• Journal of Wetlands Research
• /
• v.15 no.1
• /
• pp.25-34
• /
• 2013

The purpose of this study is to investigate the properties of Menyanthes trifoliata habitat in coastal lagoons. To characterize plant composition in the habitats in the lagoon, the plot sampling method was applied. The depths of water and floating mat were measured. Surface water quality factors including pH, electrical conductivity (EC), dissolved oxygen (DO), and total dissolved solids (TDS) were measured in the sites. Phosphate, nitrate, ammonium, and major cations were measured in laboratory. The wetland has 78 taxa of wetland plants. The average coverage and density of M. trifoliata was 62.6% and $71.2/m^2$, respectively and Phragmites australis is important associate in Sunyoodam lagoon. The average depths of floating mats were 26.5cm in M. trifoliata and 68.9cm in the P. australis-M. trifoliata communities, and the water depth below the mat was 106.5cm and 17.7cm, respectively. The values of pH, DO, EC and TDS in the water were 5.06, 46.1%, 59.4 ${\mu}s/cm$, and 29.3 mg/L, respectively. The concentrations of phosphate, nitrate, and ammonium showed 47.2, 9321, and 15.9 ${\mu}g/L$, respectively. The concentrations of Ca, K, Na, and Mg had 11.1, 1.5, 15.1, and 11.3 mg/L, respectively. The habitats of M. trifoliata in the lagoon corresponds to a kind of lowland communities in Hewett's classification. To conserve the habitats of M. trifoliata in Sunyoodam lagoon, the supply of open water area, the construction of observation deck, and the block of inflow from the surrounding paddy fields are needed in the future.

• Journal of Wetlands Research
• /
• v.23 no.4
• /
• pp.287-295
• /
• 2021

As facilities such as dam reservoir wetlands and agricultural irrigation reservoir wetlands are built, sedimentation occurs over time through erosion, sedimentation transport, and sediment deposition. Sedimentation issues are very important for the maintenance of reservoir wetlands because long-term sedimentation of sediments affects flood and drought control functions. However, research on resignation has been estimated mainly by empirical formulas due to the lack of available data. The purpose of this study was to calculate and compare the sediment deposition rate by developing a multiple regression model along with actual data and empirical formulas. In addition, it was attempted to identify potential causes of collapse by applying it to 64 reservoir wetlands that suffered flood damage due to the long rainy season in 2020 due to reservoir wetland sedimentation and aging. For the target reservoir, 10 locations including the GaGog reservoir located in Miryang city, Gyeongsangnam province in South Korea, where there is actual survey information, were selected. A multiple regression model was developed in consideration of physical and climatic characteristics, and a total of four empirical formulas and sediment deposition rate were calculated. Using this, the error of the sediment deposition rate was compared. As a result of calculating the sediment deposition rate using the multiple regression model, the error was the lowest from 0.21(m³km²/yr) to 2.13(m³km²/yr). Therefore, based on the sediment deposition rate estimated by the multi-regression model, the change in the available capacity of reservoir wetlands was analyzed, and the effective storage capacity was found to have decreased from 0.21(%) to 16.56(%). In addition, the sediment deposition rate of the reservoir where the overflow damage occurred was relatively higher than that of the reservoir where the piping damage occurred. In other words, accumulating sediment deposition rate at the bottom of the reservoir would result in a lack of acceptable effective water capacity and reduced reservoir flood and drought control capabilities, resulting in reservoir collapse damage.

