• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.565-571
• /
• 2010

This paper proposes a parity discrimination algorithm which discriminates N bit parity using a perceptron neural network and back propagation algorithm. This algorithm decides minimum hidden unit numbers when discriminates N bit parity. Therefore, this paper implements parity discrimination experiments for N bit by changing hidden unit numbers of the proposed perceptron neural network. Experiments confirm that the proposed algorithm is possible to discriminates N bit parity.

• Journal of the Korean Society of Combustion
• /
• v.4 no.1
• /
• pp.17-26
• /
• 1999

Vaporization, ignition and combustion of fuel droplets in tandem array are theoretically investigated to understand the droplet interactions in combustors. Including the effects of density variation in gas-phase, internal circulation and transient liquid heating, a numerical studies are performed by changing parameters such as initial droplet temperatures, initial droplet spacings, initial Reynolds numbers, surrounding gas temperatures, and activation energies of fuel vapors. Combustion regime maps classify the droplet combustion phenomena according to the configuration and location of the flame with respect to injection Reynolds numbers and surrounding gas temperatures. In addition, it is shown that the dynamic histories of droplets and ignition delay times are dependent on droplet size ratios and initial spacings of tandem droplets.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.660-663
• /
• 2001

The devices of BST thin films to composite (Ba$\_$0.7/ Sr$\_$0.3/)TiO$_3$using sol-gel method were fabricated by changing of the depositing layer number on Pt/Ti/SiO$_2$/Si substrate. The thin film capacitor to be ferroelectric devices was investigated by structural and electrical properties. The thickness of BST thin films at each coating numbers 3, 4 and 5 times was 2500[${\AA}$], 3500[${\AA}$], 3800[${\AA}$]. The dielectric factor of thin film when the coating numbers were 3, 4 and 5 times was 190, 400 and 460 on frequency 1[MHz]. The dielectric loss of BST thin film was linearly increased by increasing of the specimen area.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.33-38
• /
• 2008

Numerical investigation of asymmetric vortices at high angles of attack subsonic flow is performed using three-dimensional Navier-Stokes equations. A small bump has been carefully selected and attached near the nose of an ogive cylinder to simulate symmetric vortices. Selected bump shape does develop asymmetric vortices and is verified using Lamont's experimental results. By changing the angle of attack, Reynolds numbers, and Mach numbers, the characteristics of asymmetric vortices are observed. The angle of attack which contributes significantly to the generation of asymmetric vortices are over 30 degrees. By increasing Mach number and Reynolds number asymmetric vortices, hence the side forces show decreasing trend..

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2277-2279
• /
• 1999

We have investigated the characteristic analysis of ultrasonic in case of occurring partial discharge in experimental steel chamber. This study presents the discriminative method of partial discharge by optimum threshold value. We have carried out the experiments of measuring partial discharge numbers between ultrasonic sensor and transducer with changing distance and barrier inside steel chamber. After the measured data were trasformed A/D conversion by GPIB, we used the optimum method of threshold value for counting numbers of partial discharge.

• Solar Energy
• /
• v.8 no.2
• /
• pp.57-65
• /
• 1988

The coefficients of convective heat transfer were investigated when air is jetted to surface of the heated side-wall. The temperature on the side-wall was measured when the offsets changed from 1.5 to 10.5 as 7 steps at the state of fixed Reynolds numbers that were 35000, 29000 and 23000. The experimental results are as follows: 1. The mean Nusselt number is very high on the surface of reattached flow region. 2. The offset and the recirculation flow region decreased, while the mean Nusselt number increased between the outlet of nozzle and the region of reattachment flow. 3. The local Nusselt number is not concerned with Reynolds number on the recirculation flow and on the reattached flow region when the offset decrease. But the Nusselt number increased only when Reynolds numbers on the wall jet flow region increased. 4. The mean and the maximum Nusselt number decreases linearly, and in particular its values rapidly decrease in accordance with changing of the offset from 1.5 to 3 in inverse proportion.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.3-5
• /
• 2003

This paper deals with the characteristics of a capacitor-run single-phase induction motor by changing of conductor bar numbers. The Finite Element Method (FEM) is used to analyze the starting characteristics according to the rotor initial starting point about conduction bar and the characteristic analysis at the rated condition is calculated by equivalent circuit based on symmetry coordinate theory Finally, the analysis results of the analysis models have different conductor bars in their rotor are compared.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.51.1-51.1
• /
• 2016

Turbulent motions produce density and magnetic field fluctuations. Correlation between density and magnetic field fluctuations are important for interpretation of observations, such as the rotation measure (RM) and dispersion measure (DM). We study the several factors that can affect the correlation between two. In particular, we numerically investigate how the correlation time of driving affects the correlation between density and magnetic field. We perform compressible MHD turbulence simulations at different sonic Mach number and consider two different driving schemes - continuously changing driving and delta-correlated driving. The continuously changing driving results in strong anti-correlation between density and magnetic field when sonic and Alfvenic Mach numbers are similar unity. The delta-correlated driving produces virtually no correlation between two fields.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1992.04a
• /
• pp.26-29
• /
• 1992

Modern tall buildings are subject to wind induced oscillations. Those oscillations can cause discomfort to the occupants. To control these motions, tuned mass dampers have been used. In this paper, component node synthesis, based on Lagrange multipliers formulation. is applied to the along-wind motion of tall buildings with multiple tuned mass dampers. Spectral densities of accelerations of top floor are compared by changing the numbers and locations of tuned mass dampers. It is found that multiple tuned mass dampers can be more effective than single tuned mass damper in reducing the acceleration response.

• Microbiology and Biotechnology Letters
• /
• v.21 no.3
• /
• pp.214-220
• /
• 1993

The mating type a of yeast, Saccharomyces cerevisiae mutant with hmla2-102 and sir3-8ts was changed to type alpha by changing the growth temperature from 25C to 35C. A temperature-sensitive expression vector system was constructed using mating factor alpha1 (Mfalpha1) gene encoding alpha factor which is expressed in the type alpha cells. Vectors with different copy numbers were constructed by joining the promoter and pre or prepro-secretion single sequence of Mfalpha1 to promoterless PHO5' gene as a reporter gene.