• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.348-348
• /
• 2011

Carbon nanotube (CNT) field effect transistors and sensors use CNT as a current channel, of which the resistance varies with the gate voltage or upon molecule adsorption. Since the performance of CNT devices depends very much on the CNT/metal contact resistance, the CNT/electrode contact must be stable and the contact resistance must be small. Depending on the geometry of CNT/electrode contact, it can be categorized into the end-contact, embedded-contact (top-contact), and side-contact (bottom-contact). Because of difficulties in the sample preparation, the end-contact CNT device is seldom practiced. The embedded-contact in which CNT is embedded inside the electrode is desirable due to its rigidness and the low contact resistance. Fabrication of this structure is complicated, however, because each CNT has to be located under a high-resolution microscope and then the electrode is patterned by electron beam lithography. The side-contact is done by depositing CNT electrophoretically or by precipitating on the patterned electrode. Although this contact is fragile and the contact resistance is relatively high, the side-contact by far has been widely practiced because of its simple fabrication process. Here we introduce a simple method to embed CNT inside the electrode while taking advantage of the bottom-contact process. The idea is to utilize a eutectic material as an electrode, which melts at low temperature so that CNT is not damaged while annealing to melt the electrode to embed CNT. The lowering of CNT/Au contact resistance upon annealing at mild temperature has been reported, but the electrode in these studies did not melt and CNT laid on the surface of electrode even after annealing. In our experiment, we used a eutectic Au/Al film that melts at 250$^{\circ}C$. After depositing CNT on the electrode made of an Au/Al thin film, we annealed the sample at 250$^{\circ}C$ in air to induce eutectic melting. As a result, Au-Al alloy grains formed, under which the CNT was embedded to produce a rigid and low resistance contact. The embedded CNT contact was as strong as to tolerate the ultrasonic agitation for 90 s and the current-voltage measurement indicated that the contact resistance was lowered by a factor of 4. By performing standard fabrication process on this CNT-deposited substrate to add another pair of electrodes bridged by CNT in perpendicular direction, we could fabricate a CNT cross junction. Finally, we could conclude that the eutectic alloy electrode is valid for CNT sensors by examine the detection of Au ion which is spontaneously reduced to CNT surface. The device sustatined strong washing process and maintained its detection ability.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.4
• /
• pp.207-218
• /
• 2013

This study is based on a series of numerical modeling experiments to understand the circulation and its change in the Chunsu Bay (CSB), Yellow Sea of Korea. A skill analysis was performed for the tidal height and tidal current of the observation data using the amplitude and phase of the 4 major tidal constituents respectively for verification of modeling experimental results. As a result, most of the skill score was seen to be over 90%, so numerical model experiment results can be said to be in good agreement with the observed tidal height and tidal current. Tidal wave proceeded from the entrance of the CSB towards inside, and the tidal range gradually increased to the north. It took about 10 to 30 minutes for the tidal wave to reach to northern end. The tidal wave showed a characteristic to rotate counter-clockwise in the southern part. The tidal current flowed to the north-south direction along the bottom topography; the angle of the major axis appeared alongside the isobath. It showed the characteristics of reversing tidal current with the minor axis less than 10% of the major axis. The strength of the tidal residual current that is influenced by geographical factors including bathymetry and coastline showed the range of 1~30 cm/sec, greater in the south channel and smaller in northern Bay. Two pairs of cyclonic/anti-cyclonic eddies around Jukdo and 3~4 pairs of strong eddies at the southern part of CSB in hundreds of m to a few km size by relative vorticity derived from the tidal residual current.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.6
• /
• pp.736-745
• /
• 2002

In network delivery of compressed video, packets may be lost if the channel is unreliable like Internet. Such losses tend to of cur in burst like continuous bit-stream error. In this paper, we propose an effective error-concealment approach to which an error resilient video encoding approach is applied against burst errors and which reduces a complexity of error concealment at the decoder using data hiding. To improve the performance of error concealment, a temporal and spatial error resilient video encoding approach at encoder is developed to be robust against burst errors. For spatial area of error concealment, block shuffling scheme is introduced to isolate erroneous blocks caused by packet losses. For temporal area of error concealment, we embed parity bits in content data for motion vectors between intra frames or continuous inter frames and recovery loss packet with it at decoder after transmission While error concealment is performed on error blocks of video data at decoder, it is computationally costly to interpolate error video block using neighboring information. So, in this paper, a set of feature are extracted at the encoder and embedded imperceptibly into the original media. If some part of the media data is damaged during transmission, the embedded features can be extracted and used for recovery of lost data with bi-direction interpolation. The use of data hiding leads to reduced complexity at the decoder. Experimental results suggest that our approach can achieve a reasonable quality for packet loss up to 30% over a wide range of video materials.

