• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권4호
• /
• pp.989-1005
• /
• 2012

In this paper, throughput of IEEE 802.11 carrier-sense multiple access (CSMA) with collision-avoidance (CA) protocols in non-saturated traffic conditions is presented taking into account the impact of imperfect channel sensing. The imperfect channel sensing includes both missed-detection and false alarm and their impact on the utilization of IEEE 802.11 analyzed and expressed as a closed form. To include the imperfect channel sensing at the physical layer, we modified the state transition probabilities of well-known two state Markov process model. Simulation results closely match the theoretical expressions confirming the effectiveness of the proposed model. Based on both theoretical and simulated results, the choice of the best probability detection while maintaining probability of false alarm is less than 0.5 is a key factor for maximizing utilization of IEEE 802.11.

• Journal of Communications and Networks
• /
• 제9권4호
• /
• pp.466-472
• /
• 2007

Single carrier block transmission with frequency domain equalization(SC-FDE) has been shown to be a promising candidate in ultra-wideband(UWB) communications. In this paper, we analyze the performance of SC-FDE over UWB communications with channel estimation error. The probability density functions of the frequency domain minimum mean-squared error(MMSE) equalizer taps are derived in closed form. The error probabilities of single carrier block transmission with frequency domain MMSE equalization under imperfect channel estimation are presented and evaluated numerically. Compared with the simulation results, our semi-analytical analysis yields fairly accurate bit error rate performance, thus validating the use of the Gaussian approximation method in the performance analysis of the SC-FDE system with channel estimation error.

• International Journal of Advanced Culture Technology
• /
• 제9권4호
• /
• pp.307-314
• /
• 2021

Recently, positively asymmetric binary pulse amplitude modulation (2PAM) has been proposed to improve the bit error rate (BER) performance of the weak channel gain user, with a tolerable BER loss of the strong channel gain user, for non-orthogonal multiple access (NOMA). However, the BER loss of the stronger channel gain user is inevitable in such positively asymmetric 2PAM NOMA scheme. Thus, we propose the negatively asymmetric 2PAM NOMA scheme. First, we derive closed-form expressions for the BERs of the negatively asymmetric 2PAM NOMA. Then, simulations demonstrate that for the stronger channel gain user, the BER of the proposed negatively asymmetric 2PAM NOMA improves, compared to that of the conventional positively asymmetric 2PAM NOMA. Moreover, we also show that for the weaker channel gain user, the BER of the proposed negatively asymmetric 2PAM NOMA is comparable to that of the conventional positively asymmetric 2PAM NOMA, over the power allocation range less than about 10 %.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2291-2296
• /
• 2007

Thermal transport from vertical heated surface to falling liquid film in a channel has been investigated experimentally. Air-flow is introduced into channel to make a counter flow against falling liquid film. This problem is of particular interest in the design of direct contact heat exchange system, such as cooling tower, evaporative cooling system, absorption cooling system, and distillation system. The effects of channel width and air flow rate on the heat transfer to falling liquid film are studied in detail. The results obtained indicate that heat transfer rate is gradually decreased with an increase in the channel width without air flow as well as with air flow in a channel. It is also found that heat transfer rate of air-flow is increased while heat transfer rate of falling liquid film is decreased with an increase in the air flow rate at a given channel width. However, total heat transfer rate form the heated surface is increased as the air flow rate is increased.

• 대한의용생체공학회:의공학회지
• /
• 제36권5호
• /
• pp.221-227
• /
• 2015

In this study, Multi-Array Electrodes (MAE) and Programmable Multi-channel Electrical Stimulator (PMES) were implemented for firing Trigger Points (TPs) of the patient with Myofascial Pain Syndrome (MPS). MAE has 25 Ag/AgCl electrodes arranged in the form of array ($5{\times}5$) fabricated with flexible pad, which are applicable to be easy-attached to curved specific region of the human body. PMES consisted of 25 channels. Each channel was to generate various electric stimulus patterns (ESPs) by changing the mono-phasic or bi-phasic of ESP, On/Off duration of ESP, the interval between ESP, and amplitude of ESP. PMES hardware was composed of Host PC, Stimulation Pattern Editing Program (SPEP), and Multi-channel Electrical Stimulator (MES). Experiments were performed using MAE and PMES as the following. First experiment was performed to evaluate the function for each channel of Sub- Micro Controller Unit (SMCU) in MES. Second experiment was conducted on whether ESP applied from each channel of SMCU in PMES was focused to the electrode set to the ground, after applying ESP being output from each channel of SMCU in PMES to MAE.

