• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.1
• /
• pp.57-62
• /
• 2013

Because of high torque and easiness of speed control, Direct Current(DC) motors have been used for a long time. But, its applications are limited in circumstance and performance, since they contained brush and commutator. The commutation characteristic gives effect to life and performance of the DC motor. Naturally, the commutation characteristic analysis is strongly required. In this paper, With the result of finite element analysis, The inductance is calculated each rotor position and applied to the voltage equations coupled with commutation equation. Also, contact resistances of brush/commutator assembly are considered using contact area and brush width converted with commutator segments. The time derivative term in the differential equation is solved in time difference method. This algorithm was applied to 2-pole shunt DC motor. We considered commutation characteristic by changing contact resistance between brush and commutator segment.

• International Journal of Railway
• /
• v.3 no.1
• /
• pp.14-18
• /
• 2010

This paper describes design and characteristic analysis of long primary type linear synchronous motor (LSM) for high speed train system. LSM is designed using loading distribution method and magnetic equivalent circuit. For characteristic analysis of LSM, analytical and numerical methods are applied. Analytical method for solving the magnetic field distribution of the analytic model is based on the Maxwell’s equations. Using the characteristic equation and magnetic equivalent circuit, we analyze the effect of variation of parameters, and then we validate the result by comparing with numerical method by finite element method (FEM). We compare the analytical method with numerical method for analyzing the effect by variable parameters. This result will be useful of design and forecast of performance without FEM.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.3
• /
• pp.224-229
• /
• 2004

In order to control the railway noise, the radiation characteristic of the noise when the train passes by should be analyzed. Generally, the major noise sources of the Korea Train Express are the rolling noise and power unit noise up to 300km/h. In this paper, a train model that is considered to be a row of point sourcesis introduced to analyze the radiation characteristic. The analysis results are compared with the measurement ones. It is shown that the propagation characteristic of the rolling noise is a dipole type and the noise generated by the power unit is radiated as a cosine type. With increasing of the train speed, the noise level at a receiving point is increased in the direction of motion and reduced in the direction opposite to the motion. The analysis results including the moving effect of the noise source at 300km/h show good agreement with the measurement results.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.1
• /
• pp.67-73
• /
• 2000

The water quality of inland stream is polluting with industrialization and urbanization, and with that water quality of lake also deteriorated, to manage water quality pollution problem of lake, new water quality management method is needed. As a pilot study of the method that manage water quality of lake using GSIS(Geo-Spatial Information System), we study the method which automatically extract the hydraulic characteristic informations of lake in GSIS environment. Also, as an example of practical use of the extracted hydraulic characteristic information of lake, we carry out the characteristic analysis of waterbody flow using finite different method. With the automation the extraction procedure of hydraulics characteristic information needed in characteristic analysis of waterbody flow, we carried out the analysis efficiently. Particularly, with the extraction of section information on lake not in layout form, in analyzable form, we make the analysis that section information of lake was indispenably required(e.g. stratification analysis) possible in GSIS environment.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.753-755
• /
• 2002

This paper presents the characteristic analysis by changing the shape and position of auxiliary pole core for Automotive stater motor. The brush contact resistance and mechanical loss calculated from the experimental data are used in characteristic analysis. The Finite Element Analysis Method(FEM) and 3D Equivalent Magnet Circuit Network(EMCN) are used for analysis. The validity of the proposed methods are verified by comparison of analysis results and experimental ones.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2000.04a
• /
• pp.157-162
• /
• 2000

Discriminant analysis is a method to relate whether the objects have a specific characteristic or not with their 'continuous' attribute values and, for given objects, to estimate whether they have a specific characteristic or not by their values of discriminant scores gotten from their attribute values. The author developed the new 'computational' method of discriminant analysis without specific hypotheses or assumptions and, by this new method, we can find 'feasible' solutions under the conditions required by our actual problems. In this paper, the author tried to apply this new method to the discrimination of logical relations. If this trial could be a success, we can apply this new method of discriminant analysis to the problems about relating the specific characteristic of the objects with their 'discrete' attribute values. The result was successful and the applicability of discriminant analysis could be expanded as a method for constructing the models for "estimating impressions".

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.12
• /
• pp.1686-1694
• /
• 2015

Stator tooth segmentation and back-iron segmentation is key solution to easing the burden of manufacturing process of permanent magnet synchronous motor. The purpose of this paper is the design and characteristic analysis of permanent magnet synchronous motor having the segmented phase modular stators. Using by two-dimensional finite element method, the static/no-load characteristic analysis of the permanent magnet synchronous motor is performed. The analysis has been performed considering the additional air gaps between stator modules. The analysis results were experimentally verified, and the validity of the proposed analysis method and feasibility of the machine was confirmed.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.13 no.1
• /
• pp.1-9
• /
• 1988

The purpose of this paper is study the sensitivity analysis of matrix game. Teh sensitivity analysis of matrix is classified into two types. Type one is to find the characteristic region of an element of the pay off matrix in which the value of the current optimal strategy remains as an optimum. Type two is to find that in which the basis of the current optimal strategy does not change. This paper shows the characteristic regions of basic and nonbasic strategies. Further it is found that the characteristic regions of type one and two are same in the case that the element is that of at least one player's nonbasic strategy.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.83-85
• /
• 2006

In this paper, the dynamic characteristic according to variable load of Permanent magnet Linear Synchronous Motor(PMLSM) is dealt with carefully. And the experiment machine is manufactured for analysis of dynamic characteristic. The results of both simulation and experiment are discussed.

• Management Science and Financial Engineering
• /
• v.10 no.2
• /
• pp.103-118
• /
• 2004

$\epsilon$-sensitivity analysis is a kind of methods for performing sensitivity analysis for linear programming. Its main advantage is that it can be directly applied for interior-point methods with a little computation. Although $\epsilon$-sensitivity analysis was proposed several years ago, there have been no studies on its relationship with other sensitivity analysis methods. In this paper, we discuss the relationship between $\epsilon$-sensitivity analysis and sensitivity analysis using an optimal basis. First. we present a property of $\epsilon$-sensitivity analysis, from which we derive a simplified formula for finding the characteristic region of $\epsilon$-sensitivity analysis. Next, using the simplified formula, we examine the relationship between $\epsilon$-sensitivity analysis and sensitivity analysis using optimal basis when an $\epsilon$-optimal solution is sufficiently close to an optimal extreme solution. We show that under primal nondegeneracy or dual non degeneracy of an optimal extreme solution, the characteristic region of $\epsilon$-sensitivity analysis converges to that of sensitivity analysis using an optimal basis. However, for the case of both primal and dual degeneracy, we present an example in which the characteristic region of $\epsilon$-sensitivity analysis is different from that of sensitivity analysis using an optimal basis.