• Journal of Christian Education in Korea
• /
• v.62
• /
• pp.43-74
• /
• 2020

This paper examines the epistemology of the body and the direction of Christian education based on it. Looking at Merleau-Ponty, Damagio, and Nelson's epistemology of the body, it found that they had a common point, even though they studied in different areas like philosophy, brain science, and body theology; the body is a subject that perceives the world in a sensuous and direct way, and is a channel that mediates humans and the world, and plays a decisive role in human self-formation. In particular, theology of body revealed, that the body is a pathway for our understanding of God just as a pathway for our understanding the world. In addition, theology of body revealed that the body is regarded as the place of 'embodiment of God', and in the end, the world in which our incarnated body participates should also become the place of 'God's incarnation'. It also examined Christian education based on the epistemology of the body, focusing on 'education starting from the senses', 'education as a participation', and 'incarnational education'. From these three concepts, it found that epistemology of body suggests an alternative view of traditional knowledge-based education or schooling education. It suggests an open paradigm centered on sense and experience, personal participation, non-verbal experience, and field of education, beyond a fixed and closed paradigm of doctrine-centered, objective knowledge mediation, language-centered, and content-centered. Furthermore, this paper found that the body is like a well that can pump up metaphors that provide a basic metaphor for re-conceptualizing Christian education.

• Korean Journal of Digital Imaging in Medicine
• /
• v.16 no.1
• /
• pp.43-47
• /
• 2014

Sens of insecutity of the public and professionals about harmful effects of radiation is increasing in an accident at the Chernobyl and Fkushima nuclear power plant.Anxiety was amplified to lack of information about radiation majority of people. To target the middle and high school in the region of Daegu and Gyeongsangbuk-do, to investigate the radiation recognition of the next generation, it is intended to present a model of education for the safe use of radiation. The High School of the six metropolitan cities, city, town through the questionnaire and needs to be educational experience of radiation and use knowledge level of radiation, experience in daily life, understanding of man-made radiation and natural radiation, information channel on radiation, the radiation Distribute the total 800 parts of, to recover the 629 unit, was analyzed for 155 females 474 males. Many people 75.36% of the people, to 24.64% female subjects of this investigation, was constant, respectively from 13 to 18 years age. It is a large number and 30.37% of the respondents as "normal" level of knowledge of radiation, for the type of radiation, most knew. You have answer for risk experience of the medical radiation was higher, touching a lot of information via the broadcast medium in general, and the accuracy is low. I thought we wanted to be educated three or more twice a year, as an educator,about 71.37% and radiation-related understanding of knowledge and background in accordance with the diversification of information channels, the regional differences between urban and rural areas. But I considered the difference age (grade) for each is displayed, intended for junior high school students, the target surface and use the occurrence of radiation, high school students, the need for education about risk and application of radiation through this study.

• Korean Journal of Agricultural Science
• /
• v.20 no.1
• /
• pp.88-101
• /
• 1993

This study is aimed at evaluating the present management status of the rural special production area development projects and identifying managerial problems to propose new direction of the political countermeasures for the projects. In the con text of implementing the five year's economic developent plans for the past three decades, agricultural production and farm-household income have also been grown rapidly. However the income gap between rural and urbarn laborer, as an internal problem, has widened during the decades and the UR problems concerning free trade of agricultural products, as an external problems, are now agonizing the small-holder farm economy in Korea. The internal and external farm problems could be solved through improvement of agricultural structure and provision of off-farm jobs for farm household income increase. As a part of the off-farm income sources, the rural special production area development projects have propelled by the government throughout the country. The main problems to be solved for the successful implementation of the projects are as follows : 1. Present loan amount by the financial fund was estimated at 6-7% of the total installation costs required. To expand and implement the project successfully, enough financial credit support with favorable terms and conditions have to be considered by the government. 2. The operation patterns of the special production area development project should be recommended from the view point of cooperative and private operation to maximize farm household incomes including profits, marketing charges and dividens. 3. Improvement of the marketing channel of the products and marketing information through TV program and other mass communication should be implemented strongly to promote marketsales by the financial supports of the government. 4. In connection with the off-farm income increase, the population migrating to urban area in outside Chungnam province equivalent to 10-12 thousand persons with age of 20-49 years should be taken into account politically to be employed in the projects in the province. 5. Surplus farm labors should be created by means of improvement of agricultural structure including large farm management with farm mechanization and job opportunities have also to be provided in connection with the rural special production area development projects. The two imminent subjects are the prerequisites to increase off-farm incomes for the farmers living in Chungnam province. 6. Required credit supports for investment and operation costs of the projects should be taken actions by the government.

