• Journal of radiological science and technology
• /
• v.32 no.4
• /
• pp.453-460
• /
• 2009

The purpose of this study was to determine the dose distribution and image quality according to slice thickness and BC(beam collimation) in the gantry aperture. CT scans were performed with a 64-slice MDCT(Brilliance 64, Philips, Cleveland, USA) scanner. To determine the dose distribution according to BC, a ionization chamber was placed at isocenter and 5, 10, 15, 20, 25 and 30 cm positions from the isocenter in the 12, 3, 6 and 9 o'clock directions. The dose distribution for phantom scan was also measured using CT head and body dose phantom with five holes at the center of the phantom and the positions of the 12, 3, 6 and 9 o'clock directions. The image noise measurement for different BCs was performed using an AAPM CT phantom. Water-filled block of the phantom was moved by 5 cm or 10 cm to the 12 o'clock direction, and the image noise was measured at the center of the phantom, and the points of 12, 3, 6 and 9 o'clock direction respectively. Some points were placed beyond the scan field of view (SFOV), so that measurement was not possible at that points. The results are as follows: The CTDIw showed a larger decrease as the source goes farther from the iso-center or the BC became wider. The CTDIw depends on the BC width more than the number of the channel of a detector array. The value of CTDIW decreased with increasing BC, but the value decreased 16.6~31.9% in the head phantom scan in air scan and 51.0~64.5% in the body phantom scan. The value of the noise was 3.9~5.9 in the head and 5.3~7.4 in the body except for BC of $2{\times}0.5\;mm$, regardless of the degree of deviation from the iso-center. When a subject was located within the SFOV, the position did not significantly affect image quality even if the subject was out of the center.

• Journal of Chest Surgery
• /
• v.41 no.4
• /
• pp.405-416
• /
• 2008

Background: Spinal cord ischemic injury during thoracic and thoracoabdominal aortic surgeries remains a potentially devastating outcome despite using various methods of protection. Neuronal voltage-dependent sodium channel antagonists are known to provide neuroprotection in cerebral ischemic models. This study was designed to compare the neuroprotective effects of phenytoin with those of hypothermia in a rabbit model of spinal cord ischemia. Material and Method: Spinal cord ischemia was induced in New Zealand white rabbits by means of infrarenal aortic cross clamping for 25 minutes. Four groups of 8 animals each were studied. The control group and the hypothermia group received retrograde infusion of saline only ($22^{\circ}C$, 2 mL/min); the normothermic phenytoin group and the hypothermicphenytoin group received retrograde infusion of 100 mg of phenytoin at different rectal temperatures ($39^{\circ}C$ and $37^{\circ}C$, respectively) during the ischemic period. The neurologic function was assessed at 24 and 72 hours after the operation with using the modified Tarlov criteria. The spinal cords were harvested after the final neurologic examination for histopathological examination to objectively quantify the amount of neuronal damage. Result: No major adverse effects were observed with the retrograde phenytoin infusion during the aortic ischemic period. All the control rabbits became severely paraplegic, Both the phenytoin group and the hypothermia group had a better neurological status than did the control group (p < 0.05). The typical morphological changes that are characteristic of neuronal necrosis in the gray matter of the control animals were demonstrated by means of the histopathological examination, whereas phenytoin or hypothermia prevented or attenuated these necrotic phenomena (p < 0.05). The number of motor neuron cells positive for TUNEL staining was significantly reduced, to a similar extent, in the rabbits treated with phenytoin or hypothermia. Phenytoin and hypothermia had some additive neuroprotective effect, but there was no statistical significance between the two on the neurological and histopathological analysis. Conclusion: The neurological and histopathological analysis consistently demonstrated that both phenytoin and hypothermia may afford significant spinal cord protection to a similar extent during spinal cord ischemia in rabbits, although no significant additive effects were noticed.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.7 no.1
• /
• pp.20-31
• /
• 2002