• Economic and Environmental Geology
• /
• v.56 no.4
• /
• pp.435-445
• /
• 2023

A delta is a depositional landform that is formed when sediment transported by a river is deposited in a relatively low-energy environment, such as a lake, sea, or a main channel. Among these, a delta formed at the confluence of rivers has a great importance in river management and research because it has a significant impact on the hydraulic and sedimentological characteristics of the river. Recently, the equilibrium state of the confluence area has been disrupted by large-scale dredging and construction of levees in the Nakdong River. However, due to the natural recovery of the river, the confluence area is returning to its pre-dredging natural state through ongoing sedimentation. The time-series data show that the confluence delta has been steadily growing since the dredging, but once it reaches a certain size, it repeats growth and retreat, and the overall size does not change significantly. In this study, we developed a model to explain the sedimentation-erosion processes in the confluence area based on the assumption that the confluence delta reaches a dynamic equilibrium. The model is based on two fundamental principles: sedimentation due to supply from the tributary and erosion due to the main channel. The erosion coefficient that represents the Nakdong River confluence areas, was obtained using data from the tributaries of the Nakdong River. Sensitivity analyses were conducted using the developed model to understand how the confluence delta responds to changes in the sediment and water discharges of the tributary and the main channel, respectively. We then used annual average discharge of the Nakdong River's tributaries to predict the dynamic equilibrium positions of the confluence deltas. Finally, we conducted a simulation experiment on the development of the Gamcheon-Nakdong River delta using recorded daily discharge. The results showed that even though it is a simple model, it accurately predicted the dynamic equilibrium positions of the confluence deltas in the Nakdong River, including the areas where the delta had not formed, and those where the delta had already formed and predicted the trend of the response of the Gamcheon-Nakdong River delta. However, the actual retreat in the Gamcheon-Nakdong River delta was not captured fully due to errors and limitations in the simplification process. The insights through this study provide basic information on the sediment supply of the Nakdong River through the confluence areas, which can be implemented as a basic model for river maintenance and management.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.580-587
• /
• 2017

Woodfiber insulation board can be considered as a one of the key material for low energy consumption, comfortable and safety construction of residential space because of its eco-friendly and high thermal insulation performance. This study was carried out to investigate the formaldehyde (HCHO) total volatile organic compounds (TVOC) emission properties and combustion shapes by flame test of low density fiberboards (LDFs) prepared with different adhesives. HCHO TVOC emission and combustion properties of LDFs prepared by melamine urea formaldehyde (MUF), phenol formaldehyde (PF), emulsified methylene diphenyl diisocyanate (eMDI) and latex resin adhesives were measured by desiccator method, 20 L chamber method, and flame test, respectively. As results, LDFs manufactured by MUF, eMDI and latex resin adhesives satisfied the Super $E_0$ grade of HCHO emission performance except PF resin. Furthermore, TVOC emission of all LDFs were satisfied the Korean indoor air quality standard (below $400{\mu}g/m^2{\cdot}h$). Especially, LDF with eMDI resin adhesive showed the lowest HCHO and TVOC emissivity, that $0.14mg/{\ell}$, $12{\mu}g/m^2{\cdot}h$, respectively. However, eMDI emitted the small amount ($3{\mu}g/m^2{\cdot}h$) of toluene in VOC components. In the flame test, LDF with MUF resin adhesives showed the most favorable shape after flame test compare to LDFs prepared other adhesives. Based on HCHO and TVOC emission, and combustion shapes, MUF resin adhesive may be recommended to prepare LDF for insulation purpose.

• Korean Journal of Social Welfare
• /
• v.53
• /
• pp.285-310
• /
• 2003

As National Pension Scheme for all nation complete in 1999 through expanding application in cities, the public pension including Public Occupational Pension became main axis of old-age income maintenance. After 4years since then, now, it is only half of total National Pension insured persons who have been qualified to receive pension through participate and contribution. The other half of National Pension insured is left the excluded from public pension. This paper is intended to identify scale and characteristics of the excluded from public pension and to analysis its cause, and to explore policy measures for solving the excluded's problem. for current recipients over 60 years old generation, the its excluded's scale is no less than 86% of the old over 60 years. The probability of getting in the excluded is high in case of old elderly and female for current elderly generation. For future recipients 18-59 years working generation, the its excluded's scale is no less than 61% of the 18-59 years total population. The probability of getting in the excluded is high in case of 18-29 years and female for current working generation. As logistic regression analysis determinant factor of paying or not pension contribution for future recipients, it appear that probability of getting in the excluded for current working generation is high in case of younger old, lower education attainment, irregular employee, working at agriculture forestry fishery sector, construction sector, wholesale retail trade restaurants hotels sector, financial institution and insurance real estate renting and leasing sector in comparison with manufacturing sector, occpaying at elementary occupation, professionals technicians and associate professionals, sale and service workers, plant machine operators and assemblers, legislators senior officials and managers in comparison with clerks. The Policy measures for the current recipient old generation have need to reinforce supplemental role of Senior's pension(non-contribution pension) until maturing of public pension, because of no having chance of public pension participants for them. And the Policy measures for the future recipient working generation have need to restructure social security fundamentally corresponding with social-economic change as labour market and family structure etc. The pension system has need to change from one earner one pension to one citizen one pension with citizenship rights. At this point, public pension have need to manage with combining insurance's contribution principle and citizenship principle financing by taxes. Then public pension will become substantially universal social network for old-age income maintenance and we can find real solution for the excluded from.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.305-313
• /
• 2020

