• Journal of Korea Water Resources Association
• /
• v.36 no.6
• /
• pp.925-936
• /
• 2003

The objective of this study is to suggest new drawing methods of isochrones using GIS. For this purpose the Unit Hydrograph (UH) of studied watershed for instantaneous rainfall suggested by Clark have been determined by routing the time-area curve through a single linear reservoir. To evaluate constructing methods of isochrones three methods has been examined; Channel Profile and Clark-kict method; Laurenson method; Average velocity method of S.C.S. Also, these methods have been recomposed by GIS in this study. To apply first method, spatial modeling, the vector based on the stream network and Route_System measuring a distance between points has been used. A raster based on the flow direction grid from burn DEM and the slope grid from original DEM has been applied for the second method. The third method has been applied by a raster based on the landuse grid and a velocity function expressed by slope. Results by these three methods have been evaluated with observed hydrograph, and the method using average velocity method of S.C.S shows more reasonable results comparatively.

• Journal of Distribution Research
• /
• v.10 no.1
• /
• pp.33-57
• /
• 2005

After 1990's, many multi-level marketing companies lave been introduced in Korea. These MLM companies operate their stores as same way as general retailing stores. The major characteristics of these MLM companys' store is that their main customers are distributors who sell the purchased merchandise to another customers. Many studies about merchandise display in general retailing stores were reported. But, there was less research about merchandise display in these special type stores such as MLM companys' stores. This paper investigates the effects of merchandise display on distributor's merchandise selection in channel flow of multi-level marketing company. For this purpose, we formulated four hypotheses about display variance in quantity, height, location, and related merchandise to analyze the effect of merchandise display methods in MLM companys' stores. The experiment had been proceeded in three stores in a MLM company for 6 weeks and the sales data were collected by POS. The methods to analyze the data were used ANOVA and T-test. Findings of this study are as follows; First, there was no effect to store sale by the interaction effect between merchandise display method and scale of store. Second, scale of store affected considerably the volume of sales of each store according to main effect analysis. Third, display variance in quantity, height, and location did not affect store sale. In the related merchandise display, however, sale in all store was increased. Fourth, in additional analysis considering merchandise display only, display variance in both height and location affected their sale in large scale store. Based on the above results, we may predict merchandise display can affect sale in MLM companys' store as well as general retailing stores. Therefore if MLM company has large scale store, it should consider merchandise display methods in its stores.

• The KIPS Transactions:PartC
• /
• v.14C no.6
• /
• pp.493-502
• /
• 2007

In this paper, we propose a handoff-aware DiffServ scheduler which intends to guarantee various QoS requirements of multimedia services for mobile nodes in TDD/CDMA based wireless networks. TDD is widely used duplexing mechanism in wireless communications. Unlike FDD, TDD allows a node to symmetrically communicate with a base station by using a single frequency band, resulting in high utilization of wireless resources. DiffServ is regarded as a relatively simple QoS support mechanism and thus it is easy to be extended. This is because DiffServ is not a per-flow based mechanisms and it does not require any signaling protocol. However, previously proposed DiffServ schedulers for wired networks can not be deployed directly into wireless networks since they do not consider properties of wireless networks. As a solution to the problem, DSS(DiffServ Supporting Scheduler) was proposed. DSS uses uplink channel, which is originally used for a node to require a base station to transmit packets, to support QoS efficiently. However, QoS does not consider handoff so that it can not support QoS for moving nodes from one cell to the other cell. Therefor. the proposed handoff support QoS mechanism is necessary for TCC/CDMA networks. The proposed scheme allows a mobile node to achieve seamless service without QoS degradation even for the handoff duration.

