• International Journal of Computer Science & Network Security
• /
• v.23 no.9
• /
• pp.8-16
• /
• 2023

In Japan, high-speed ground transportation service using linear motors at speeds of 500 km/h is scheduled to begin in 2027. To accommodate 5G services in trains, a subcarrier spacing frequency of 30 kHz will be used instead of the typical 15 kHz subcarrier spacing to mitigate Doppler effects in such high-speed transport. Furthermore, to increase the cell size of the 5G mobile system, multiple base station antennas will transmit identical downlink (DL) signals to form an expanded cell size along the train rails. In this situation, the forward and backward antenna signals are Doppler-shifted in opposite directions, respectively, so the receiver in the train may suffer from estimating the exact Channel Transfer Function (CTF) for demodulation. In a previously published paper, we proposed a channel estimator based on Delay and Doppler Profiler (DDP) in a 5G SISO (Single Input Single Output) environment and successfully implemented it in a signal processing simulation system. In this paper, we extend it to 2×2 MIMO (Multiple Input Multiple Output) with spatial multiplexing environment and confirm that the delay and DDP based channel estimator is also effective in 2×2 MIMO environment. Its simulation performance is compared with that of a conventional time-domain linear interpolation estimator. The simulation results show that in a 2×2 MIMO environment, the conventional channel estimator can barely achieve QPSK modulation at speeds below 100 km/h and has poor CNR performance versus SISO. The performance degradation of CNR against DDP SISO is only 6dB to 7dB. And even under severe channel conditions such as 500km/h and 8-path inverse Doppler shift environment, the error rate can be reduced by combining the error with LDPC to reduce the error rate and improve the performance in 2×2 MIMO. QPSK modulation scheme in 2×2 MIMO can be used under severe channel conditions such as 500 km/h and 8-path inverse Doppler shift environment.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.75-78
• /
• 2004

In this paper, we analyze the performance of transmitter and receiver of W-CDMA system using the channel coding and space time code in downlink over ITU-R realistic channel model. We can improve the data rate and the reliability of communications by a channel code, and we can get a diversity gain by using the space time code over fading channels. We also apply the RAKE receiver to improve a performance in multi-path fading channel environment.

• Journal of Communications and Networks
• /
• v.5 no.2
• /
• pp.167-173
• /
• 2003

We treat the problem of channel estimation and interference cancellation in multiuser ultra-wide-band (UWB) communication systems over multipath fading channels. The UWB system under consideration employs a random time-hopping impulse radio format. We develop a channel estimation method based on linear weighted algorithm. An iterative channel estimation and interference cancellation scheme is proposed to successively improve the receiver performance. We also consider systems employing multiple transmit and/or receive antennas. For systems with multiple receive antennas, we develop a diversity receiver for the wellseparated antennas. For systems with multiple transmit antennas, we propose to make use of Alamouti’s space-time transmission scheme, and develop the corresponding channel estimation and interference cancellation receiver techniques. Simulation results are provided to demonstrate the performance of various UWB receiver techniques developed in this paper.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.11
• /
• pp.2817-2827
• /
• 1996

In this paper, we propose a new channel assignment scheme considering traffic characteristics in the CDMA cellular system. The object of proposed method is to reduce the hard handoff of data calls which are very sensitive to transmission errors. In this algorithm, we use three channel assignment policies. First, all of the data calls are assigned to the primary CDMA channel if possible. Second, priority for primary CDMA channel is given to data calls by assigning some primary CDMA traffic channels exclusively for data calls. Third, data calls are assigned to the CDMA channel most served by neighbor cells, when all of the primary CDMA traffic channels are used. A performance analysis shows the minimum soft handoff probability of data calls in handoff which is guarantied any cellconfiguration is increased above 40% by the adopting proposed algorithm.

