• Journal of Electrical Engineering and Technology
• /
• v.3 no.3
• /
• pp.314-319
• /
• 2008

Power quality simulation plays an important role in many practical cases, for example, when deciding the capacity of the related mitigation devices, assessing the influence of installing a nonlinear load in the distribution part, dissolving the quality issues between utilities and customers, and so on. For these purposes, many dedicated tools have been used in order to assess the level of quality distortions by various kinds of PQ indices. However, there are few modules that can accurately simulate the flicker phenomenon, that is, $P_{st}$ and the nonlinear and chaotic behavior of the electrical arc furnace, which is one of the representative nonlinear loads. This paper deals with the useful and simple modules for the voltage flicker simulation in the distribution and transmission level under the environment of Matlab/Simulink. With these modules, the various conditions of distribution systems and the capacities of arc furnaces with the chaotic characteristic can be easily taken into account.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.600-605
• /
• 2002

The keyhole formed by high energy density laser-material interaction periodically collapses due to surface tension of the molten metal in partial penetration welds. The collapse sometimes traps a void at the bottom of the keyhole, and it remains as welding defects. This phenomenon is seen as one cause of the instability of the keyhole during laser beam welding. Thus, it seems likely that improving the stability of the keyhole can reduce voids and uniform the penetration depth. The goal of this work is to develop techniques for controlling laser weld keyhole dynamics to reduce weld defects such as voids and inconsistent penetration. Statistical analysis of the penetration depth signals in glycerin determined that keyhole dynamics are chaotic. The chaotic nature of keyhole fluctuations and the ability of laser power modulation to control them have been demonstrated by high-speed video images of laser welds in glycerin. Additionally, an incident leading beam angle is applied to enhance the stability of the keyhole. The quasi-sinusoidal laser beam power of 400Hz frequency and 15$^{\circ}$ incident leading beam angle were determined to be the optimum parameters for the reduction of voids. Finally, chaos analyses of uncontrolled signals and controlled signals were done to show the effectiveness of modulation on the keyhole dynamics. Three-dimensional phase plots for uncontrolled system and controlled system are produced to demonstrate that the chaotic keyhole dynamics is converted to regular periodic behavior by control methods: power modulation and incident leading beam angle.

• Journal of Information Processing Systems
• /
• v.19 no.6
• /
• pp.767-777
• /
• 2023

In modern society, user privacy is emerging as an important issue as closed-circuit television (CCTV) systems increase rapidly in various public and private spaces. If CCTV cameras monitor sensitive areas or personal spaces, they can infringe on personal privacy. Someone's behavior patterns, sensitive information, residence, etc. can be exposed, and if the image data collected from CCTV is not properly protected, there can be a risk of data leakage by hackers or illegal accessors. This paper presents an innovative approach to "machine learning based reversible chaotic masking method for user privacy protection in CCTV environment." The proposed method was developed to protect an individual's identity within CCTV images while maintaining the usefulness of the data for surveillance and analysis purposes. This method utilizes a two-step process for user privacy. First, machine learning models are trained to accurately detect and locate human subjects within the CCTV frame. This model is designed to identify individuals accurately and robustly by leveraging state-of-the-art object detection techniques. When an individual is detected, reversible chaos masking technology is applied. This masking technique uses chaos maps to create complex patterns to hide individual facial features and identifiable characteristics. Above all, the generated mask can be reversibly applied and removed, allowing authorized users to access the original unmasking image.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.7
• /
• pp.845-850
• /
• 2015

Love which is one of the emotional of mankind, has been studied in sociology and psychology as a matter of great concern. Through such a research, the researchers have provided the basic mathematical model for love model, we cannot find nonlinear characteristics through the basic love model. Therefore, in this paper, in order to find nonlinear behaviors in the basic love model, we apply external force to the basic love model. Then we confirm the existence of nonlinear behaviors through time series and phase portrait. We also confirm that this nonlinear behaviors have the periodic doubling, chaotic phenomena and periodic process which are very similar to typical chaotic occurrence phenomena.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.1
• /
• pp.57-65
• /
• 2000