• Molecules and Cells
• /
• v.20 no.2
• /
• pp.235-240
• /
• 2005

Extracts of pine needles (Pinus densiflora Sieb. et Zucc.) have diverse physiological and pharmacological actions. In this study we show that pine needle extract alters pacemaker currents in interstitial cells of Cajal (ICC) by modulating ATP-sensitive $K^+$ channels and that this effect is mediated by prostaglandins. In whole cell patches at $30^{\circ}C$, ICC generated spontaneous pacemaker potentials in the current clamp mode (I = 0), and inward currents (pacemaker currents) in the voltage clamp mode at a holding potential of -70 mV. Pine needle extract hyperpolarized the membrane potential, and in voltage clamp mode decreased both the frequency and amplitude of the pacemaker currents, and increased the resting currents in the outward direction. It also inhibited the pacemaker currents in a dose-dependent manner. Because the effects of pine needle extract on pacemaker currents were the same as those of pinacidil (an ATP-sensitive $K^+$ channel opener) we tested the effect of glibenclamide (an ATP-sensitive $K^+$ channels blocker) on ICC exposed to pine needle extract. The effects of pine needle extract on pacemaker currents were blocked by glibenclamide. To see whether production of prostaglandins (PGs) is involved in the inhibitory effect of pine needle extract on pacemaker currents, we tested the effects of naproxen, a non-selective cyclooxygenase (COX-1 and COX-2) inhibitor, and AH6809, a prostaglandin EP1 and EP2 receptor antagonist. Naproxen and AH6809 blocked the inhibitory effects of pine needle extract on ICC. These results indicate that pine needle extract inhibits the pacemaker currents of ICC by activating ATP-sensitive $K^+$ channels via the production of PGs.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.31-41
• /
• 2006

The primary purpose of a TKA is to restore normal knee function Therefore, ideally, a TKA should: (a) maintain the natural leverage of the knee joint muscles to ensure generating adequate knee muscle moments to accomplish daily tasks such as rising from climbing stairs; (b) provide adequate knee joint stability. A 16-channel MyoResearch XP EMG system was used to collect the differential input surface electromyography signals VM, VL, RF, BF, ST during climbing/descending stair tests. A Peak Motion Measurement System was used to collect the kinematic and kinetic data. AKIN-COM Ill isokinetic dynamometer was used for EMG of VM, VL, RF, BF and ST during maximal voluntary contraction. I Quadriceps EMG results for the VM of the passed 1year group limb demonstrated significant less RMS EMG than that of the passed 3year group limb $60^{\circ}-15^{\circ}$ of knee flexion(p<0.05). The VL of the passed 1year group limb also demonstrated significants less RMS EMG than that of the passed 3year group limb from $60^{\circ}-45^{\circ}$ of knee flexion(p<0.05). Similar to the VM and VL, the RF of the passed 1year group limb showed less RMS EMG than that of the passed 3year group limb from $60^{\circ}-30^{\circ}$ do knee flexion(p<0.05). Hamstring EMG results for the BF of the passed 1year group limb demonstrated less RMS EMG than that of the passed 3year group limb from $75^{\circ}-15^{\circ}$ of knee flexion(p<0.05). The passed 1year group limb tended to have less ADD displacement(p<0.071) than that of the passed 3year group limb. There was no significant difference of the ABD displacement between the passed 1year group and the passed 3year group limbs(p<0.73). The passed 3year group used compensatory adaptation movement strategies to compensate for the strength deficit of passed 3year group limbs. The passed 3year group limb also increased the quadriceps muscle activation level to produce more knee extension moment to compensate for the short quadriceps moment arm. The passe 3year group limb might have an unstable knee joint in the medio-Iateral direction during the climbing/descending by showing a tendency of more ADD displacement and greater hamming co-activation EMG than the passed 1year group limbs. The TKA design was not able to help the knee joint to produce adequate knee extension moment with less quadriceps muscle effort. I think that old man needs continuous exercise for muscle strength.

