• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.229-233
• /
• 2004

원격탐사 자료를 이용하여 조간대 표층퇴적상의 분류가 가능하다면 현장조사와 상호 보완적으로 사용될 수 있다. 공간해상도 30 m 급의 Landsat 위성 자료를 이용하여 0.0625 mm 입자 기준에 의한 조간대의 표층 퇴적상 분류를 한 연구가 몇 차례보고 된 바 있지만, 스펙트럴 값만으로 퇴적상을 분류하기 위해서는 몇 가지 문제점이 따른다. 첫째는 점이적으로 변하는 조간대에서 입도와 위성자료 공간해상도와의 스케일 차이로 인한 mixed pixel(mixel)을 어떻게 분류할 것인가 이고 두 번째는 입도 요인 이외의 조간대 환경요인을 어떻게 고려해야 되느냐 하는 것이다. mixel에 대한 대안으로 4 m 공간해상도의 IKONOS 영상을 이용하였으며, 입도 이외의 다른 환경 요인은 조간대 지형과 조류로 (tidal channel)를 파악하여 퇴적상의 특성과 비교하였다. IKONOS를 이용한 조간대 퇴적상 분류 결과는 현장 조사 자료와 잘 일치하였으며 지형적으로 높고 조류로가 발달한 부분에 이질 퇴적상이 위치하는 것을 알 수 있었다. 이 연구는 IKONOS와 같은 공간해상도를 갖는 KOMPSAT II 위성이 2004년 진수되어 서해조간대 지역에 대해 다시기의 많은 영상을 확보할 수 있다면 조간대의 지형변화와 생태계 변화 등의 조간대 모니터링 연구에 활용되어 연안의 종합적이고 효율적인 관리에 활용될 수 있을 것으로 생각된다.

• Journal of information and communication convergence engineering
• /
• v.4 no.1
• /
• pp.18-22
• /
• 2006

A small-sized gas identification system has been fabricated and characterized using an integrated gas sensor array and artificial neural-network. The sensor array consists of four thick-film oxide semiconductor gas sensors whose sensing layers are $In_{2}O_{3}-Sb_{2}O_{5}-Pd-doped\;SnO_2$ + Pd-coated layer, $La_{2}O_{5}-PdCl_{2}-doped\;SnO_2,\;WO_{3}-doped\;SnO_{2}$ + Pt-coated layer and $ThO_{2}-V_{2}O_{5}-PdCl_{2}\;doped\;SnO_{2}$. The small-sized gas identification instrument is composed of a GMS 81504 containing an internal ROM (4k bytes), a RAM (128 bytes) and four-channel AD converter as MPU, LEDs for displaying alarm conditions for three gases (liquefied petroleum gas: LPG, liquefied natural gas: LNG and carbon monoxide: CO) and interface circuits for them. The instrument has been used to identify alarm conditions for three gases among the real circumstances and the identification has been successfully demonstrated.

• Electrical & Electronic Materials
• /
• v.7 no.4
• /
• pp.331-340
• /
• 1994

Polysilicon on insulator has been recrystallized by zone melting recrystallization method with graphite strip heaters. Experiments are performed with non-seed SOI structures. When the capping layer thickness of Si$\_$3/N$\_$4//SiO$\_$2/ is 2.0.mu.m, grain boundaries are about 120.mu.m spacing and protrusions reduced. After the seed SOI films are annealed at 1100.deg. C in NH$\_$3/ ambient for 3 hours, the recrystallized silicon surface has convex shape. After ZMR process, the tensile stress is 2.49*10$\^$9/dyn/cm$\^$2/ and 3.74*10$\^$9/dyn/cm$\^$2/ in the seed edge and seed center regions. The phenomenon of convex shape and tensile stress difference are completely eliminated by using the PSG/SiO$\_$2/ capping layer. The characterization of SOI films are showed that the SOI films are improved in wetting properties. N channel SOI MOSFET has been fabricated to investigate the electrical characteristics of the recrystallized SOI films. In the 0.7.mu.m thickness SOI MOSFET, kink effects due to the floating substrate occur and the electron mobility was calculated from the measured g$\_$m/ characteristics, which is about 589cm$\^$2//V.s. The recrystallized SOI films are shown to be a good single crystal silicon.

• Wind and Structures
• /
• v.1 no.4
• /
• pp.337-349
• /
• 1998

A numerical and experimental study was performed for the wind flow field in one area, comprising a group of several pavilions separated by passageways, of the EXPO '98 - a World Exposition (Lisbon, Portugal). The focus of this study is the characterization of the flow field to assess pedestrian comfort. The predictions were obtained employing the Reynolds averaged Navier-Stokes equations with the turbulence effects dealt with the ${\kappa}-{\varepsilon}$ RNG model. The discretization of the differential equations was accomplished with the control volume formulation in a Cartesian coordinate system, and an advanced segregated procedure was used to achieve the link between continuity and momentum equations. The evaluation of the overall numerical model was performed by comparing its predictions against experimental data for a square cylinder placed in a channel. The predicted values, for the practical geometry studied, are in a good agreement with the experimental data, showing the performance and the reliability of the ${\kappa}-{\varepsilon}$ RNG model and suggesting that the numerical simulation is a reliable methodology to provide the required information.

