• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.162-172
• /
• 2011

In this paper, a design and fabrication of 4 W power amplifier for the WiMAX frequency band(2.3~2.7 GHz) are presented. The adopted active device is a commercially available GaN HEMT chip of Triquint Company, which is recently released. The optimum input and output impedances are extracted for power amplifier design using a specially self-designed tuning jig. Using the adopted impedances value, class-F power amplifier was designed based on EM simulation. For integration and matching in the small package module, spiral inductors and interdigital capacitors are used. The fabricated power amplifier with $4.4{\times}4.4\;mm^2$ shows the efficiency above 50 % and harmonic suppression above 40 dBc for second(2nd) and third(3rd) harmonic at the output power of 36 dBm.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.11 no.2
• /
• pp.125-132
• /
• 2011

Background: Adult patients with intellectual disabilities often strongly resist the anesthetic administration for dental procedures. This study aimed to evaluate the effect of midazolam premedication in improving the cooperation level of patients who are likely to be combative and irritated during general anesthesia (GA) induction. Methods: The patients who had received dental treatment under ambulatory GA for more than two times were included. And we selected 13 patients total that needed physical restraint or ketamine IM prior to induction at the first GA, and were prescribed midazolam tablet (7.5-15 mg) at the following GA. We reviewed pre-anesthetic records and anesthesia records, and evaluated cooperative levels of patients (4 levels scale) during anesthesia induction and recovery time retrospectively. Results: All 13 patients (Male 11, Female 2) had severe mental disabilities. The average age of the patients was 24 ${\pm}$ 7 (13-37) years and their average weight was 58 ${\pm}$ 16 (34-91) kg. At the first GA, 10 patients needed physical restraint prior to induction (level 3). And 3 patients were so poorly cooperative that the induction procedure was performed after intramuscular injection of ketamine (level 4). But after the midazolam intake, 7 patients were willing to receive the anesthetic induction (level 1, 2), and 6 patient needed physical restraint (P < 0.05). There were no statistical differences in the duration of general anesthesia and postoperative recovery. Conclusions: Oral intake of midazolam was effective in improvement of cooperation without any complications.

• Journal of Plant Biotechnology
• /
• v.45 no.4
• /
• pp.347-356
• /
• 2018

Chionanthus retusus is a small deciduous tree that is widely used in landscaping due to its beautiful white spring flowers and ornamental value. Conventional propagation through seeds requires one to two years of breaking dormancy. The objective of this study was to determine the conditions of in vitro germination in C. retusus. In vitro embryo culture was carried out to investigate the effects of six factors: basal media (McCown Woody Plant Medium (WPM) and Murashige and Skoog (MS)); plant growth regulators (different combinations and concentrations of naphthaleneacetic acid (NAA), 6-Benzylaminopurine (BA), and gibberellic acid ($GA_3$)); embryo age (collected weekly beginning 36 days after fruit setting); low temperature pretreatment (storing $4^{\circ}C$ for 1, 2, 3, and 4 weeks); coconut additives (100, 200, and $300ml{\cdot}L^{-1}$); and genotype (grouping plants depending on their flowering nature). The basal medium used in this study was WPM with $2mg{\cdot}L^{-1-1}\;GA_3$, $20g{\cdot}L^{-1}$ sucrose, and $6g{\cdot}L^{-1}$ Agar. WPM medium mixed with $GA_3$, resulted in higher germination rate as compared to when using a combination of auxin and cytokinin. $GA_3$ at $2mg{\cdot}L^{-1}$ was the most effective of all combinations and concentrations of PGRs. WPM medium with $2mg{\cdot}L^{-1}GA_3$ resulted in better and faster germination (75.93%). Embryos collected at 57 days after fruit setting had the highest percent of germinated seeds (87.04%) while low-temperature pretreatment of fruits at $4^{\circ}C$ for two weeks produced the highest germination (95.37%). These results of this study could be an open ground for development of an efficient protocol for commercial production of the ornamental tree.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.20-20
• /
• 2003