This study was carried out to investigate the composition and the distribution of the benthic polychaetous communities in Deugryang Bay, semi-enclosed bays, on the southern coast of Korea and to deduce temporal changes in community with the comparison of the past studies. In Deugryang Bay, benthic polychaetous community structure was investigated on the base of the samples from 98 stations in 1996 and 1997. The main facies of surface sediment was clayey silt. The overall benthic macrofaunal density was 871 ind./m$^{2}$. The density was highest in the middle part of the bay because Musculus senhousia (Bivalvia) and cumaceans (Crustacea) had their highest densities in some stations. Benthic polychaetes were comprised of 100 species with a mean density of 138 ind./m$^{2}$. Their abundances were higher in the inner bay, in the middle bay, and in the mouth of bay, but poor community structures were established in the whole bay. The dominant species over 1.0 percentage were composed of the total 21 species, and they occupied 78.3% of the total abundance of the benthic polychaetes. The most dominant species was Lumbrineris longifolia (9.3%), followed by Eteone longa (7.3%), Heteromastus filifomis (7.1%), Sternaspis scutata (6.1%). From the cluster analysis, the study area could be divided into three station groups. Station group AI was located in the inner bay and in the shallow coastal region, and its most dominant species was Heteromastus filiformis. At the station group AII in the mouth of bay and in some channel region, its most dominant species were Lumbrineris longifolia and Eteone longa. And at the station group B located in middle part of the bay, the most dominant specis was Sternaspis scutata. In comparison with previous studies, the benthic polychaetous community experienced great change in the view of species number, density and dominant species. The dominant species were Sternaspis scutata and Eteone longa, but their densities declined greatly. Instead of these species, Lumbrineris longifolia and Heteromastus filiformis, known as the potential organic enrichment indicator species, appeared to the new dominant species even if their low densities. These facts mean that Deugryang Bay was maintained yet as little organic enriched area compared to other bays on the coast of Korea, but needed some caution of marine environmental management.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4A
• /
• pp.332-340
• /
• 2010

In this paper, we deal with multi-user diversity scheduling methods that transmit simultaneously signals from multiple users using superposition coding multiplexing. These methods can make various scheduling methods be obtained, according to strategies for user selection priority from the first user to the first-following users, strategies for per-user power allocation, and resulting combining strategies. For the first user selection, we consider three strategies such as 1) higher priority for a user with a better channel state, 2) following the proportional fair scheduling (PFS) priority, 3) higher priority for a user with a lower average serving rate. For selection of the first-following users, we consider the identical strategies for the first user selection. However, in the second strategy, we can decide user priorities according to the original PFS ordering, or only once an additional user for power allocation according to the PFS criterion by considering a residual power and inter-user interference. In the strategies for power allocation, we consider two strategies as follows. In the first strategy, it allocates a power to provide a permissible per-user maximum rate. In the second strategy, it allocates a power to provide a required per-user minimum rate, and then it reallocates the residual power to respective users with a rate greater than the required minimum and less than the permissible maximum. We consider three directions for scheduling such as maximizing the sum rate, maximizing the fairness, and maximizing the sum rate while maintaining the PFS fairness. We select the max CIR, max-min fair, and PF scheduling methods as their corresponding reference methods [1 and references therein], and then we choose candidate scheduling methods which performances are similar to or better than those of the corresponding reference methods in terms of the sum rate or the fairness while being better than their corresponding performances in terms of the alternative metric (fairness or sum rate). Through computer simulations, we evaluate the sum rate and Jain’s fairness index (JFI) performances of various scheduling methods according to the number of users.

