• Title/Summary/Keyword: Channel Distribution

Search Result 1,881, Processing Time 0.026 seconds

A Study on the Reduction of Current Kink Effect in NMOSFET SOI Device (NMOSFET SOI 소자의 Current Kink Effect 감소에 관한 연구)

  • Han, Myoung-Seok;Lee, Chung-Keun;Hong, Shin-Nam
    • Journal of the Korean Institute of Telematics and Electronics T
    • /
    • v.35T no.2
    • /
    • pp.6-12
    • /
    • 1998
  • Thin film SOI(Silicon-on-insulator) device offer unique advantages such as reduction in short channel effects, improvement of subthreshold slope, higher mobility, latch-up free nature, and so on. But these devices exhibit floating-body effet such as current kink which inhibits the proper device operation. In this paper, the SOI NMOSFET with a T-type gate structure is proposed to solve the above problem. To simulate the proposed device with TSUPREM-4, the part of gate oxide was considered to be 30nm thicker than the normal gate oxide. The I-V characteristics were simulated with 2D MEDICI. Since part of gate oxide has different oxide thickness, the gate electric field strength is not same throughout the gate and hence the impact ionization current is reduced. The current kink effect will be reduced as the impact ionization current drop. The reduction of current kink effect for the proposed device structure were shown using MEDICI by the simulation of impact ionization current, I-V characteristics, and hole current distribution.

  • PDF

Analysis of the Drain Current in Nonuniformly Doped Channel(NUDC) MOSFET's due to Pocket Ion Implantation (포켓 이온주입으로 비균질 채널도핑을 갖는 MOSFET소자의 드레인 전류 해석)

  • Koo, Hoe-Woo;Park, Joo-Seog;Lee, Kie-Young
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.36D no.9
    • /
    • pp.21-30
    • /
    • 1999
  • Halo pocket implantation in MOSFETs, which is known to be an efficient method to provent the punchthrough and threshold voltage roll-off phenomena, decreases the drain current of MOSFET devices. Although the decrease of the drain current in halo structure MOSFET is usually explained in terms of the increase of the threshold voltage, more decrease in the drain current than is predicted by the increased threshold voltage has experimentally been observed. In this work, the effect of halo doping profile on the drain current degradation is investigated in terms of the field distribution along the channel. Effective mobility model of the halo MOSFETs due to pocket implantation is presented and the degradation of the mobility is shown to be effective in the further decrease of the drain current. Present model is shown to be in good agreement with experimental results.

  • PDF

A Study on the structures of flow and water quality in the Kitan strait (Kitan 해협의 유동 및 수질구조에 관한 연구)

  • ;;Nakatsuji Keiji
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.15 no.4
    • /
    • pp.259-268
    • /
    • 2003
  • The damage of water quality like red tide occurs every year inspite of the total load regulation of pollutant inflows from land such as COD, phosphorus and so on around Seto inland sea in Japan. It is attributed to the increase of primary production due to eutrophication. and the rising and settling from the sediment containing nutrient salt. Furthermore, the recent research shows that nutrient salt such as nitrogen and phosphorus, flows into Kii channel from land as well as the Pacific ocean. To investigate the distribution of water quality and flow and residual current in Kitan strait, the field observations were carried out. The field data were obtained a time each season from 1999 to 2002. The results of observations and data of other research institution are used to understand the mechanism of pollution in the strait.

Development of a GIUH Model Based on River Fractal Characteristics (하천의 프랙탈 특성을 고려한 지형학적 순간단위도 개발(I))

  • Hong, Il-Pyo;Go, Jae-Ung
    • Journal of Korea Water Resources Association
    • /
    • v.32 no.5
    • /
    • pp.565-577
    • /
    • 1999
  • The geometric patterns of a stream network in a drainage basin can be viewed as a "fractal" with fractal dimensions. Fractals provide a mathematical framework for treatment of irregular, ostensively complex shapes that show similar patterns or geometric characteristics over a range of scale. GIUH (Geomorphological Instantaneous Unit Hydrograph) is based on the hydrologic response of surface runoff in a catchment basin. This model incorporates geomorphologic parameters of a basin using Horton's order ratios. For an ordered drainage system, the fractal dimensions can be derived from Horton's laws of stream numbers, stream lengths and stream areas. In this paper, a fractal approach, which is leading to representation of a 2-parameter Gamma distribution type GIUH, has been carried out to incorporate the self similarity of the channel networks based on the high correlations between the Horton's order ratios. The shape and scale parameter of the GIUH-Nash model of IUH in terms of Horton's order ratios of a catchment proposed by Rosso(l984J are simplified by applying the fractal dimension of main stream length and channel network of a river basin. basin.

