• ETRI Journal
• /
• 제28권3호
• /
• pp.347-354
• /
• 2006

The characteristic variation of 3-dimensional (3-D) solenoid-type embedded inductors is investigated. Four different structures of a 3-D inductor are fabricated by using a low-temperature co-fired ceramic (LTCC) process, and their s-parameters are measured between 50 MHz and 5 GHz. The circuit model parameters of each building block are optimized and extracted using the partial element equivalent circuit method and an HSPICE circuit simulator. Based on the model parameters, the characteristics of the test structures such as self-resonant frequency, inductance, and quality (Q) factor are analyzed, and predictive modeling is applied to the structures composed of a combination of the modeled building blocks. In addition, characteristic variations of the 3-D inductors with different structures using extracted building blocks are also investigated. This approach can provide a characteristic estimation of 3-D solenoid embedded inductors for structural variations.

• Transactions on Electrical and Electronic Materials
• /
• 제12권6호
• /
• pp.245-248
• /
• 2011

The scaling down of metal oxide semiconductor field-effect transistors (MOSFETs) for the last several years has contributed to the reduction of the scaling variables and device parameters as well as the operating voltage of the MOSFET. At the same time, the variation in the electrical characteristics of MOSFETs is one of the major issues that need to be solved. Especially because the issue with variation is magnified as the drive voltage is decreased. Therefore, this paper will focus on the variations between electrical characteristics and drain voltage. In order to do this, the test patterned multi-finger MOSFETs using 90-nm process is used to investigate the characteristic variations, such as the threshold voltage, DIBL, subthreshold swing, transconductance and mobility via parasitic resistance extraction method. These characteristics can be analyzed by varying the gate width and length, and the number of fingers. Through this modeling scheme, the characteristic variations of multi-finger MOSFETs can be analyzed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.43-46
• /
• 1995

We fabricate a bottom gate a-Si:H TFT on N-Type <100> Si wafer. According to the variation of gate and drain voltage, the hysteresis characteristic curves were measured experimentally. Also, we showed that the model predict the hysteresis characteristic successfully. Drain current on the hysteresis characteristic currie showed an exponential variation. Hysteresis area of TFT increased with the drain voltage increase and decreases with the drain voltage decrease.

• 대한전기학회논문지
• /
• 제43권7호
• /
• pp.1135-1143
• /
• 1994

We fabricate a bottom gate a-Si:H TFT on N-Type <100> Si wafer. According to the Variation of gate and drain voltage, the hysteresis characteristic curves were measured experimentally. Also, we proposed model equation and showed that the model predict the hysteresis characteristic successfully. Drain current on the hysteresis characteristic curve showed an exponential variation. Hysteresis area of TFT increased with the drain voltage increase and decreases with the drain voltage decrease.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권1호
• /
• pp.45-50
• /
• 2013

This paper presents design of induction motor in very low temperature for LNG main cargo pump and comparison of two motors. One is the motor for using in room temperature and another is the motor for using very low temperature. This paper designs with Equivalent circuit Method and uses Finite Element Method to analysis. The motor for very low temperature considers variation of coil resistivity due to temperature change and compare torque characteristic with the motor for room temperature. Design element of motor for very low temperature considers resistivity variation following temperature change on going through this paper. The result shows that two types of motors are almost same torque curve characteristic even though they are not the same environment.

• 품질경영학회지
• /
• 제32권4호
• /
• pp.265-273
• /
• 2004

We got the growth distance curve by spline smoothing method with observed marketing data and the growth velocity curve by the derivation of the growth distance curve. Using this growth velocity curve, we defined the several characteristic points which describe the variation of marketing data. In this paper, to specify several patterns of marketing data, we suggested characteristic function by using these characteristic points. In addition, we applied characteristic function to the seventeen brands of electric home products data.

• 산업기술연구
• /
• 제29권B호
• /
• pp.3-7
• /
• 2009

A cylindrical pin fin with inside fluid is optimized based on fixed fin volume by using the one dimensional analytic method. Heat loss from the fin and the pin fin radius for fixed fin volume is presented as a function of the fin length. Temperature variation of the fin with the variation of ambient and inside fluid convection characteristic numbers and fin base thickness is listed. The maximum heat loss at the practical fin length and corresponding optimum fin length and radius are presented as a function of fin base thickness, inside convection characteristic number, fin volume and ambient convection characteristic number. One of the results shows that the optimum pin fin shape becomes relatively fatter as the fin volume increases.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.1883-1886
• /
• 2003

Gait is defined as "a manor of walking". It can used as a biometric measure to recognize known persons. Gait is an idiosyncratic feature determined by an individual's weight, stride length, and posture combined with characteristic motion. but its feature extracted from images varies with the viewpoint. In this paper, we propose a gait recognition method using a planer homography, which is robust for viewpoint variation. We represent an individual as key-silhouettes. And we endow key-silhouettes with weight calculated using the characteristic of PCA. Experimental result shows that proposed method is robust for viewpoint variation as images synthesised same viewpoint.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.233-236
• /
• 2006

In this paper, I try to measure characteristic transmission-reflection by environmental change or solar cell. I keep my eye on the characteristics variation of solar cell as environmental change. As a result, A variation caused by voltage by an effect on the efficiency of solar PV cell. Hence, it is an important variable when a designer plan to make a solar cell.

• 비교문화연구
• /
• 제21권
• /
• pp.213-254
• /
• 2010

The goal of this thesis is to make a comparative study about the variant form of the Chinese character in the five sorts of old maps drawing outside of the main gates of old map including DeDongYei-jido. The main task of this thesis can be classified under three heads - (1) introducing the literature of comparative study in the five sorts of old maps including DeDongYei-jido (2) classification of variant form in the five sorts of old maps (3) characteristic of variant form in the five sorts of old maps. In this thesis, aspect of variant form is classified under six head - (1) variation of the whole shape of the character (2) taking place the variation in both sides of Chinese character (3) taking place the variation in part (4) taking place variation in the strokes of the Chinese character (5) misusing different characters (6) changing different characters. This thesis explains some characteristic of variant form - (1) simplification of the shape of characters (2) using the Hou-qi-zi(後起字, Chinese character which is actually the same but made the next) (3) replacing the overlapped both sides of Chinese character with omit mark (4) a wrongly written character (5) discovering the variant form such as variant form of 廣, 广 variant form of 廛, variant form of 院 which was not recorded in Chinese literature. From now on, there should be some collections of variant form of Korean style and study. we are going to have to standardize aspect of variation and rule of variant form in old maps until we have to make some ways to recognize the block letter.