• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.357-362
• /
• 2021

UWB(ultra wide band) communication systems employ short pulses to transmit information which spreads the signal energy over a very wide frequency spectrum. Received signal-to-noise power ratio of UWB signals is an important factor in determining the accuracy of a positioning system. As the signal to noise power ratio gets higher, positioning errors decrease since noise becomes less effective. Calculation of signal to noise power ratio as a function of communication distance provides important guidelines for the system design. And the performance of a positioning system also depends heavily on the channel model. As a result of the analysis, it was found that the performance of the received signal to noise power ratio according to the communication distance was better in the LOS channel environment than in the Non LOS(line of sight) channel environment. And as the symbol interval of the preamble signal increases at a specific communication distance, the channel capacity of the UWB system increases.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.125-130
• /
• 2005

This paper suggests an efficient method of protection ratio calculation and shows some calculated results applicable to frequency coordination in microwave relay system networks, and the net filter discrimination (NFD) associated with Tx spectrum mask and overall Rx filter characteristics has been examined to obtain the adjacent channel protection ratio. The protection ratio comprises several factors such as C/N of modulation scheme, noise-to-interference ratio, multiple interference allowance, fade margins of multi-path and rain attenuation, and NFD. According to computed results for 6.7 GHz, 64-QAM, and 60 km at BER $10^{-6}$, fade margin and co-channel protection ratio are 41.1 and 75.2 dB, respectively, In addition, NFD for channel bandwidth of 40 MHz reveals 28.9 dB at the first adjacent channel, which results in adjacent channel protection ratio of 46.3 dB. The proposed method provides some merits of an easy calculation, systematic extension, and applying the same concept to frequency coordination in millimeter wave relay system networks.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.7
• /
• pp.89-93
• /
• 2001

In recent years Fiber optic hydrophone systems have been the focus of much attention in the sonar world. For sonar arrays, a fiber optic approach offers the major benefit of passive multiplexing of large numbers of hydrophones without underwater electronics. This paper describes recent development work covering array construction, opto-electronics development, hydrohpone design and sea trials. And the development of an interferometric mult-channel fiber optic hydrophone system which uses time division multiplexing capable of driving in excess of 32 channel is described. For this, a 12 channel time division multiplexing array has been constructed, and the performance of this system is demonstrated by sea trial.

• Journal of Communications and Networks
• /
• v.8 no.1
• /
• pp.13-20
• /
• 2006

In cellular mobile communications, how to achieve optimum system capacity with limited frequency spectrum is one of the main research issues. Many dynamic channel assignment (DCA) schemes have been proposed and studied to allocate the channels more efficiently, thus, the capacity of cellular systems is improved. Reuse partitioning (RP) is another technique to achieve higher capacity by reducing the overall reuse distance. In this paper, we present a network-based DCA scheme with the implementation of RP technique, namely dynamic reuse partitioning with interference information (DRP-WI). The scheme aims to minimize the effect of assigned channels on the availability of channels for use in the interfering cells and to reduce their overall reuse distances. The performance of DRP-WI is measured in terms of blocking probability and system capacity. Simulation results have confirmed the effectiveness of DRP-WI scheme. Under both uniform and non-uniform traffic distributions, DRP-WI exhibits outstanding performance in improving the system capacity. It can provide about 100% capacity improvement as compared to conventional fixed channel assignment scheme with 70 system channels.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.5
• /
• pp.333-341
• /
• 2012

Modeling and simulation is important for military training. People can feel perspective when stereoscope images are created using multi-channel visualizations. A submarine oscillates when the submarine is just below the surface of the sea, so that the reconnaissance becomes difficult. Also, the operator should read the information of the target within 6 seconds using the periscope. The operator must have experience. To solve these problems, stereoscopic multi-channel visualization has been tested. The iCAVE system of KAIST provides a large-scale screen, 7 PCs, and 14 projectors to create the stereoscope images. To simulate the motion of a submarine just below the ocean surface, a 4-DOF motion platform is used. The motion data is transmitted to the visual system and the motion platform through the UDP protocol. Variety of weather conditions are created using the Vega Prime software. The stereoscopic multi-channel visualization and the motion platform system created a realistic simulation system.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2001.11a
• /
• pp.340-347
• /
• 2001