• Atmosphere
• /
• v.22 no.1
• /
• pp.29-45
• /
• 2012

An unusual autumn storm developed rapidly in the western part of the East sea on the early morning of 23 October 2006. This storm produced a record-breaking heavy rain and strong wind in the northern and middle part of the Yeong-dong region; 24-h rainfall of 304 mm over Gangneung and wind speed exceeding 63.7 m $s^{-1}$ over Sokcho. In this study, MTSAT-1R (Multi-fuctional Transport Satellite) water vapor and infrared channel imagery are examined to find out some features which are dynamically associated with the development of the storm. These features may be the precursor signals of the rapidly developing storm and can be employed for very short range forecast and nowcasting of severe storm. The satellite features are summarized: 1) MTSAT-1R Water Vapor imagery exhibited that distinct dark region develops over the Yellow sea at about 12 hours before the occurrence of maximum rainfall about 1100 KST on 23 October 2006. After then, it changes gradually into dry intrusion. This dark region in the water vapor image is closely related with the positive anomaly in 500 hPa Potential Vorticity field. 2) In the Infrared imagery, low stratus (brightness temperature: $0{\sim}5^{\circ}C$) develops from near Bo-Hai bay and Shanfung peninsula and then dissipates partially on the western coast of Korean peninsula. These features are found at 10~12 hours before the maximum rainfall occurrence, which are associated with the cold and warm advection in the lower troposphere. 3) The IR imagery reveals that two convective cloud cells (brightness temperature below $-50^{\circ}C$) merge each other and after merging it grows up rapidly over the western part of East sea at about 5 hours before the maximum rainfall occurrence. These features remind that there must be the upward flow in the upper troposphere and the low-layer convergence over the same region of East sea. The time of maximum growth of the convective cloud agrees well with the time of the maximum rainfall.

• Economic and Environmental Geology
• /
• v.36 no.2
• /
• pp.123-131
• /
• 2003

Geophysical surveys(electrical resistivity, self-potential, seismic refraction, GPR) were conducted to investigate the physical properties of the subsurface, and to delineate the flow channel of leachate from a AMD(acid mine drainage), buried rock wastes and tailings, and drainage pipes at an abandoned mine(Kwangyang mine). Especially in rainy season the sites appear to be abundant in AMD leachate, characterized by electrical conductivities of 0.98-1.10 ms/S. Electrical resistivity sections indicate that the leachate flows running in two directions at southern part rise up through the narrow fracture zones at the central part and contaminates the surrounding soil and stream. Such schematic features at the anomalous zone are well correlated with negative peaks in self-potential data, the limited penetration depth in GPR data and low velocity zone in seismic refraction data. Shallow high-resistivity zone is associated with the buried rock wastes which cause the diffractions in GPR image. In addition, the events at depth of approximately 1-1.25 m in GPR sections must be the metal pipes through which AMD is drained off to the inner bay.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.528-534
• /
• 2020

The early development and use of plate heat exchangers (PHE) were in response to stringent statutory requirements from dairy products in the late 19th century, but PHEs were not exploited commercially until the 1920s. Since then, although the basic concept of PHEs has changed little, its design and construction have progressed significantly to accommodate higher temperatures and pressures, as well as large heat exchanging capacities. The development of current chevron-type corrugated heat plates has been ongoing since the oil shock in the 1970s to improve energy efficiency. The development trend of PHEs is consistent with the development of larger heat plates with better thermal efficiency, lower pressure drop, and good flow distribution. In this study, the thermal performance of small heat plates (PHE-S) and large heat plates (PHE-L) with the same plate depth and corrugation pitch were analyzed experimentally for each channel (H, M, and L type) to suggest development directions of heat plates. The test results showed that for the convectional heat transfer coefficient, the PHE-S was on average, 16.5% higher in the H type, 25% higher in the M type, and 40% higher in the L type than PHE-L. In the case of the pressure drop, the PHE-S was 19% higher in the H type, 46% higher in the M type, and 61% higher in the L type than PHE-L. These results were attributed to the differences in fluid distribution areas between the PHE-S and PHE-L, among other potential causes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.511-517
• /
• 2016

Current oil-type potential transformers for trains are filled with insulating oil, which could have problems like explosions due to rising inner pressure during train operation. Therefore, mold and dry-type potential transformers are being developed to prevent explosions. One problem in manufacturing mold-type transformers is preventing void formation around the coiled core inside the mold during epoxy filling, which could cause an electrical spark. Micro voids can remain in the resin after filling, and macro voids can occur due to the structure shape. A transformer that is being developed has a cavity at the junction of the core and the coil for better performance, and when highly viscous epoxy flows inside the cavity channel, macro voids can form inside it. Therefore, in this study, the free-surface flow of the mold filling procedure was analyzed numerically by applying the VOF method. The results were used to understand the phenomena of void formation inside the cavity and to modify the process conditions to reduce voids.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.9
• /
• pp.429-436
• /
• 2017