• Radiation Oncology Journal
• /
• v.28 no.4
• /
• pp.238-248
• /
• 2010

Purpose: To compare the dose distributions between three-dimensional (3D) and four-dimensional (4D) radiation treatment plans calculated by Ray-tracing or the Monte Carlo algorithm, and to highlight the difference of dose calculation between two algorithms for lung heterogeneity correction in lung cancers. Materials and Methods: Prospectively gated 4D CTs in seven patients were obtained with a Brilliance CT64-Channel scanner along with a respiratory bellows gating device. After 4D treatment planning with the Ray Tracing algorithm in Multiplan 3.5.1, a CyberKnife stereotactic radiotherapy planning system, 3D Ray Tracing, 3D and 4D Monte Carlo dose calculations were performed under the same beam conditions (same number, directions, monitor units of beams). The 3D plan was performed in a primary CT image setting corresponding to middle phase expiration (50%). Relative dose coverage, D95 of gross tumor volume and planning target volume, maximum doses of tumor, and the spinal cord were compared for each plan, taking into consideration the tumor location. Results: According to the Monte Carlo calculations, mean tumor volume coverage of the 4D plans was 4.4% higher than the 3D plans when tumors were located in the lower lobes of the lung, but were 4.6% lower when tumors were located in the upper lobes of the lung. Similarly, the D95 of 4D plans was 4.8% higher than 3D plans when tumors were located in the lower lobes of lung, but was 1.7% lower when tumors were located in the upper lobes of lung. This tendency was also observed at the maximum dose of the spinal cord. Lastly, a 30% reduction in the PTV volume coverage was observed for the Monte Carlo calculation compared with the Ray-tracing calculation. Conclusion: 3D and 4D robotic radiotherapy treatment plans for lung cancers were compared according to a dosimetric viewpoint for a tumor and the spinal cord. The difference of tumor dose distributions between 3D and 4D treatment plans was only significant when large tumor movement and deformation was suspected. Therefore, 4D treatment planning is only necessary for large tumor motion and deformation. However, a Monte Carlo calculation is always necessary, independent of tumor motion in the lung.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.91-93
• /
• 2003

A comprehensive numerical study is carried out to investigate for the understanding of the flow evolution and flame development in a supersonic combustor with normal injection of ncumally injecting hydrogen in airsupersonic flows. The formulation treats the complete conservation equations of mass, momentum, energy, and species concentration for a multi-component chemically reacting system. For the numerical simulation of supersonic combustion, multi-species Navier-Stokes equations and detailed chemistry of H2-Air is considered. It also accommodates a finite-rate chemical kinetics mechanism of hydrogen-air combustion GRI-Mech. 2.11[1], which consists of nine species and twenty-five reaction steps. Turbulence closure is achieved by means of a k-two-equation model (2). The governing equations are spatially discretized using a finite-volume approach, and temporally integrated by means of a second-order accurate implicit scheme (3-5).The supersonic combustor consists of a flat channel of 10 cm height and a fuel-injection slit of 0.1 cm width located at 10 cm downstream of the inlet. A cavity of 5 cm height and 20 cm width is installed at 15 cm downstream of the injection slit. A total of 936160 grids are used for the main-combustor flow passage, and 159161 grids for the cavity. The grids are clustered in the flow direction near the fuel injector and cavity, as well as in the vertical direction near the bottom wall. The no-slip and adiabatic conditions are assumed throughout the entire wall boundary. As a specific example, the inflow Mach number is assumed to be 3, and the temperature and pressure are 600 K and 0.1 MPa, respectively. Gaseous hydrogen at a temperature of 151.5 K is injected normal to the wall from a choked injector.A series of calculations were carried out by varying the fuel injection pressure from 0.5 to 1.5MPa. This amounts to changing the fuel mass flow rate or the overall equivalence ratio for different operating regimes. Figure 1 shows the instantaneous temperature fields in the supersonic combustor at four different conditions. The dark blue region represents the hot burned gases. At the fuel injection pressure of 0.5 MPa, the flame is stably anchored, but the flow field exhibits a high-amplitude oscillation. At the fuel injection pressure of 1.0 MPa, the Mach reflection occurs ahead of the injector. The interaction between the incoming air and the injection flow becomes much more complex, and the fuel/air mixing is strongly enhanced. The Mach reflection oscillates and results in a strong fluctuation in the combustor wall pressure. At the fuel injection pressure of 1.5MPa, the flow inside the combustor becomes nearly choked and the Mach reflection is displaced forward. The leading shock wave moves slowly toward the inlet, and eventually causes the combustor-upstart due to the thermal choking. The cavity appears to play a secondary role in driving the flow unsteadiness, in spite of its influence on the fuel/air mixing and flame evolution. Further investigation is necessary on this issue. The present study features detailed resolution of the flow and flame dynamics in the combustor, which was not typically available in most of the previous works. In particular, the oscillatory flow characteristics are captured at a scale sufficient to identify the underlying physical mechanisms. Much of the flow unsteadiness is not related to the cavity, but rather to the intrinsic unsteadiness in the flowfield, as also shown experimentally by Ben-Yakar et al. [6], The interactions between the unsteady flow and flame evolution may cause a large excursion of flow oscillation. The work appears to be the first of its kind in the numerical study of combustion oscillations in a supersonic combustor, although a similar phenomenon was previously reported experimentally. A more comprehensive discussion will be given in the final paper presented at the colloquium.