• Journal of Information Display
• /
• v.6 no.4
• /
• pp.1-5
• /
• 2005

Perylene-based pyrrolopyrone derivative (PPD) was synthesized via condensation reaction with perylenetetracarboxylic dianhydride and 1,2-phenylenediarnine as n-type channel material. The structure of PPD was characterized by spectroscopic methods such FT-IR and $^1H$-NMR. PPD exhibited high thermal stability ($T_{d5wt%}: 560^{\circ}C$) and was found to be soluble only in protonic solvents with high acidity such as methane sulfonic acid and trifluoroacetic acid. The PPD solution showed maximum absorption and emission at 601 and 628 nm, respectively. Thin film transistors were fabricated by vacuum deposition and solution casting method. The electron mobilities of the devices were achieved as high as $0.17{\times}10^{-6}cm^2/Vs$ for vacuum deposited device and $0.4{\times}10^{-6}cm^2/Vs$ for spin coated device, respectively.

• Journal of electromagnetic engineering and science
• /
• v.15 no.1
• /
• pp.53-58
• /
• 2015

For the testing of nonlinear power amplifiers, this paper suggests an approach to design optimized multisine signals that could be substituted for the original modulated signal. In the design of multisines, complex coefficients should be determined to mimic the target signal as much as possible, but very few methods have been adopted as general solutions to the coefficients. Furthermore, no solid method for the phase of coefficients has been proven to show the best resemblance to the original. Therefore, in order to determine the phase of multisine coefficients, a time-domain nonlinear optimization method is suggested. A frequency-domain-method based on the spectral response of the target signal is also suggested for the magnitude of the coefficients. For the verification, multisine signals are designed to emulate the LTE downlink signal of 10 MHz bandwidth and are used to test a nonlinear amplifier at 1.9 GHz. The suggested phase-optimized multisine had a lower normalized error by 0.163 dB when N = 100, and the measurement results showed that the suggested multisine achieved more accurate adjacent-channel leakage ratio (ACLR) estimation by as much as 12 dB compared to that of the conventional iterative method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.4
• /
• pp.282-285
• /
• 2004

Kinetics of H-spillover over $Pt/MoO_3$ was greatly affected by the amount of residual chlorine differing by calcination temperature. Multifacetted techniques for characterization were dedicated to elucidate the faster reduction of chlorine in the isothermal reduction (ITR) at $50^circ{C}$ after calcination. Reduction of residual chlorine over Platinum resulted in opening the more channel of hydrogen pathway into more $MoO_3$ particles and controlling the kinetics of hydrogen uptake.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.4
• /
• pp.313-316
• /
• 1999

Organic semiconductors based on conjugated thiophene oligomer have great potential to be utilized as an active layer for electronic and optoelectronic devices. In this study, a conjugated oligomer such as ${\alpha}$-sexithiophene (${\alpha}$-6T) thin films was prepared by the Organic Molecular Beam Deposition (OMBD), and various electrode materials were also deposited by a simple vacuum evaporation, respectively. Those films were photolithographically patterned for the electrical measurements. Electrical charact-erization of the thin film transistor with various channel length were executed and the field effect mobility of these thin film transistors were also calculated by the formula using the experimental data.

• Animal cells and systems
• /
• v.7 no.1
• /
• pp.75-79
• /
• 2003

Highly purified high performance thin layer chromatography (HPTLC) fractions containing a putative calcium influx factor (CIF) were prepared from the Jurkat cells and Xenopus oocytes in which $Ca^{2+}$ stores were depleted by thapsigargin treatment and from the yeast in which intracellular $Ca^{2+}$ stores were also depleted by genetic means. Microinjection of the fractions has been shown to elicit $Ca^{2+}$ dependent currents in Xenopus oocytes. The nature of the membrane currents evoked by the putative CIF appeared to be carried by chloride ions since the current was blocked by the selective chloride channel blocker 1 mM niflumic acid and its reversal potential was about -24 mV. Injection of the calcium chelator 1,2-bis(2-aminophenoxy)ethane-N, N, N',N'-tetraacetic acid (BAPTA) eradicated the current activities, suggesting the current responses are entirely $Ca^2$-dependent. Moreover, the currents were sensitive to the removal of extracellular calcium, indicating the dependence on calcium entry through the plasma membrane calcium entry channels. CIF activities were insensitive to protease, heat, and acid treatments and to Dische-reaction whereas the activities were sensitive to nucleotide pyrophosphatase and hydrazynolysis. The fraction might have a sugar because it was sensitive to Molisch test and Seliwaniff's resorcinol reaction. From the above results, CIF as a small and stable molecule seems to have pyrimidine, pyrophosphate, and a sugar moiety.oiety.

• Current Applied Physics
• /
• v.18 no.12
• /
• pp.1546-1552
• /
• 2018

The polymer nanocomposite as a gate dielectric film was prepared via sol-gel method. The formation of crosslinked structure among nanofillers and polymer matrix was proved by Fourier transform infrared spectroscopy (FT-IR). Differential thermal analysis (DTA) results showed significant increase in the thermal stability of the nanocomposite with respect to that of pure polymer. The nanocomposite films deposited on the p- and n-type Si substrates formed very smooth surface with rms roughness of 0.045 and 0.058 nm respectively. Deconvoluted $Si_{2s}$ spectra revealed the domination of the Si-OH hydrogen bonds and Si-O-Si covalence bonds in the structure of the nanocomposite film deposited on the p- and n-type Si semiconductor layers respectively. The fabricated n-channel field-effect-transistor (FET) showed the low threshold voltage and leakage currents because of the stronger connection between the nanocomposite and n-type Si substrate. Whereas, dominated hydroxyl groups in the nanocomposite dielectric film deposited on the p-type Si substrate increased trap states in the interface, led to the drop of FET operation.