• The Journal of the Korea Contents Association
• /
• v.8 no.9
• /
• pp.55-65
• /
• 2008

At these information age when the importance of news is of particular emphasis, the field of image-production for the news are being made rapid progressive by high-tech like multi-media, multi-channel digital system. Even experts who have engaged in the work of broadcasting in th field for a long time are perplexed with rapid development in Broadcasting equipments and expression techniques. The field of TV is characterized by the speed of change and the desire of viewers for new and interesting video images. The image expression system applying image line has ever existed as one of conventional image expression methods. Obsolete and old image expressions are paling into significance for viewers who want to access more information in a short time. but The change of image expression systems due to the progressive stream of time has forced existing imaginary to be changed constantly to accommodate the changing interests and expectations of the viewers. Therefore, in this treatise, we need a broad interpretation about the direction of this imaginary line for TV news image in that existing systems of image producing haven’t also been changed and adapted to the stream of time. In these days, image is defined as not only video, but also audio. also We need to reduce the confusion concerning the imaginary line and contribute to a correct understanding images of TV news for not only customers but also producer by extending and applying the concept of imaginary line to image producing.

• Journal of Distribution Science
• /
• v.12 no.6
• /
• pp.5-13
• /
• 2014

Purpose - The purposes of this editorial review are twofold: firstly, to introduce the four flagship international journals of the Korea Distribution Science Association(KODISA): the Journal of Distribution Science(JDS), the Journal of Industrial Distribution & Business(JIDB), the East Asian Journal of Business Management(EAJBM), and the Journal of Asian Finance, Economics and Business(JAFEB), and secondly, to identify the direction of the KODISA journals and the roles and responsibilities of the editors of the KODISA journals. Research design, data, and methodology - To achieve the goals, firstly, this review paper addresses the current progress of the four KODISA journals: JDS, JIDB, EAJBM, and JAFEB. Secondly, this paper defines the aims and missions of the four KODISA journals. JDS publishes the articles of examining past, current, and emerging trends and concerns in the area of distribution science and economics, logistics and SCM, transportation, distribution channel management, distribution innovation and information technology, merchandising and procurement, distribution and marketing, consumer behavior, and manufacturing, wholesaling, and retailing. JDS publishes both quantitative and qualitative research as well as scholarly commentaries, case studies, book reviews and other types of reports relating to all aspects of distribution. JIDB publishes the articles of examining past, current, and emerging trends and concerns in the areas of industry and corporate behavior, industry policy making, industrial distribution and business, e-commerce, and service industry. EAJBM publishes empirical and theoretical research papers as well as scholarly commentaries, case studies, book reviews, and other types of reports relating to all aspects of East Asian business and economy. JAFEB publishes original research analysis and inquiry into the contemporary issues of finance, economics and business management in Asia, including Central Asia, East Asia, South Asia, Southeast Asia, and Middle East. The mission of JAFEB is to bring together the latest theoretical and empirical finance, economics and business management research in Asian markets. The audiences of the KODISA journals include higher education institutions, scholars, industry researchers and practitioners, scientists, economists, and policy makers throughout the world. The main mission of the KODISA journals is to provide an intellectual platform for international scholars, promote interdisciplinary studies in social sciences and economics, and become leading journals in the social science and economics category in the world. Thirdly, this paper addresses the current status of indexing in major databases of the KODISA journals, namely: Cabell's Directories, EBSCO, SCOPUS (Elsevier), and Social Sciences Citation Index^® (SSCI, Thomson Reuters). Fourthly, this paper identifies the roles and responsibilities of the editors of the KODISA journals as the following: (1) Make sure that the journal be published in a timely manner and in international standards both in print and online versions. (2) Maintain the online homepage of the journal is always accessible to, and (3) Make sure that every article should go through a peer review process that meets international standards. Findings and conclusion - To accomplish the goals and missions of the KODISA journals, the editors of the KODISA journals must work together to publish high scholarly journals that meet international standards of journal publications.