In this paper, a model reference adaptive control for the atomic force microscope (AFM) of tapping mode is investigated. The dynamics between the AFM system and al sample is mathematically modeled as a second order spring-mass-damper system with oscillatory inputs. The attractive and repulsive forces between the tip of the AFM system and the sample are derived using the Lennard-Jones potential energy. By non-dimensionalizing the displacement of the tip and the input frequency, the chaotic behavior near a resonance frequency is better depicted through the non-dimensionalized equations. Four nonlinear analysis techniques, a phase portrait, sensitive dependence on initial conditions, a power spectral density function, and a Pomcare map are investigated. Because the equations of motion derived in this paper involve unknown parameter values such as the damping effect of the air and the interaction constants between materials, the standard model reference adaptive control is adopted. Two control objectives, the prevention of chaos and the tracking of reference signal, are pursued. Simulation results are included.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.4
• /
• pp.907-912
• /
• 2009

Complex breakup behavior in the revival wave has been observed in the Belousov-Zhabotinsky(BZ) reaction system containing 1,4-cyclohexanedione (1,4-CHD) in the dish divided into two compartments with a sliding window. A same reaction mixture is poured into the two compartments individually with time difference. Wave propagation exhibited different behavior in the revival wave of the reaction system. This was largely dependent on the progress time prior to the pouring into each compartment and on the gap between the times of pouring into the two compartments. The revival wave in the reaction system is induced spontaneously as a new wave train with a long time lag after the disappearance of the initially induced wave. A thoroughgoing study of the chaotic breakup of propagating chemical wave train was to be possible since the revival wave has a longer wavelength, clearer wave-train patterns, and longer duration period.

• 한국가시화정보학회:학술대회논문집
• /
• 2005.12a
• /
• pp.99-102
• /
• 2005

This study was conducted for obtaining the optimized data to build the mixer or micro fluid device as measuring the three dimensions flow field in micro mixer. To acquire the rapid diffusion on the region of low Reynolds (Re < 100), the staggered herringbone mixer using chaotic advection was selected in this case. At first, by conducting the numerical analytical virtual experiment using CFD-ACE+, three dimensions flow field in the micro mixer was estimated As this flow field was proven using defocusing particle tracing method, the behavior of micro flow with three dimensional aspects could be analyzed. Numerical analysis and flow pattern in the micro mixer by experimental verification made to be able to analyze the chaotic advection. These can be important sources for building more optimized form. Verifying the information of three dimensional flow structure, these information can be used as the data for developing and improving the $\mu$ -TAS.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.437-450
• /
• 1994

The problem of testing for a change in the parameter of a stochastic process is particularly important in simulation studies. In studies of the steady state characteristics of a simulation model, it is important to identify initialization bias and to evaluate efforts to control this problem. A simulation output have the characteristics of chaotic behavior because of sensitive dependence on initial conditions. For that reason, we will apply Lyapunov exponent for diagnosis of chaotic motion to simulation output analysis. This paper proposes two methods for diagnosis of steady state in simulation output. In order to evaluate the performance and effectiveness of these methods using chaos theory, M/M/I(.inf.) queueing model is used for testing point estimator, average bias.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.4
• /
• pp.235-242
• /
• 2003

In this paper, a fuzzy controller is designed to suppress and stabilize the chaotic behavior of Chua's circuit. This controller is constructed by the following two phases. First, Chua's circuit is represented by an affine fuzzy model. Second, a fuzzy controller is designed so that the stability of the closed-loop system composed of the fuzzy controller and the affine fuzzy model of Chua's circuit is rigorously guaranteed. The stability condition of the affine fuzzy system is derived and is recast in the formulation of linear matrix inequalities. The guaranteed stability is global and asymptotic. Finally, the applicability of the suggested methodology is highlighted via computer simulations.

• The Korean Journal of Ceramics
• /
• v.3 no.4
• /
• pp.239-244
• /
• 1997

The Voronoi network can be used to effectively simulate the microstructure of ZnO varistors. The nonuniformity in microstructure of simulated ZnO varistor can be changed by setting different disorder degree of Voronoi network. In the region of disorder degree larger than 3 where the simulated microstructures are similar to those the actual ones of ZnO varistors, a chaotic phenomenon exists in the microstructure characteristics. This chaotic property can simulate the original behavior of nonuniformity of electrical characteristics caused by microstructures of ZnO varistors.