Unmanned Aerial Vehicles (UAV) that are piloted without human pilots can be commanded remotely via frequencies or perform pre-inputted missions. UAVs have been mainly used for military purposes, but due to the development of ICT technology, they are now widely used in the private sector. Teal Group's 2014 World UAV Forecast predicts that the UAV market will grow by 10% annually over the next decade, reaching $ 12.5 billion by 2023. However, because UAVs are primarily remotely controlled, if a malicious user accesses a remotely controlled UAV, it could seriously infringe privacy and cause financial loss or even loss of life. To solve this problem, a secure channel must be established through mutual authentication between the UAV and the control center. However, existing security techniques require a lot of computing resources and power, and because communication distances, infrastructure, and data flow are different from UAV networks, it is unsuitable for application in UAV environments. To resolve this problem, the study presents a lightweight UAV authentication method based on Physical Unclonable Functions (PUFs) that requires less computing resources in the ground Control and Non-Payload Communication (CNPC) environment, where recently, technology standardization is actively under progress.

• Journal of Ginseng Research
• /
• v.42 no.2
• /
• pp.165-174
• /
• 2018

Background: Extended endoplasmic reticulum (ER) stress may initiate apoptotic pathways in cancer cells, and ER stress has been reported to possibly increase tumor death in cancer therapy. We previously reported that caspase-8 played an important role in compound K-induced apoptosis via activation of caspase-3 directly or indirectly through Bid cleavage, cytochrome c release, and caspase-9 activation in HL-60 human leukemia cells. The mechanisms leading to apoptosis in A549 and SK-MES-1 human lung cancer cells and the role of ER stress have not yet been understood. Methods: The apoptotic effects of compound K were analyzed using flow cytometry, and the changes in protein levels were determined using Western blot analysis. The intracellular calcium levels were monitored by staining with Fura-2/AM and Fluo-3/AM. Results: Compound K-induced ER stress was confirmed through increased phosphorylation of $eIF2{\alpha}$ and protein levels of GRP78/BiP, XBP-1S, and $IRE1{\alpha}$ in human lung cancer cells. Moreover, compound-K led to the accumulation of intracellular calcium and an increase in m-calpain activities that were both significantly inhibited by pretreatment either with BAPTA-AM (an intracellular $Ca^{2+}$ chelator) or dantrolene (an RyR channel antagonist). These results were correlated with the outcome that compound K induced ER stress-related apoptosis through caspase-12, as z-ATAD-fmk (a specific inhibitor of caspase-12) partially ameliorated this effect. Interestingly, 4-PBA (ER stress inhibitor) dramatically improved the compound K-induced apoptosis. Conclusion: Cell survival and intracellular $Ca^{2+}$ homeostasis during ER stress in human lung cancer cells are important factors in the induction of the compound K-induced apoptotic pathway.

• Journal of Korea Water Resources Association
• /
• v.43 no.9
• /
• pp.789-799
• /
• 2010

The objective of this study is to suggest an approach for estimating probability rainfall using climate scenario data based GCM and to analyze changes of flood characteristics like probability rainfall, flood quantile and flood water level under climate change. The study area is Namhan river basin. Probability rainfalls which is taken 1440 minutes duration and 100-year frequency are estimated by using IPCC SRES A2 climate change scenario for each time period (S0: 1971~2000; S1: 2011~2040; S2: 2041~2070; S3: 2071~2100). Flood quantiles are estimated for 17 subbasins and flood water level is analyzed in the main channel from the downstream of Chungju dam to the upstream of Paldang dam. Probability rainfalls, peak flow from flood quantile and water depth from flood water level have increase rate in the range of 13.0~15.1 % based S0 (142.1 mm), 29.1~33.5% based S0 ($20,708\;m^3/s$), 12.6~13.6% in each S1, S2 and S3 period, respectively.