• Journal of Korean Society on Water Environment
• /
• v.21 no.4
• /
• pp.393-397
• /
• 2005

In this study, flow in a porous medium is analyzed using a computer-extended perturbation series solution. The flow is modelled as a creeping flow in a periodically constricted channel. The channel walls have a sinusoidally varying width and the flow is analyzed in terms of its vorticity and stream functions in the Stokes flow regime. The perturbation series in terms of a small parameter, average width to length ratio, is extended with a computer resulting in purely asymptotic series and Pade summation is used to obtain final results. Resulting flow shows flow separations in the widening section and immobile zones in the widest section of the flow regime with reattachment in the narrowing section. Analysis of the flow separation phenomena resulted in a correlation between the two geometric parameters of the channel walls to predict the onset of flow separation in the Stokes flow regime.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.366-366
• /
• 2000

In this paper, an adaptive neuro-fuzzy filter using the conditional fuzzy c-means(CFCM) methods is proposed. Usualy, the number of fuzzy rules exponentially increases by applying the grid partitioning of the input space, in conventional adaptive neuro-fuzzy inference system(ANFIS) approaches. In order to solve this problem, CFCM method is adopted to render the clusters which represent the given input and output data. Parameter identification is performed by hybrid learning using back-propagation algorithm and total least square(TLS) method. Finally, we applied the proposed method to the nonlinear channel equalization problem and obtained a better performance than previous works.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.12
• /
• pp.3055-3070
• /
• 2013

This paper proposes an improved carrier frequency offset (CFO) and sampling frequency offset (SFO) estimation scheme for orthogonal frequency division multiplexing (OFDM) based broadcasting system with cyclic delay diversity (CDD) antenna. By exploiting a periodic nature of channel transfer function, cyclic delay and pilot pattern with a maximum channel power are carefully chosen, which helps to enable a robust estimation of CFO and SFO against the frequency selectivity of the channel. As a performance measure, a closed-form expression for the achievable mean square error of the proposed scheme is derived and is verified through simulations using the parameters of the digital radio mondiale standard. The comparison results show that the proposed frequency estimator is shown to benefit from properly selected delay parameter and pilot pattern, with a performance better than the existing estimator.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.11
• /
• pp.4469-4482
• /
• 2015

In this paper, we investigate the outage performance of a two-way decode-and-forward relaying network in an interference-limited Nakagami-m fading environment. More specifically, assuming the presence of Nakagami-m faded multiple co-channel interferers at the source/destination terminals, the closed-form approximate expression for the outage probability is derived by using moment-based estimators attaining the appropriate Nakagami-m fading parameter. Simulation results demonstrate that our analytical result is in excellent agreement with the Monte Carlo simulation.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.7
• /
• pp.316-321
• /
• 2002

In this Paper, the channel characteristics of the medium voltage(22.9kV) power line to analysis the broadband power line communication in the frequency range up to 30MHz was measured. With the sideband electrical coupler in the operating frequency range from DC to 30MHz, we measured characteristic impedance, noise and attenuation of the medium voltage power line, and then characteristic impedance was measured at the state of unloaded medium voltage power line by Scattering parameter method of Vector Network Analyzer. As a measurement result, Channel impedance shows 100~380$\Omega$ at the less than 15MHz and 70~230$\Omega$ at the more than 15 MHz. Noise characteristics of power line shows -75dBm at 20MHz and Narrowband interference noise was from 3 MHz to 7MHz.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.3
• /
• pp.66-73
• /
• 2015

This paper deals with a parametric study on boot-shaped ribs in a rectangular cooling channel. Numerical analysis of the flow and heat transfer was performed using three-dimensional Reynolds averaged Navier-Stokes equations with the Speziale, Sarkar and Gatski turbulence model. The parametric study was performed for the parameters, tip width-to rib width, tip height-to-rib height, rib height-to-channel height, and rib height-to-width ratios. To assess the cooling performance and friction loss, Numsselt number and friction factor were defined as the performance parameter, respectively. The results showed that the cooling performance and friction loss were seriously affected by the four geometric parameters.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.2
• /
• pp.182-187
• /
• 1988

Hot carrier induced device degradation characteristics under DC bias stress have been investigated in n-MOSFETs with channel length of 1.2,1.8 um, and compared with those of LDD structure device with same channel length. Based on these results, the device lifetime in normal operating bias(Vgs=Vds=5V) is evaluated. The lifetimes of conventional and LDD n-MOSFET with channel length of 1.2 um are estimated about for 17 days and for 12 years, respectively. The degradation rate of LDD n-MOSFET under the same stress is the lowest at n-region implnatation dose of 2.5E15 cm-\ulcorner while the substrate current is the lowest at the dose of 1E13cm-\ulcorner Thses results show that the device degradation characteristics are basic measurement parameter to find optimum process conditions in LDD devices and evaluate a reliability of sub-micron device.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.191-194
• /
• 2002

The final purpose of this paper is the enhancement of speech recognition rate under the matched telephone environment between training data and test data. To analyze the effect by the distortion of the changing telephone channel on every call, MFCC is used as the feature parameter and CMN, RTCN, and RASTA are used as channel compensation techniques. For each case, the variation of feature parameters of all phones is analyzed. And, we find recognition rates according to each compensation method using the continuous HMM recognizer, and examine the relationship between variation and recognition rate.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.1
• /
• pp.61-65
• /
• 2010

Threshold voltage is one of the most important factors in a device modeling. In this paper, analytical method to calculate threshold voltage for recessed channel (RC) MOSFETs is studied. If we know the fundamental parameter of device, such as radius, oxide thickness and doping concentration, threshold voltage can be obtained easily by using this model. The model predicts the threshold voltage which is the result of 2D numerical device simulation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.20-25
• /
• 2008

Codebook-based opportunistic beamforming (COBF) technique provides a beam selection diversity to the conventional opportunistic beamforming. In this paper, we design the random matrix and codebook for the COBF technique based on a kappa-factor channel model. Applying the proposed design to the COBF, nearly optimal beams are generated. Therefore, the COBF shows an outstanding performance without regard to the channel correlation related to the kappa-factor.