• 대한전자공학회논문지
• /
• 제25권11호
• /
• pp.1286-1293
• /
• 1988

자기정렬 DMOS 트랜지스터의 채널 길이에 관한 수식을 2차원적인 Caussian 농도분포식으로부터 유도하였다. 본 논문에서는 제시된 채널 길이에 관한 수식은 기판의 농도, 이중확산된 각 영역의 표면 농도와 수직 접합 깊이의 함수로 이루어져 있으며, 계산된 실험치와 잘 일치하고 있다. 또한 고전압용 DMOS 트랜지스터에서 채널 punchthrough를 억제할 수 있는 최소 채널 길이를 채널영역의 평균농도를 이용하여 계산하였으며 소자 simulation을 통하여 최적의 채널 조건(채널농도분포 및 채널 길이)를 예측할 수 있음을 확인하였다.

• 한국인터넷방송통신학회논문지
• /
• 제10권4호
• /
• pp.145-150
• /
• 2010

본 논문에서는 스펙트럼 효율 향상을 위한 부가 데이터 전송 시스템을 제안하고 채널용량 식을 근사화 하여 유도 한다. 대역확산 워터마킹 기법이 워터마킹 신호 삽입기로 이용되었고 다중경로 채널로는 나카가미-q (Hoyt) 모델을 고려하였다. 수식적 결과는 무선 페이딩 채널에서 제안된 시스템의 채널 용량 변화를 보여준다. 결과로부터 워터마킹 시스템의 채널용량이 페이딩 계수와 호스트 샘플링 주파수, 호스트-워터마킹 전력비, 워터마킹-잡음 전력비 및 확산코드 길이에 의해서 영향 받음을 확인한다.

• 한국컴퓨터정보학회논문지
• /
• 제22권6호
• /
• pp.17-24
• /
• 2017

In recent digital broadcasting, up to 250 channels are multiplexed and transmitted. The channel transmission is made in the form of MPEG-2 Transport Stream (TS) and transmits one channel (Video, Audio). In order to check if many broadcast channels are transmitted normally, in multi-channel multi-view system, ability of real-time monitoring is required. In order to monitor efficient multi-channel, a distributed system in which functions and load are distributed should be implemented. In the past, we used an inefficient system that gave all of the functionality to a piece of hardware, which limited the channel acceptance and required a lot of resources. In this paper, we implemented a distributed multi-view system which can reduce resources and monitor them economically through efficient function and load balancing. It is able to implement efficient system by taking charge of decoding, resizing and encoding function in specific server and viewer function in separate server. Through this system, the system was stabilized, the investment cost was reduced by 19.7%, and the wall monitor area was reduced by 52.6%. Experimental results show that efficient real-time channel monitoring for multi-channel digital broadcasting is possible.

• 수산해양기술연구
• /
• 제44권1호
• /
• pp.68-74
• /
• 2008

This study is concerned with the development of the basic planing hull form of small fishing boat in 25 knots high speed. A series of model test to determine the optimum performance hull form of actual fishing boat with 10 gross tonnage was carried out for 5 models made available planing hull form in the circulation water channel. Model test was performed with the resistance test to study the hydrodynamic characteristics of model ships and the sinkage and trim measurement to investigate the stability of model ships and also the wave pattern observation to analyze the effectiveness of model ships. As the result, the planing hull form of P-4 with deep V type bow can be derived as the best hull form with good performance especially in ship's resistance efficiency showing less residual resistance and sinkage and trim and the spray effect, etc..

• 한국ITS학회 논문지
• /
• 제9권2호
• /
• pp.68-74
• /
• 2010

본 논문에서는 다중경로 채널 모델로써 일반적으로 사용되는 Rayleigh 페이딩 채널과 Rician 페이딩 채널에서 SSW 시스템의 채널용량을 분석하고 모의실험을 수행하였다. ITS 시스템에 SSW 기법을 적용하면 주파수 효율을 증가시킬 수 있고, 기존의 정보 외에 부가적인 정보를 워터마킹 기법을 통하여 전송 가능하다. SSW 기법을 적용하기 위해서는 기존 시스템에 최소한의 영향을 주면서 얼마만큼의 데이터를 신뢰할 만한 수준으로 전송 가능할 것인지에 대한 채널용량 분석이 필수적으로 요구된다. 이를 위해서 Rayleigh와 Rician 페이딩 채널에서 근사화된 채널용량 수식을 정보이론 관점에서 유도하였고, 분석 결과 이론적으로 유도한 수식과 실험 결과가 거의 일치함을 보였다.