• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.517-522
• /
• 2002

The frequency response function(FRF) of each substructure is used for the transfer function synthesis method(TFS). The dynamic characteristics of the full system are obtained by synthesizing FRFs of each substructure. The validation of TFS depends on accuracy for FRF of each substructure. Impact hammer testing is widely used to obtain the modal characteristics of structures. However, the FRF obtained from impact hammer testing contains several errors, such as finite record length error and leakage error of which characteristic depends on data acquisition time which we call record length. In this paper, a method to remove these errors is proposed so as to enhance results of TFS. Numerical examples show that the FRF of full structure can be predicted exactly by the method proposed in this paper.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.407-409
• /
• 1998

This paper deals with temporal-difference learning that is a method for approximating long-term future cost as a function of current state in knowlege-poor environment, a function approximator is used to approximate the mapping from state to future cost, a linear function approximator is limited because mapping from state to future cost has a nonlinear characteristic, so a nonlinear function approximator is used to approximate the mapping from state to future cost in this paper, and that TD learning using a nonlinear function approximator is stable is proved.

• Journal of Applied Reliability
• /
• v.1 no.1
• /
• pp.35-46
• /
• 2001

Replacement policy of a degradation system is investigated by incorporating the loss function. Loss function is defined by the deviation of the value of quality characteristic from its target value, which determines the loss cost. Cost function is comprised of the inspection cost, replacement cost and loss cost. Two cost minimization problems are formulated : 1)determination of an optimal inspection period given the state for the replacement and 2)determination of an optimal state for replacement under fixed inspection period. Simulation analysis is performed to observe the variation of total cost with respect to the variation of the parameters of loss function and inspection cost, respectively As a result, parameters of loss function are seen to be the most sensitive to the total cost. On the contrary, inspection cost is observed to be insensitive. This study can be applied to the replacement policy of a degradation system which has to produce the quality critical product.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1051_1052
• /
• 2009

This paper deals with operational characteristic analysis of a single-phase PCS (Power Conditioning System) for PV (Photovoltaic) power generation system with AF (Active Filter) function. The theory of dq transformation has been applied to the control strategy of a single-phase PV power generation system to implement the AF function. Application of the virtual two-phase using phase-shift makes it possible to use the dq theory for the single-phase PV power generation system. The authors are sure that the proposed system is a very useful to compensate harmonics caused by nonlinear loads in a single-phase utility system. In this paper, not only a theoretical aspect of the single-phase PV-AF system is discussed, but also the DSP (Digital Signal Processor) based experiment results are presented to demonstrate the effectiveness of the single-phase PV-AF system.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.1
• /
• pp.18-22
• /
• 2013

This paper describes the information for quantitative simulation of weakly ionized plasma. We must grasp the meaning of the plasma state condition to utilize engineering application and to understand materials of plasma state. Using quantitative simulations of weakly ionized plasma, we can analyze gas characteristic. In this paper, the electron transport characteristic in $CH_4$ has been analysed over the E/N range 0.1~300[Td], at the 300[$_{\circ}\;K$] by the two term approximation Boltzmann equation method and Monte Carlo Simulation. Boltzmann equation method has also been used to predict swarm parameter using the same cross sections as input. The behavior of electron has been calculated to give swarm parameter for the electron energy distribution function has been analysed in $CH_4$ at E/N=10, 100 for a case of the equilibrium region in the mean energy. A set of electron collision cross section has been assembled and used in Monte Carlo simulation to predict values of swarm parameters. The result of Boltzmann equation and Monte Carlo Simulation has been compared with experimental data by Ohmori, Lucas and Carter. The swarm parameter from the swarm study are expected to sever as a critical test of current theories of low energy scattering by atoms and molecules.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.310-312
• /
• 2011

In complex noise environment, digital filter is being used to obtain, transport and storage original voice or image signal. Digital filter can be largely separated FIR(Finite duration impulse response) filter and IIR(Infinite duration impulse response) filter. Among FIR filter, window function has characteristic of linear phase and as can be easily set pass-band frequency, cutoff frequency and so on. In this paper, We compared with established method using transient characteristic and peak side-lobe in order to check filter characteristics after we designed the existing variants of the window function.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.1
• /
• pp.269-286
• /
• 2018

Signal detection in symmetric alpha-stable ($S{\alpha}S$) distributed noise is a challenging problem. This paper proposes a detector based on a decreasing exponential function (DEF). The DEF detector can effectively suppress the impulsive noise and achieve good performance in the presence of $S{\alpha}S$ noise. The analytical expressions of the detection and false alarm probabilities of the DEF detector are derived, and the parameter optimization for the detector is discussed. A performance analysis shows that the DEF detector has much lower computational complexity than the Gaussian kernelized energy detector (GKED), and it performs better than the latter in $S{\alpha}S$ noise with small characteristic exponent values. In addition, the DEF detector outperforms the fractional lower order moment (FLOM)-based detector in $S{\alpha}S$ noise for most characteristic exponent values with the same order of magnitude of computational complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1C
• /
• pp.105-112
• /
• 2009

In this paper, we propose a digital watermarking method using Multi-resolution Characteristic of 2D CAT (2D cellular automata transform). Firstly, we select the gateway values to generate a basis function and the basis function transforms images into cellular automata space. Then, we embed the random bit sequence as watermark in specific parts of cellular automata transform coefficients. The proposed method not only verifies higher fidelity than the existing method but also stronger stability on JPEG lossy compression, filtering, sharpening and noise through tests for robustness. Moreover, the proposed scheme allows only one 2D CAT basis function per gateway value. Since there are $2^{96}$ possible gateway values.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.7
• /
• pp.3690-3713
• /
• 2019

According to the main group key management schemes logical key hierarchy (LKH), exclusion basis systems (EBS) and other group key schemes are limited in network structure, collusion attack, high energy consumption, and the single point of failure, this paper presents a group key management scheme for wireless sensor networks based on Lagrange interpolation polynomial characteristic (AGKMS). That Chinese remainder theorem is turned into a Lagrange interpolation polynomial based on the function property of Chinese remainder theorem firstly. And then the base station (BS) generates a Lagrange interpolation polynomial function f(x) and turns it to be a mix-function f(x)' based on the key information m(i) of node i. In the end, node i can obtain the group key K by receiving the message f(m(i))' from the cluster head node j. The analysis results of safety performance show that AGKMS has good network security, key independence, anti-capture, low storage cost, low computation cost, and good scalability.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.8
• /
• pp.2565-2574
• /
• 2000

The error diffusion method is good for reproducing continuous image to binary image. However the reproduction of edge characteristic is weak in power spectrum analysis of display error. In this paper. we present an edge-enhanced error-diffusion method which include pre-processing algorithm for edge characteristic enhancement. Pre-processing algorithm consists of the difference value between current pixel and local average of original image and weighting function of pre-filter. First. it is obtained the difference value between current pixel and the local average of peripheral pixels(5x5) in original image. Second, weighting function of pre-filter is composed by function including absolute value and sign of difference value. The improved Error diffusion algorithm using pre-processing algorithm, present a good result visually which edge characteristic is enhanced. The performance of the proposed algorithm is compared with that of the conventional edge-enhanced error diffusion by measuring the RAPSD of display error, the egde correlation and the local average accordance.