Security operating system applied to MAC(Mandatory Access Control) or to MLS(Multi Level Security) gives both subject and object both Security Level and value of Category, and it restrict access to object from subject. But it violates Security policy of system and could be a circulated course of illegal information. This is correctly IPC(Interprocess Communication)mechanism and Covert Channel. In this thesis, I tried to design and implementation as OS kernel in order not only to give confidence of information circulation in the Security system, but also to defend from Covert Channel by Storage and IPC mechanism used as a circulated course of illegal information. For removing a illegal information flow by IPC mechanism. I applied IPC mechanism to MLS Security policy, and I made Storage Covert Channel analyze system call Spec. and than distinguish Storage Covert Channel. By appling auditing and delaying, I dealt with making low bandwidth.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.6
• /
• pp.564-571
• /
• 2014

A single-stage current-balancing multi-channel light-emitting diode (LED) driver is proposed in this study. The conventional LED driver system consists of two cascaded power conversion stages, i.e., an isolation DC/DC converter and LED driver. LED driver is usually implemented with the same number of expensive boost converters as those of LED channels to tightly control the current through each LED channel. Therefore, its overall system size is not only bulky, but the cost is rather high. By contrast, the proposed LED driver system is composed of a single power stage with the DC/DC converter and LED driver merged. Although the current balancing circuit of the proposed LED driver requires only passive devices instead of expensive boost converters, all currents through multi-channel LEDs can be well balanced. Therefore, the proposed LED driver features a small system size, improved efficiency, and low cost. To confirm the validity of the proposed driver, its operation and performance are verified on a prototype for a 46" LED TV.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9B
• /
• pp.892-899
• /
• 2009

Reuse-partitioning is a simple technique that can be used to improve the capacity of a cellular system. In the previous researches, authors do not explain how a channel is selected and what happens when there is no channel available when a call arrives. Therefore, in this paper, we describe a simple channel selection procedure and analyze the performance of a system. The performance is presented in terms of the channel utilization and call blocking probability by varying offered load per cell. Our analytical results may be added in a realistic performance analysis of reuse-partitioning-based system.

• Journal of Haehwa Medicine
• /
• v.17 no.1
• /
• pp.137-143
• /
• 2008

We have conclusions after the study of muscular system about large intestine channel of hand yangmyung muscle. 1. Judging from many studies of interrelation between Meridian muscle and muscle. it is considered that Meridian muscle theory has some similarities with modern anatomical muscular system. 2. There is a wide defference betwean myofacial pain syndrome and meridian muscle theory in that the former explains each muscle individually, while the latter classifies muscles systematically in the view of organism. 3. It is considered that large intestine channel of hand yangmyung muscle contains extensor digitorum muscle, extensor muscle of index finger, brachioradialis muscle, triceps brachii muscle, Rhomboid major muscle, trapezius muscle, sternocleidomastoid muscle and muscle levator labii. 4. The symptoms of large intestine channel of hand yangmyung muscle is similar to referred pain of modern Myofacial pain syndrome, and the medical treatment of "I-Tong-Wi-Su" is similar to that of Myofacial pain syndrome.

• Nuclear Engineering and Technology
• /
• v.47 no.5
• /
• pp.534-545
• /
• 2015

In the very high temperature reactor (VHTR), which is a next generation nuclear reactor system, ceramics are used as a fuel coating material and graphite is used as a core structural material. Even if a depressurization accident occurs and the reactor power goes up instantly, the temperature of the core will change only slowly. This is because the thermal capacity of the core is so high. Therefore, the VHTR system can passively remove the decay heat of the core by natural convection and radiation from the surface of the reactor pressure vessel. The objectives of this study are to investigate the heat transfer characteristics of natural convection of a one-side heated vertical channel with inserted porous materials of high porosity and also to develop the passive cooling system for the VHTR. An experiment was carried out using a one-side heated vertical rectangular channel. To obtain the heat transfer and fluid flow characteristics of the vertical channel with inserted porous material, we have also carried out a numerical analysis using a commercial Computational Fluid Dynamics (CFD) code. This paper describes the thermal performances of the one-side heated vertical rectangular channel with an inserted copper wire of high porosity.