• ETRI Journal
• /
• v.20 no.1
• /
• pp.16-27
• /
• 1998

In this paper, we consider the acquisition performance of an IS-95 reverse link access channel slot as a function of system design parameters such as postdetection integration length and the number of access channel message block repetitons. The uncertainty region of the reverse link spreading codes compared to that of forward link is very small, since the uncertainty region of the reverse link is determined by a cell radius. Thus, the parallel acquisiton technique in the reverse link is more efficient than a serial acquisition technique in terms of implementation and of acquisition time. The parallel acquisition is achieved by a bank of N parallel I/Q noncoherent correlator are analyzed for band-limited noise and the Rayleigh fast fading channel. The detection probability is derived for multiple correct code-phase offsets and multipath fading. The probability of no message error is derived when rake combining, access channel message block combining, and Viterbi decoding are applied. Numerical results provide the acquisition performance for system design parameters such as postdetection integration length and number of access channel message block repetitions in case of a random access on a mobile station.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.3
• /
• pp.107-113
• /
• 2011

An OFDMA(Orthogonal Frequency Division Multiple Access) includes a MIMO(Multi-Input Multi-Output) scheme for improving spectral efficiency and data throughput. Recognizing that the performance of MIMO system is heavily dependent upon the accuracy of channel estimation, we propose a novel channel estimation for the MIMO scheme based on OFDMA. Conventional interpolation-based channel estimation suffers from poor estimation error at specific subcarriers. Proposed scheme makes use of a planar interpolation instead of linear interpolation for those subcarriers of bad accuracy. Simulation results show that the proposed scheme improves the performance of MIMO system by improving the accuracy in channel estimation especially for the adverse subcarrier positions. It is observed that the proposed scheme outperforms the conventional method by about 2dB in terms of both mean squared error and overall bit error rate with a reasonable computational complexity.

• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.229-232
• /
• 2007

This paper investigates on the use of constant-amplitude zero-autocorrelation (CAZAC) sequence for channel estimation in multiple-input multiple-output (MIMO) system over indoor wireless channel. Since the symbol-length of the conventional 4-phase CAZAC sequence is short, there is a limitation to use it for MIMO system in multipath environments. An algorithm which generates longer CAZAC sequences is proposed to overcome that problem. Flexible symbol-length of 4-phase CAZAC sequences can be made by the proposed algorithm. Therefore appropriate symbol-length of CAZAC sequences could be utilized as preambles in accordance with the number of transmit antennas and channel condition. The effect of the number of CAZAC sequences for channel estimation is presented in terms of mean square error (MSE).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1043-1053
• /
• 2012

In distributed video coding (DVC) systems, the complexity of encoders is greatly reduced by removing the motion estimation operations in encoders, since the correlation between frames is utilized in decoders. The transmission of parity bits is requested through the feedback channel, until the related errors are corrected to decode the Wyner-Ziv frames. The requirement to use the feedback channel limits the application of DVC systems. In this paper, we propose an efficient method to remove the feedback channel in DVC systems. First, a simple side information generation method is proposed to calculate the amount of parity bits in the encoder, and it is shown that the proposed method yields good performance with low complexity. Then, by calibrating the theoretical entropy with three parameters, we can calculate the amount of parity bits in the encoder and remove the feedback channel. Moreover, an adaptive method to determine quantization parameters for key frames is proposed. Extensive computer simulations show that the proposed method yields better performance than conventional methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9A
• /
• pp.844-855
• /
• 2006

The communication system using multiple antennas improves link reliability or system capacity using tx & rx diversity, spatial multiplexing, and beamforming technique with services and characteristics of channel environment. This system is sensitive to spatial channel environment. In case of diversity, the lower correlation among links as a LoS environment, the better performance is acquired. In practical channel environment, However, there is high correlation, and there is high performance difference between ideal case and practical case. On the contrary, in case of beamforming, the higher correlation among links, the better performance is acquired. If we use the spatial adaptive transmission technique with spatial channel characteristics, we can get the system that maintains minimum link reliability and guarantees the overall system performance. In this paper, we propose the adaptive transmission and reception technique which use diversity or beamforming technique with channel characteristics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9A
• /
• pp.673-678
• /
• 2009

This paper presents a feedback method for improving the system capacity of MU-MIMO system for downlink channel environments. In a typical conventional feedback method, CVQ, in order to enhance the channel capacity, not only the feedback load is increased but also the quantization of the channel vector is increased, because the channel parameter of each user has to be fed back after quantizing one of the pre-defined N-codebook vectors. In this paper, a novel feedback method is proposed which provides an improved system capacity by transferring the channel state information without increasing the feedback load. Performance of the proposed method is compared to the conventional CVQ method through computer simulations. The simulation results show that the proposed method with 3-bit feedback provides a system capacity comparable to the CVQ method of 6-bit feedback when the number of transmit antennas is 2.