  • PDF

A Study on the Velocity Profile in the Open-Channel Flow (개수로 흐름의 유속분포에 관한 연구)

  • Lee Jinsu;Yoon Byungman;Ryu Kwonkyu;Roh Youngsin
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2005.05b
    • /
    • pp.986-990
    • /
    • 2005
  • The present study aims to illuminate the vertical velocity profile of outer region of open-channel flow. Two sets of experiments were performed with PIV and propeller velocimeter. The first set was conducted to investigate the effect of bed roughness on the velocity distribution. The second set of experiments was carried out to find the effect of the Froude number on the velocity profile under the same bed roughness. The results reveal that the wake-law fits well with the experimental data from the bottom to the depth of maximum velocity, but it deviates from the experimental data above the maximum velocity point due to velocity-dip phenomenon, and that the velocity profile of the outer region is more influenced by the Froude number than the roughness. It is also shown that both the velocity difference between maximum velocity and surface velocity and the ratio of the average velocity to surface velocity become larger as the Froude number increases.

  • PDF

320-Channel Multi-Frequency Trans-Admittance Scanner(TAS) for Anomaly Detection (도전율 및 유전율이 다른 병소의 검출을 위한 320-채널 다주파수 Trans-Admittance Scanner(TAS))

  • Oh, Tong-In;Lee, Min-Hyoung;Kim, Hee-Jin;Woo, Eung-Je
    • Journal of Biomedical Engineering Research
    • /
    • v.28 no.1
    • /
    • pp.84-94
    • /
    • 2007
  • In order to collect information on local distribution of conductivity and permittivity underneath a scan probe, we developed a multi-frequency trans-admittance scanner (TAS). Applying a sinusoidal voltage with variable frequency on a chosen distal part of a human body, we measure exit currents from 320 grounded electrodes placed on a chosen surface of the subject. The electrodes are packaged inside a small and light scan probe. The system includes one voltage source and 17 digital ammeters. Front-end of each ammeter is a current-to-voltage converter with virtual grounding of a chosen electrode. The rest of the ammeter is a voltmeter performing digital phase-sensitive demodulation. Using resistor loads, we calibrate the system including the scan probe to compensate frequency-dependent variability of current measurements and also inter-channel variability among multiple. We found that SNR of each ammeter is about 85dB and the minimal measurable current is 5nA. Using saline phantoms with objects made from TX-151, we verified the performance of the lesion estimation algorithm. The error rate of the depth estimation was about 19.7%. For the size estimate, the error rate was about 15.3%. The results suggest improvement in lesion estimation algorithm based on multi-frequency trans-admittance data.

Discussion to Spatial Characteristics on a Sub-tidal Benthic Community Composed to the Complicated Coastal Lines Around Tongyeong, Korea (복잡한 해안선 구조를 가진 통영 해역에서 조하대 저서생물 군집의 공간특성 비교)

  • Yoon, Kon-Tak;Jung, Yun-Hwan;Kang, Rae-Seon
    • Ocean and Polar Research
    • /
    • v.32 no.2
    • /
    • pp.123-135
    • /
    • 2010
  • Around Tongyeong coasts which located in southern coast of Korea composed to the complex coastal line and scattered by small islands. It also has been distributed to a complicated bathymetric structure by several types of channels. This study carried to analyze the spatial characteristics of macrobenthic community and benthic environmental variance on sub-tidal area based on multivariate statistics tools. Sediment composition varied from muddy sand to mud, and along the channels, it composed to a heterogeneous bottoms mixed by shell fragment, cobbles and mud. Organic contents on the surface sediment varied 1.1-3.9%. Total of 272 species, $33,349\;ind./m^2$ of macrobenthos identified in all of sample area. Polychaetes also prevailed among the specimen. L. longifolia, P. pinnata dominated based on density. Considering on the biomass, echinoderm S. lacunosa, A. tricoides listed. Closer to the coastal area, the density and diversity were higher. Community structure based on cluster analysis was discriminated into three groups. Each group was also characterized by geographical state such as depth, sediment composition. In addition, when applied to the bathymetric data, the channel, which composed to the mixed sediment, made a role of limited factor which characterized to benthic community. Because the specimen around the channel have been affected on the diverse sediment mixture. Most of benthic studies in the southern coast of Korea focused to the condition of benthic organic pollution spatially, because along the coast, it also developed a aquaculture ground and industrial complex. But, as results, most of the area, it turn out the less polluted areas nevertheless similar environment situation. It supposed that benthic community affect to the bottom sediment composition by physical characteristics.

