• Journal of KSNVE
• /
• v.6 no.4
• /
• pp.431-438
• /
• 1996

The channel type structure which has large openings is frail with respect to torsional strength, and the horizontal-torsional motion is highly coupled, because of the large difference between the centroil and the shear center. Also, a discontinuous boundary phase is came from tansition section between the opened section and the closed section. To analyze the Bending- Torsional coupled mode parameters for the channel type structure, the Transfer Matrix Method was used. Comparing the result of F.D.M.T.M.M yields good results in relatively low frequency region.

• Journal of computational fluids engineering
• /
• v.14 no.3
• /
• pp.1-8
• /
• 2009

Diverging channel from gas engine exit to the inlet section of Heat Recovery Steam Generator (HRSG) has been re-designed for 1 MW system. To improve the uniformity in velocity and temperature distribution of existing design(Case A and B), two additional test geometries have been chosen for the numerical simulation. At first, gas burner exit section has been centered to the inlet section of the boiler(Case C) and uniformity in velocity and temperature distribution has been improved considerably. Secondly, the diverging channel length can be further reduced to compact geometry with new guide vane design (Case D and E). Proposed design shows overall improvement in uniformity in velocity and temperature distribution compared to existing one.

• Membrane Journal
• /
• v.2 no.2
• /
• pp.104-111
• /
• 1992

A curved channel duct is designed, built and used specifically to produce Dean vortices as a result of flow around a $180^{\circ}C$ curve. We present evidence using optical reflection of the existmace of the vortices in the curved section and following flat section. Also, three different feed soludons(DI water, a monodispersed styrene-divinyl-benzene latex particle suspension and a yeast suspension) were used to determine the effectiveness of Dean instabilities to destabilize polarization layers. For each suspension, the flux data were compared as a function of time for flow conditions with and without Dean vortices, for a $0.2{\mu}m$ microfiltration membrane. Any permeation flux improvement was not sustained for $2.0De_c$ due to the vortex-decay in the flat section after the curved channel, but a 15~30% permeation improvement was obtained for $3.8De_c$.

• Journal of the Korean Institute of Navigation
• /
• v.16 no.1
• /
• pp.65-75
• /
• 1992

The Waterway System for the Very Large Ships is One of the Important System connected between Marine Transport System and Exclusive Terminal. This study analyzed the Turning Configurations and Placement of Fairway Buoys in Waterway at the Port of Kwangyang to make Optimal Suggestion of for Ship's Safe Navigation. The following Conclusions are drawn : 1) In Area Section A, Starboard hand Buoy No14 should be changed its Location and Light Rhythms, and Buoy Nos.13 '||'&'||' 16 are required their Light Rhythms to be changed. 2) Especially in Area Section B located before the Turning Basin, The Location and Light Rhythms of Nos.20 '||'&'||' 22 buoys at Starboard Hand should be changed, Port Hand No.21 also should be done, and East Cardinal Buoy located between Nos.21and 23 should be changed its Light Rhythms, or removed if possible. 3) Buoy no.19 of Lateral Port Hand in Section B should be changed "Preferred Channel to Startboard" to distinguish Main Channel from Secondary One.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.04a
• /
• pp.69-73
• /
• 2003

A open section thick composite beam model is suggested in this study. In the model, the primary and secondary warping and transverse shear effects are incorporated. The rigidities associated with thick channel composite beam and thin channel composite beam are obtained and compared. The results show that the difference among rigidities of the thick and thin composite beams increase as the wall thickness increases.

• 한국해양학회지
• /
• v.10 no.2
• /
• pp.67-75
• /
• 1975

Tidal Flushing at the entrance channels of tidal bay or estuary in the central western coast of Korea; Gum River Estuary, Garorim Bay, Asan Bay, and Yeomha Estuary were studied with the recent data of current surveys measured by curret meter at three or five anchored stations along the section for one or two tidal periods at mean spring tide. Equilibrium relationship between tidal prism at mean spring tide and minimum flow area below the mean sea level of the channel in alluvial material was found as of O'Brien's (1931, 1969) study. Bed load transport in the tidal channel is balanced with the tidal flushing ability having a mean velocity of about 0.75m/sec or maximum velocity of about 1.25m/sec for a half tidal cycle over the section at mean spring tide which fairly agree with Brunn's study(1955, 1957). flushing actions for different hydraulic depth( mean depth) and bed material size in the channel were reviewed and found that it depend to a minor extent on the factors.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.81-81
• /
• 2004