We developed 30 ㎽-AlInGaN based violet laser diodes. The fabrication procedures of the laser diodes are described as follows. Firstly, GaN layers having very low defect density were grown on sapphire substrates by lateral epitaxial overgrowth method. The typical dislocation density was about 1-3$\times$10$^{6}$ /$\textrm{cm}^2$ at the wing region. Secondly, AlInGaN laser structures were grown on LEO-GaN/sapphire substrates by MOCVD. UV activation method, instead of conventional annealing, was conducted to achieve good p-type conduction. Thirdly, ridge stripe laser structures were fabricated. The cavity mirrors were formed by cleaving method. Three pairs of SiO$_2$ and TiO$_2$ layers were deposited on the rear facet for mirror coating. Lastly, laser diode chips were mounted on AlN submount wafers by epi-down bonding method. The lifetime of the laser diodes was over 10,000 hrs at room temperature under automatic power controlled condition. We expect the performance of the LDs to be improved by the optimization of the growth and fabrication process. The detailed characteristics and important issues of the laser diodes will be discussed at the conference.

• Korean Journal of Veterinary Research
• /
• v.64 no.2
• /
• pp.16.1-16.9
• /
• 2024

Autologous pericardial tissues are utilized in veterinary cardiovascular surgeries due to their accessibility and effectiveness. To enhance handling and biomechanical properties, glutaraldehyde (GA) fixation is applied. However, GA fixation can induce calcification, leading to tissue failure. This study aimed to establish an optimal rapid anti-calcification protocol by integrating ethanol treatment with the proven effective GA concentration and fixation time, facilitating application from collection to utilization. Pericardia were fixed with 0.625% GA for 20 min and subjected to ethanol treatment for 0 (group A, control), 20 (group B), and 30 minutes (group C). The treated tissues underwent mechanical test and were implanted subcutaneously in 3-week-old male rats for 7 weeks before extraction, followed by calcium analysis and histological examination via hematoxylin and eosin staining. No significant differences in mechanical properties were observed among the groups. The ethanol-treated groups (groups B and C; p < 0.05) exhibited significantly lower calcium levels than control (group A). Microscopy confirmed collagen and elastic fibers preservation, without significant immune cell variance. However, higher fibrocyte presence was noted in the ethanol-treated groups. This study presents a rapid anti-calcification protocol combining ethanol treatment with optimal GA fixation, suitable for direct surgical use of autologous tissues. Further research is necessary for long-term efficacy evaluation.

• ETRI Journal
• /
• v.45 no.1
• /
• pp.171-179
• /
• 2023

We have developed an InAlAs/InGaAs metamorphic high electron mobility transistor device fabrication process where the gate length can be tuned within the range of 0.13㎛-0.16㎛ to suit the intended application. The core processes are a two-step electron-beam lithography process using a three-layer resist and gate recess etching process using citric acid. An electron-beam lithography process was developed to fabricate a T-shaped gate electrode with a fine gate foot and a relatively large gate head. This was realized through the use of three-layered resist and two-step electron beam exposure and development. Citric acid-based gate recess etching is a wet etching, so it is very important to secure etching uniformity and process reproducibility. The device layout was designed by considering the electrochemical reaction involved in recess etching, and a reproducible gate recess etching process was developed by finding optimized etching conditions. Using the developed gate electrode process technology, we were able to successfully manufacture various monolithic microwave integrated circuits, including low noise amplifiers that can be used in the 28 GHz to 94 GHz frequency range.