A new precast wall connection subjected to monotonic loading

  • Vaghei, Ramin;Hejazi, Farzad;Taheri, Hafez;Jaafar, Mohd Saleh;Ali, Abang Abdullah Abang
    • Computers and Concrete
    • /
    • v.17 no.1
    • /
    • pp.1-27
    • /
    • 2016
  • Final construction project cost is significantly determined by construction rate. The Industrialized Building System (IBS) was promoted to enhance the importance of prefabrication technology rather than conventional methods in construction. Ensuring the stability of a building constructed by using IBS is a challenging issue. Accordingly, the connections in a prefabricated building have a basic, natural, and essential role in providing the best continuity among the members of the building. Deficiencies of conventional precast connections were observed when precast buildings experience a large induced load, such as earthquakes and other disasters. Thus, researchers aim to determine the behavior of precast concrete structure with a specific type of connection. To clarify this problem, this study investigates the capacity behavior of precast concrete panel connections for industrial buildings with a new type of precast wall-to-wall connection (i.e., U-shaped steel channel connection). This capacity behavior is compared with the capacity behavior of precast concrete panel connections for industrial buildings that used a common approach (i.e., loop connection), which is subjected to monotonic loading as in-plane and out-of-plane loading by developing a finite element model. The principal stress distribution, deformation of concrete panels and welded wire mesh (BRC) reinforcements, plastic strain trend in the concrete panels and connections, and crack propagations are investigated for the aforementioned connection. Pushover analysis revealed that loop connections have significant defects in terms of strength for in-plane and out-of-plane loads at three translational degrees of freedom compared with the U-shaped steel channel connection.

(Design of Group Key Management Protocol for Information Security in Multicast) (멀티캐스트 정보 보호를 위한 그룰 키 관리 프로토콜의 설계)

  • 홍종준
    • Journal of the Korea Computer Industry Society
    • /
    • v.3 no.9
    • /
    • pp.1235-1244
    • /
    • 2002
  • This paper proposes a group key management protocol for a secure of all the multicast user in PIM-SM multicast group communication. With prosed architect, subgroups for multicast secure group management will be divided by RP (Rendezvous-Point) unit and each RP has a subgroup manager. Each subgroup manager gives a secure key to it's own transmitter md the transmitter compress the data with it's own secure key from the subgroup manager. Before the transmitter send the data to receiver, the transmitter prepare to encrypt a user's service by sending a encryption key to the receiver though the secure channel, after choking the user's validity through the secure channel. As the transmitter sending a data after then, the architecture is designed that the receiver will decode the received data with the transmitter's group key. As a result, the transmitting time is shortened because there is no need to data translation by group key on data sending and the data transmition is possible without new key distribution at path change to SPT (Shortest Path Tree) of the router characteristic. Additionally, the whole architecture size is samller than the other multicast secure architecture by using the conventional PIM-SIM routing structure without any additional equipment.

  • PDF

Relation of Oxide Thickness and DIBL for Asymmetric Double Gate MOSFET (비대칭 이중게이트 MOSFET에서 산화막 두께와 DIBL의 관계)

  • Jung, Hakkee
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.20 no.4
    • /
    • pp.799-804
    • /
    • 2016
  • To analyze the phenomenon of drain induced barrier lowering(DIBL) for top and bottom gate oxide thickness of asymmetric double gate MOSFET, the deviation of threshold voltage is investigated for drain voltage to have an effect on barrier height. The asymmetric double gate MOSFET has the characteristic to be able to fabricate differently top and bottom gate oxide thickness. DIBL is, therefore, analyzed for the change of top and bottom gate oxide thickness in this study, using the analytical potential distribution derived from Poisson equation. As a results, DIBL is greatly influenced by top and bottom gate oxide thickness. DIBL is linearly decreased in case top and bottom gate oxide thickness become smaller. The relation of channel length and DIBL is nonlinear. Top gate oxide thickness more influenced on DIBL than bottom gate oxide thickness in the case of high doping concentration in channel.