The use of cable tunnels for electric power transmission as well as their construction in difficult conditions such as in subsea terrains and large overburden areas has increased. So, in order to efficiently operate the small diameter shield TBM (Tunnel Boring Machine), the estimation of advance rate and development of a design model is necessary. However, due to limited scope of survey and face mapping, it is very difficult to match the rock mass characteristics and TBM operational data in order to achieve their mutual relationships and to develop an advance rate model. Also, the working mechanism of previously utilized linear cutting machine is slightly different than the real excavation mechanism owing to the penetration of a number of disc cutters taking place at the same time in the rock mass in conjunction with rotation of the cutterhead. So, in order to suggest the advance rate and machine design models for small diameter TBMs, an EPB (Earth Pressure Balance) shield TBM having 3.54 m diameter cutterhead was manufactured and 19 cases of full-scale tunneling tests were performed each in 87.5 ㎥ volume of artificial rock mass. The relationships between advance rate and machine data were effectively analyzed by performing the tests in homogeneous rock mass with 70 MPa uniaxial compressive strength according to the TBM operational parameters such as thrust force and RPM of cutterhead. The utilization of the recorded penetration depth and torque values in the development of models is more accurate and realistic since they were derived through real excavation mechanism. The relationships between normal force on single disc cutter and penetration depth as well as between normal force and rolling force were suggested in this study. The prediction of advance rate and design of TBM can be performed in rock mass having 70 MPa strength using these relationships. An effort was made to improve the application of the developed model by applying the FPI (Field Penetration Index) concept which can overcome the limitation of 100% RQD (Rock Quality Designation) in artificial rock mass.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.10
• /
• pp.61-74
• /
• 2022

Considering that the number of cases in which a structure foundation is located on weathered rock has been increasing recently, for adequate design bearing capacity of a foundation on weathered rock, allowable bearing capacities of such foundations in geotechnical investigation reports were studied. With reference to the study results, the allowable bearing capacity of a foundation on weathered rock was approximately 400-700 kN/m², with a large variation, and was considered a conservative value. Because the allowable bearing capacity of the foundation ground is an important index in determining the foundation type in the early design stage, it can have a significant influence on the construction cost and period according to the initial decision. Thus, in this study, six large-scale plate-bearing tests were conducted on weathered rock, and the bearing capacity and settlement characteristics were analyzed. According to the test results, the bearing capacities from the six tests exceeded 1,500 kN/m², and it shows that the results are similar with the one of bearing capacity formula by Pressuremeter tests when compared with the various bearing capacity formula. In addition, the elastic modulus determined by the inverse calculation of the load-settlement behavior from the large-scale plate-bearing tests was appropriate for applying the elastic modulus of the Pressuremeter tests. With consideration of the large-scale plate-bearing tests in this study and other results of plate-bearing tests on weathered rock in Korea, the allowable bearing capacity of weathered rock is evaluated to be over 1,000 kN/m². However, because the settlement of the foundation increases as the foundation size increases, the allowable bearing capacity should be restrained by the allowable settlement criteria of an upper structure. Therefore, in this study, the anticipated foundation settlements along the foundation size and the thickness of weathered rocks have been evaluated by numerical analysis, and the foundation size and ground conditions, with an allowable bearing capacity of over 1,000 kN/m², have been proposed as a table. These findings are considered useful in determining the foundation type in the early foundation design.

• Korean Journal of Environment and Ecology
• /
• v.36 no.6
• /
• pp.676-683
• /
• 2022