• Journal of Intelligence and Information Systems
• /
• v.22 no.4
• /
• pp.123-138
• /
• 2016

This study investigates intents of acquisitions in information technology industries. Mergers and acquisitions are a strategic decision at corporate-level and have been an important tool for a firm to grow. Plenty of firms in information technology industries have acquired startups to increase production efficiency, expand customer base, or improve quality over the last decades. For example, Google has made about 200 acquisitions since 2001, Cisco has acquired about 210 firms since 1993, Oracle has made about 125 acquisitions since 1994, and Microsoft has acquired about 200 firms since 1987. Although there have been many existing papers that theoretically study intents or motivations of acquisitions, there are limited papers that empirically investigate them mainly because it is challenging to measure and quantify intents of M&As. This study examines the intent of acquisitions by measuring specific intents for M&A transactions. Using our measures of acquisition intents, we compare the intents by four acquisition types: (1) the acquisition where a hardware firm acquires a hardware firm, (2) the acquisition where a hardware firm acquires a software/IT service firm, (3) the acquisition where a software/IT service firm acquires a hardware firm, and (4) the acquisition where a software /IT service firm acquires a software/IT service firm. We presume that there are difference in reasons why a hardware firm acquires another hardware firm, why a hardware firm acquires a software firm, why a software/IT service firm acquires a hardware firm, and why a software/IT service firm acquires another software/IT service firm. Using data of the M&As in US IT industries, we identified major intents of the M&As. The acquisition intents are identified based on the press release of M&A announcements and measured with four categories. First, an acquirer may have intents of cost saving in operations by sharing common resources between the acquirer and the target. The cost saving can accrue from economies of scope and scale. Second, an acquirer may have intents of product enhancement/development. Knowledge and skills transferred from the target may enable the acquirer to enhance the product quality or to expand product lines. Third, an acquirer may have intents of gain additional customer base to expand the market, to penetrate the market, or to enter a foreign market. Fourth, a firm may acquire a target with intents of expanding customer channels. By complementing existing channel to the customer, the firm can increase its revenue. Our results show that acquirers have had intents of cost saving more in acquisitions between hardware companies than in acquisitions between software companies. Hardware firms are more likely to acquire with intents of product enhancement or development than software firms. Overall, the intent of product enhancement/development is the most frequent intent in all of the four acquisition types, and the intent of customer base expansion is the second. We also analyze our data with the classification of production-side intents and customer-side intents, which is based on activities of the value chain of a firm. Intents of cost saving operations and those of product enhancement/development can be viewed as production-side intents and intents of customer base expansion and those of expanding customer channels can be viewed as customer-side intents. Our analysis shows that the ratio between the number of customer-side intents and that of production-side intents is higher in acquisitions where a software firm is an acquirer than in the acquisitions where a hardware firm is an acquirer. This study can contribute to IS literature. First, this study provides insights in understanding M&As in IT industries by answering for question of why an IT firm intends to another IT firm. Second, this study also provides distribution of acquisition intents for acquisition types.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.239-246
• /
• 2017