등통로각압축(ECAP, Equal Channel Angular Pressing)공정은 다결정의 재료 덩어리를 두 채널(channel)이 일정하게 교차하는 형태의 금형에 통과시켜 단면적과 단면 형상의 큰 변화 없이 압출하는 성형법으로 다른 공정에 비해 상대적으로 낮은 압력으로 재료에 소성변형을 발생시켜 입자를 미세화 시킬 수 있으며, 기존의 분말야금에 의한 방법에 비해 상용재료를 포함한 광범위한 금속 및 합금에 적용이 용이한 점과 재료 내부에 기포가 거의 잔류하지 않는 점등의 장점을 가지고 있다.(중략)

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.1
• /
• pp.21-30
• /
• 2004

This study deals with free vibrations of laminated composite structures with a channel section using finite element method. In this paper, the mixed finite element method using Lagrangian and Hermite interpolation functions is adopted and a high-order plate theory is used to analyze laminated composite non-prismatic folded plates with a channel section more accurately for free vibration. The theory accounts for parabolic distribution of the transverse shear stress and requires no shear correction factors supposed in the first-order plate theory. An 32×32 matrix is assembled to transform the system element matrices from the local to global coordinates using a coordinate transformation matrix, in which an eighth drilling degree of freedom (DOF) per node is appended to the existing 7-DOF system. The results in this study are compared with those of available literatures for the conventional and first-order plate theory. Sample studies are carried out for various layup configurations and length-thickness ratio, and geometric shapes of plates. The significance of the high-order plate theory in analyzing complex composite structures with a channel section is enunciated in this paper.

• Journal of Advanced Navigation Technology
• /
• v.11 no.2
• /
• pp.177-186
• /
• 2007

In this paper, the optimal position offset of optical phase conjugator (OPC) and the optimal dispersion offsets of fiber sections, which are alternating with the method for the symmetry of optical power and chromatic dispersion with respect to OPC, are numerically investigated as afunction of the WDM channel numbers. The WDM channel numbers are assumed to be 8, 12, 16, 20 and 24. The bit-rate of each channel is assumed to be 40 Gbps for all cases. It is confirmed that the optimal position offset of OPC and optimal dispersion offset of fiber section are gradually increased as the WDM channel numbers are gradually increased. But, the optimal dispersion values of fiber sections per OPC position offset of 1 km are independent on WDM channel numbers, because the optimal position offset of OPC and optimal dispersion offset of fiber section are simultaneously increased as the WDM channel numbers are increased. It is also confirmed that the applying of these optimal parameter values is efficient to WDM system with many channels rather than WDM with small channels.

• ETRI Journal
• /
• v.17 no.4
• /
• pp.25-35
• /
• 1996

This paper derives the symbol error probability for quadrature amplitude modulation(QAM) with L-fold space diversity in Rayleigh fading channels. Two combining techniques, maximal ratio combining(MRC) and selection combining(SC), are considered. The formula for MRC space diversity is obtained by averaging the symbol error probability of M-ary QAM in an additive white Gaussian noise(AWGN) channel over a chi-square distribution with 2L degrees of freedom. The obtained formula overcomes the limitations of the earlier work, which has been limited only to deriving the symbol error rate(SER) of QAM with two branch MRC space diversity. The formula for SC space diversity is obtained by averaging the symbol error probability of M-ary QAM in an AWGN channel over the distribution of the maximum signal-to noise ratio among all of the diversity channels for SC space diversity has been reported yet. Analytical results show that the probability of error decreases with the order of diversity gain per additional branch decreases as the number of branches becomes larger. On the other hand, the performance of 16 QAM with MRC becomes much better than that of SC as the number of branches becomes larger. By giving the order of diversity, L, and the number of signal points, M, we have been able to obtain the SER performance of QAM with general space diversity. These results can be used to determine the order of diversity to achieve the desired SER in land mobile communication system employing QAM modulation.