Due to the effects of rapid changes in the living environment since 2000 and the recent unforeseen pandemic, people are refraining from domestic and international traveling and movement, and outdoor activities for health and the public value of forest trails, called Dullegil Trail in Korea, have become more important. This study estimated the environmental value of the tentatively named "East-West Trail," which connects the forest trails crossing Chungcheong and Gyeongsang Provinces using CVM (Contingent Valuation Method). It surveyed visitors to the East-West Trail, and 725 questionnaires were used for analysis. The average characteristics of respondents were those who exercised 2-3 times per week, visited a forest trail not far from their residence with friends or family, and showed a tendency to spend 50 thousand Korean won or more per visit. Visitors to the Dullegil Trail felt that there was a shortage of information boards on the forest trail, and they preferred a shelter in appropriate locations. We used a double-bounded dichotomous choice (BDDC) logit model proposed by Hanemann to measure the conservation value of the East-West Trail. It was estimated that the environmental value that a visitor to the East-West Trail could obtain was 30,087 won per trip. The estimated environmental value of the East-West Trail can be converted to about 94 billion won total visitors annually based on the population belonging to the direct-use zone near the East-West Trail. As there has been no study on the environmental value of forest trails using CVM, the results of this study will be able to suggest the feasibility of the government policies on forest trails.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.3
• /
• pp.6-22
• /
• 2024

This paper examines the characteristics of wooden wells from the Three Kingdoms period that were discovered in the Yeongsan River basin, in addition to their functions based on the distribution of the remains and excavated artifacts found near the wells. A total of 11 wooden wells have been found at six archeological sites along the middle and upper reaches of the Yeongsan River basin. These wooden wells were built in a wider variety of forms than wells made of other materials due to the ease of processing resulting from the physical properties of wood. However, due to the limited geological conditions in which these wells can be installed and their rapid decay, the discovery of such wells is rare. They tend to be located in the clay and mud layers of old river channels or near river channels where it was relatively easy to obtain water from the riverbed. The wooden wells are mostly square or rectangular in shape and were assembled transversely, and some include support beams in their construction. The backfill was reinforced with either stone, a mixture of stone and clay, or a mixture of clay and pottery shards. The material mainly used was pine wood boards, with wood from chestnut trees being used as a sub-material. Various artifacts, such as pottery and wooden containers, animal bones, and seeds, have been excavated in small quantities. The excavated pottery items consist mostly of flat cups with a cover, mounted cups, pottery stands, wide-mouthed jars with a hole, and round pottery. Based on the environment and remains of the sites, the wells are thought to have been used for domestic and production purposes. The assumed primary function was to obtain domestic water, as most of the wells were located within residential spaces where the area's inhabitants lived. The wells were also used to obtain water for agricultural purposes, as well as for productive purposes such as for operating kilns and smelters. Lastly, the wooden wells were also found to be strongly associated with rites, as evidenced by the artifacts found inside them.

• Journal of Preventive Medicine and Public Health
• /
• v.10 no.1
• /
• pp.166-175
• /
• 1977

The author have performed an epidemiological study on the accidental deaths at industry from 1970 to 1975, in order to seek for the preventive measures of industrial accident with the under-standing of its cause and characteristics of the accidental deaths. The obtained results were as follows; 1. Total number of deaths for 6 years were 361 (350 males, 11 females). and the mean death rate was 33.8 per 100,000 industrial workers during 6 years. By the highest as 52.9 was in 1974 and the lowest as 13.7 in 1970. By the industry group, the death rate of Electricity, Gas and Water was 149.3, Construction 83.9 and the lowest was Manufacturing as 18.3. 2. Standardized mortality rate of the cases by the age group showed that 20-29 years old group was 43.0, 40-49 years old group 38.1, 30-39 years old group 32.0, and the lowest as 17.9 was under 19 years old group. 3. The cumulative percentage of the cases by years of service showed that under 6 months was 60.4%, under 1 year 72.9%, under 2 years 83.1%. 4. By the month of occurrence, the highest was 15.8% which occurred in August and the lowest was 5.8% in February. The highest as 19.1% was on Friday and the lowest as 11.9% on Monday by the day of a week. 5. By the causes of accident, car accidents was 28.3%, fall accidents 19.1%, accidents by a crash 9.1% in that order. By the location of injury, head was 44.6%, multiple injuries 33.0%, chest 10.5%, and back was the lowest as 1.9%. The distribution of the cases by nature of injury shelved that cerebral contusion and hemorrhage was 39.4%, fracture and dislocation 33.2%, asphyxia 8.0% in that order. 6. The cumulative percentage of the cases by the duration from injury to death showed that the injuried day was 74.2%, within 3 days after injury 88.5%, within 7 days 96.1%. Therefore most of the cases were occurred within 7 days after injury. 7. Byythe daily mean wages, most of the cases as 91.7% were under 2,000 won, and more 4,000 won was 1.6% merely.