• Journal of Korean Medical classics
• /
• v.21 no.2
• /
• pp.39-47
• /
• 2008

After reviewing literatures of Han dynasty or earlier that recognize tumor, bump or mass, we concluded as follows. The recognition or study on tumor, bump or mass started at least Seoju(西周) Dynasty or earlier, and academic system was developed since earlier Han Dynasty(漢代). Until Han Dynasty, main characters that recognize Tumor, bump or mass include Jong(腫), Yang(瘍), Yu(瘤), Yeong, Chang (瘡), Ong(癰), Jeo(疽), Jeok(積), Chwi(聚), Byeok(癖), Jing, and Ga, Hyeon that firstly appeared in Southern and Northern Dynasties(南北朝), and Am(癌) that firstly appeared in Song Dynasty[宋代] can also be considered as significant characters. The main perception of cancer(腫瘍) until Han Dynasty was started by understanding the concept of the word Yu(瘤) and developed through visual, tactile sensation and symptom observation of following 2 categories, One is tumor, btm1p or mass which is expressed in outer body like Yeong, Jong(腫), Chang(瘡), Yang(瘍), Ong(癰), and Jeo(疽), The other is tumor, bump or mass which is expressed internally like Jeok(積), Chwi(聚), Byeok (癖), Jing, and Ga.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.108-109
• /
• 2007

Microstructure and electrical properties of Ga-doped ZnO (GZO) films grown on $Al_2O_3$ templates by Pulsed Laser Deposition (PLD) are investigated utilizing X-ray diffraction method and Hall measurement, respectively. In order to determine the optimized operating condition of the PLD, statistical design of experiment (DOE) is employed. It provides the systematic and efficient methodology for characterization and modeling of PLD processing with a relatively small number of experiments. The most optimized recipe of the process factors is obtained by response optimizer in Minitab.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.11
• /
• pp.1034-1046
• /
• 2013

In this paper, a design of a GaN HEMT power amplifier using output matching circuit with arbitrary harmonic impedances is presented. The adopted GaN HEMT device, TGF2023-02 of TriQuint Semiconductor, was packaged in commercial package. The optimal impedances of the GaN HEMT package are extracted from load-pull simulation at package input and output reference planes. The targets of load-pull simulation are the highest output power at fundamental frequency and the highest efficiency at $2^{nd}$ and $3^{rd}$ harmonic frequencies. Because of fixture in the package, the extracted impedances shows arbitrary harmonic impedances. In order to match the optimal impedances, output matchin circuit which has 4 transmission lines is presented. Characteristic impedances and electrical lengths of the transmission lines are mathmatically calculated. The power amplfiier with $54.6{\times}40mm^2$ shows the output power of 8 W at the fundamental frequency of 2.5 GHz, the efficiency above 55 %, and harmonic suppression of above 35 dBc at the $2^{nd}$ and the $3^{rd}$ harmonics.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.345-346
• /
• 2013

InGaN material is being studied increasingly as a prospective material for solar cells. One of the merits for solar cell applications is that the band gap energy can be engineered from 0.7 eV for InN to 3.4 eV for GaN by varying of indium composition, which covers almost of solar spectrum from UV to IR. It is essential for better cell efficiency to improve not only the crystalline quality of the epitaxial layers but also fabrication of the solar cells. Fabrication includes transparent top electrodes and surface texturing which will improve the carrier extraction. Surface texturing is one of the most employed methods to enhance the extraction efficiency in LED fabrication and can be formed on a p-GaN surface, on an N-face of GaN, and even on an indium tin oxide (ITO) layer. Surface texturing method has also been adopted in InGaN-based solar cells and proved to enhance the efficiency. Since the texturing by direct etching of p-GaN, however, was known to induce the damage and result in degraded electrical properties, texturing has been studied widely on ITO layers. However, it is important to optimize the ITO thickness in Solar Cells applications since the reflectance is fluctuated by ITO thickness variation resulting in reduced light extraction at target wavelength. ITO texturing made by wet etching or dry etching was also revealed to increased series resistance in ITO film. In this work, we report a new way of texturing by deposition of thickness-optimized ITO films on ITO nano dots, which can further reduce the reflectance as well as electrical degradation originated from the ITO etching process.