore, in this paper suggested a new Sector Division that the relevants waters is divided into 3 operational Regions and these are divided into nine sectors again, for the purpose of improving the efficiency and the concentration of VTS.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.11a
• /
• pp.63-66
• /
• 1992

Using an aromatic system, we made a ultra thin insulator through LB-method. We measured and wrote down afternating currant characteristics of ultraviolet rays extincting-spectrum and I.R extincting-spectrum. We surveyed the thickness of a film through X-ray diffracting method and certified about $4{\AA}$ by the layer. Measuring the characteristics of direct current voltage and electric current with this sample, we produced its conductivity and discovered that this sample had a god insulating performance. Addition to this, we measured the characteristics of voltage and electric current, and the temperature dependency of conductivity in a high voltage system and with these results tried to interpret a mechanism of conduction.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.9
• /
• pp.847-854
• /
• 2014

The paper presented a method of early fire detection based on the environmental characteristics inside the nacelle of wind turbine generator system(WTGS). The rising rates of the temperature and smoke density were used as the parameters for early fire detection. By considering the characteristics of temperature and smoke density of a nacelle, this method is very reliable and can minimize the possibility of a malfunction of fire detection. The performance of the method was tested through sets of experiments by using nacelle simulator.

• Journal of KSNVE
• /
• v.4 no.2
• /
• pp.155-161
• /
• 1994

The dynamic behavior of a complex mechanical structure can be identified by dividing the structure into a series of smaller structure, called sub- structure and by studying the dynamic characteristics of these components. Generally, the dynamic characteristics of mechanical structure are strongly affected by the properties of joint parameters. In this paper, to identify the dynamic characteristics of mechanical structure, and experimental identification method in which directrly measured frequency response function(FRF) is used is considered. The method does not use the procedure of complex matrix calculation but use that of real matrix calculation. To confirm this method, computer simulation is performed by using frequency response function mixed with noise, and the experimental study is performed about the simple structure. The dynamic characteristics of joint parameters and identified more accurately than in using the prcedure of complex matrix calculation.

• Journal of the Korean Institute of Navigation
• /
• v.16 no.4
• /
• pp.25-34
• /
• 1992

As a method of measure the absorbing characteristics of microwave absorber, the various microwave measuring method can be used fundamentally. There is, however, a big problem in measuring errors, since the wavelength of microwave such as used for radar is very short. Therefore, this research aimed to design and fabricate a converting adaptor of $20mm^{\phi}$ coaxial tube from a Type-N connector to $20mm^{\phi}$ coaxial tube and to use it for evaluating absorption characteristics of microwave absorber. Furthermore, the measurements of absorbing characteristics and material constants have been performed and review, which were carried out by using the coaxial tube and by using rectangular waveguide, respective. As a result, the validity of the proposed measuring method has been confirmed.

• Advances in concrete construction
• /
• v.11 no.5
• /
• pp.397-407
• /
• 2021

This paper investigates the optimal sensor placements and capabilities of this procedure for dynamic characteristics identification of arch dams. For this purpose, a prototype arch dam is constructed in laboratory conditions. Berke arch dam located on the Ceyhan River in city of Osmaniye is one of the highest arch dam constructed in Turkey is selected for field verification. The ambient vibration tests are conducted using initial candidate sensor locations at the beginning of the study. Enhanced Frequency Domain Decomposition and Stochastic Subspace Identification methods are used to extract experimental dynamic characteristics. Then, measurements are repeated according to optimal sensor locations of the dams. These locations are specified using the Effective Independence Method. To determine the optimal sensor locations, the target mode shape matrices which are obtained from ambient vibration tests of the selected dam with a large number of accelerometers are used. The dynamic characteristics obtained from each ambient vibrations tests are compared with each other. It is concluded that the dynamic characteristics obtained from initial measurements and those obtained from a limited number of sensors are compatible with each other. This situation indicates that optimal sensor placements determined by the Effective Independence Method are useful for dynamic characteristics identification of arch dams.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.266-269
• /
• 1999

An electronically Scannable microphone system is in the Planning stage. For this Purpose, a multiple microphone array with controllable delay is available. To achieve effective point-listening characteristics, we proposed an enclosed microphone array system with a complex weighting method. In this system, both the microphone arrangement and the value of the complex weighting are important. In this report, the construction of microphone array system and the signal-processing method are explained, and the calculation method for optimal complex weighting is also presented. A prototype experimental setup is designed and fabricated to verify the expected characteristics.

• Journal of Information Display
• /
• v.10 no.2
• /
• pp.80-86
• /
• 2009

The variation of the electrical characteristics of thin-film transistors (TFTs) causes a non-uniform image quality problem, and the differential aging of organic light-emitting diode (OLED) devices causes an image-sticking problem. A video data correction method is proposed herein as an effective solution to the non-uniform electro-optical characteristics of the pixels in activematrix organic light-emitting diode (AMOLED) displays. The results of the simulation that was conducted show that the proposed method successfully senses the electrical characteristics of TFTs and the degradation of OLEDs and effectively compensates for them.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.6
• /
• pp.123-133
• /
• 1995

An injection control valve(ICV) was designed to control the fuel flow between a common rail and an injector with two commercial solenoids. To improve the performance of ICV, the characteristic method was applied. With this method, the flow characteristics in the ICV and the injector were studied and the parameters which affect the injection characteristics were also studied. From this study, following results were obtained. The injection duration can be controlled and with modifications of the effective valve stroke of ICV, the injection quantity and duration can be reduced to desired amount. Also the injection quantity and pressure can be controlled by reducing the hole size of the injector without the variation of the injection duration. For some conditions, the desired injection characteristics can be obtained by the changes of the valve timing, the effective valve stroke, the open pressure of the injector and the hole size of the injector.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.6
• /
• pp.276-280
• /
• 2001

This paper presents the result of a study on the distribution characteristics of salt contaminants in the west coast region, from Inchon to Yearsoo, of South Korea. To evaluate the distribution characteristics of salt contaminants, we had measured the equivalent salt deposit density(ESDD) with brush wiping method for thirteen month(from May 1999 to June 2000). Under the consideration on the measuring interval and method, normalization method was applied for the ESDD data. Besides the measurement, the chemical analysis (chromatography) was carried to investigate the relationship, between the electrical property and the amount of specific ingredient, such as sodium, magnesium and chloride. From the result, we could get the representative value of contamination for each site and distribution characteristics of salt contaminants with the distance from sea in the west coast.