There are various transversal structures (small dams or drop structures) in median and small streams in Korea. Most of them are concrete structures and it is so hard to exclude low-level water. Unless drainage valves and/or gates would not be installed near bottom of bed, sediment from upstream should be deposited and also contaminants attached to the sediments would devastatingly threaten the water quality and ecosystem. One of countermeasures for such problem is the bypass pipe installed underneath the transversal structure. However, there is still issued whether it would be workable if the gravels and/or stones would roll into and be not excluded. Therefore, in this study, the conditions to exclude the rip stone which enter into the bypass pipe was reviewed. Based on sediment transport phenomenon, the behavior of stones was investigated with the concepts from the critical shear stress of sediment and d'Alembert principle. As final results, the basis condition (${\tau}_c{^*}$) was derived using the Lagrangian description since the stones are in the moving state, not in the stationary state. From hydraulic experiments the relative velocity could be obtained. In order to minimize the scale effect, the extra wide channel of 5.0 m wide and 1.0 m high was constructed and the experimental stones were fully spherical ones. Experimental results showed that the ratio of flow velocity to spherical particle velocity was measured between 0.5 and 0.7, and this result was substituted into the suggested equation to identify the critical condition wether the stones were excluded. Regimes about the exclusion of stone in bypass pipe were divided into three types according to particle Reynolds number ($Re_p$) and dimensionless critical shear force (${\tau}_c{^*}$) - exclusion section, probabilistic exclusion section, no exclusion section. Results from this study would be useful and essential information for bypass pipe design in transveral structures.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Korea journal of population studies
• /
• v.4 no.1
• /
• pp.105-130
• /
• 1981

This study was conducted to compare the characteristics of high performane areas for family planning with that of low performance areas and to find factors which strongly affected contraceptive practice behavior. For the study, eight areas were selected from 274 rural family planning canvassing areas of Korean Population Policy and Program Evaluation Study, which was an action study operated in all areas of Cheju Island from July 1, 1976 until December 31,1979. As a first step of the action study, Cheju Island was devided up 318 family planning canvasser areas Each area was consisted of 200 households in rural district and 300 households in urhan one Duriog the period of project, each canvassing area had been managed by a female family planning canvasser, selected by director of health center considering several individual conditions needed for family planning activities Basic activities of canvassers were to counsell all the eligihie couples in own charged area about family planning methods and also to distribute contraceptives such as condoms and oral pills. In case couples desire to accept sterilization including vasectomy and tubal-ligation, the canvassers played a linking role connecting potential client with family planning field workers. Canvassng areas shows significant differentce in performance for family planning, nevertheless they are supposed to have almost the same conditions regarding family planning distribution channel. Because the purpose of the Cheju project was to eliminate all the problems that existed in governmental distribution system, that is to remove geographic, economic, cognitive and administrative barriers Accumulated performances of family planning methods accepted by residents in each area were calculated by eligible women aged 14-49. And then canvassing areas were ranked according to performance score. Consequently, 4 areas in extremely high and low family planning performance areas were selected respectively. Major results were obtained by comparing characteristics of high performance area with that of low performance areas, which are as follows: 1. The mean number of living children was about the same both in high and low performance areas for family planning. But respondents' mean age (38.5) in high performance areas was higher than that (37.0) in low performance areas 2. Respondents' perception in the expectant educational level of others' children in high performance areas was higher than that in low performance areas, although respondents educational level, monthly expenditure and ratio of children in high school and above was not different. 3. Ratio of ownerships of TV and newspaper in high performance areas was highen than that in low performance areas 4. The duration of canvasser' charge in high performance areas was longer than that of low performance areas, showing the fact that canvassers didn't move cut in high performance areas 5. In high performance areas, canvassers' houses were relatively located in the center part of the village. And so villagers resided in near distances from the anvasser's house 6. 4H clubs' activities in high performance areas were more active than those in low performance areas Therefore it was assumed that cohesiveness of community in high performance areas were stronger than that in low areas. 7. Canvassers' family planning practice rate was higher than that in low performance areas, and also canvassers' human relationship was more sociable than that of canvassers in low performance areas. 8. Fourteen variables which showed relatively high significance level in $X^2$ and F test were selected as independent variables for stepwise regression analysis. According to the results of regression analysis. five of 14 variables-distributors education level ($R^2$=.4439), duration of distributor's charge ($R^2$=.6166), 4H club activities ($R^2$=.6697), canvasser's contraceptive practice ($R^2$=.7377) and location of distributions house ($R^2$=.8010) explained 80.1 percent of total variance.