• Journal of the Korean Institute of Rural Architecture
• /
• v.8 no.1
• /
• pp.70-79
• /
• 2006

This study deals with analysing the growth prospect and development direction of Donghae city with two international ports. To do so, it is progressed, firstly, to examine the general discovery about port since the late nineteenth century, secondly, to unfold it's theory with Mukho and Donghae port as Donghae city development element as the central figure, thirdly, to analyse Donghae city as the important place of traffic, the location of industry and the resource base in a spatial planning side.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.54 no.4
• /
• pp.39-46
• /
• 2017

Jack-up drilling rigs are widely used in offshore oil and gas exploration industry. It is originally designed for use in the shallow waters less than 60m of water depth; there is growing demand for their use in deeper water depth over 150m and harsher environmental conditions. In this study, global in-place analysis of jack-up rig leg for North-sea oil well is performed through numerical analysis. Firstly, environmental conditions and seabed characteristics at the North-sea are collected and investigated measurements from survey report. Based on these data, design specifications are established and the overall basic design is performed. Dynamic characteristics of the jack-up rig for North-sea are considered in the global in-place analysis both leg and hull and the basic stability against overturning moment is also analyzed. The structural integrity of the jack-up rig leg/hull is verified through the code checks and the adequate safety margin is observed. The uncertainty in jack-up behaviour is greatly influenced by the uncertainties in the soil characteristics that determine the resistance of the foundation to the forces imposed by the jack-up structure. Among the risks above mentioned, the punch-through during pre-loading is the most frequently encountered foundation problem for jack-up rigs. The objective of this paper is to clarify the detailed structure and installation engineering matters for prove the structural safety of jack-up rigs during operation. With this intention the following items are addressed; - Characteristics of structural behavior considering soil effect against environmental loads - Modes of failure and related pre-loading procedure and parameters - Typical results of structural engineering and verification by actual measurement.

• Korean Institute of Interior Design Journal
• /
• v.19 no.5
• /
• pp.95-104
• /
• 2010

One of 21st century's main paradigms is a 'Culture', and people started to express their 'cultural desires and demands' regarding public environments. Accordingly central and local governments are paying attention to these demands from their citizens and trying to establish the policies to meet these needs. This research is done to suggest the strategy programming model to support the executions of culture-centered public designs which are based on the local resources and identities. The entire research contains three sub-topics. First topic is setting the prototype phases of strategy programming. Second topic is analyzing the associated indices for each prototype phase. Third topic is suggesting Matrix Model in which the prototype phases and their associated indices are linked. Among three topics, this paper deals with the first one - the prototype phases of strategy programming. It studies this subject in relation with Place Marketing which emphasizes the local resources and identities. The prototype phases are comprised of 3 steps for Place Strategy and 4 steps for Marketing Strategy. Place Strategy should be considered prior to Marketing Strategy because in culture-centered public design, locality has priority over other concerns. The phases for Place Strategy includes 'Resource_analyzing of local resources', 'Mission_setting a purpose', and 'Targeting_segmenting target groups'. The phases for Marketing Strategy involves 'Organization_instituting the main body and/or partnership', 'Image Positioning_setting an unique local image', 'Point_realizing the product', and 'Channel_deciding the sales promotion tools'.

• The Journal of Bigdata
• /
• v.8 no.2
• /
• pp.97-107
• /
• 2023

Small business owners are relatively likely to be alienated from various benefits caused by the change to a big data/AI-based society. To support them, we would like to detect a hot place based on the floating population to support small business owners' decision-making in the start-up area. Through various studies, it is known that the population size of the region has an important effect on the sales of small business owners. In this study, inland regions were extracted from the Incheon floating population data from January 2019 to June 2022. the Data is consisted of a grid of 50m intervals, central coordinates and the population for each grid are presented, made image structure through imputation to maintain spatial information. Spatial outliers were removed and imputated using LOF and GAM, and temporal outliers were removed and imputated through LOESS. We used ConvLSTM which can take both temporal and spatial characteristics into account as a predictive model, and used AutoEncoder structure, which performs outliers detection based on reconstruction error to define an area with high MAPE as a hot place.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.3
• /
• pp.12-24
• /
• 2013

The cities of Joseon dynasty had weak structure against fire. Fires have resulted in damage on property and life. But they gave a chance to development various policies, planning tools, techniques and facilities for minimizing the damages of fire. This study aims to understand the progression of fire control policy in Joseon dynasty. Fire control policies can be divided into four categories ; fire prevention, prohibition of fire spreading, fire extinguishing and rescue system. The progression of fire control policies can be divided into three steps. In the first step, from Taejong to Moonjong, various policy, such as regal & administrative system, planning tools, fire control works & appliances have been built and executed. In the second step, from Danjong to Hyunjong, fire control work have taken the central place of fire control policy. In the third step, from Sookjong to Sunjong, development of fire control appliances have taken the central place of fire control policy.

• Journal of the Korean Regional Science Association
• /
• v.31 no.1
• /
• pp.3-20
• /
• 2015

The objective of this study is to identify the applicability of urban network theory. The degree of network and city size of 163 Si-Guns in Korea are used to perform an empirical analysis for 2005 and 2010. The result indicates that the effect of city size (based on central place theory) is still larger than the network effect (based on urban network theory). However, the effects are different according to the industrial types. The size-based effectis more efficient in manufacturing sector, whereas the network-based effect is more efficient in service industry. The trend from 2005 to 2010 indicates that there is an increasing pattern in network-based effect and decreasing patternin size-based effect. It is necessary to recognize continual benefit of the sized-based effect, however it is also important to distinguish different characteristics of the functional form by the size and network. The feasibility of the urban network theory is tested in this study with the empirical analysis and recommends the importance of policy implication with recognition of the distinction between size and network-based effects.

• Journal of Korean Society of Rural Planning
• /
• v.3 no.2
• /
• pp.36-49
• /
• 1997

The drastic change of mountain community, which have led existing villages to a size reduction or an extinction, makes this study concentrate on finding out the new community unit as a spatial zone of dayily life and agricultural production. The communality which has played a key role in a aura settlement consistency has been focused on the socio-economic aspect till now, neglecting the spatia] nature. The settlement-communality( SC) putting a stress on the spatial aspect can be, therefore, shapec as being multi-dimensional, composed of both a horizontally areal coverage on the surface of the residential place and a vertically hierarchial relationship between settlements, by analyzing thro( elements of communality that are the economic, socio -cultural and spatial activities. The research site is located administratively in Milan-Myoun, Pyoungchang-Gun, Gangwon-Do that ha: the characteristics as a typical mountain community. The results of field survey of which the method i: to draw the activity zone from an interview with every village's head and some residents with th( prepared questionaire can be summarized as followings. Firstly, the SC in almost all villages tended to be weakened or extincted, none the less, the spatia zone of that overally enlarged and got out of natural village unit(hamlet). However the areal coverall on which the SC has an influence reaches up to the alliant domain of a few villages generally congruen with the lowest level administrative district, Secondly, the economic and social activity pattern in village life has a tendency to be directly linked with a upper central place, so that has induced the function of a central village in the middle-low settlement hierarchy to be largely shrinked. Not only the conventional residents'access to goods service but also the recent service-delivers'access to residents has gradually formed the vertical communality with direct linkage between the upper and the bottom level settlements Lastly, the enfeeblement of the SC in the lowest settlement level tends to be supplemented by enlarging the horizontal zone of the SC or especially by strengthening the vertical direct linkage system. The very this point makes the mountain community open to the external world and also makes the spatial unit of community be multi-dimensional just like a cubic.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.3
• /
• pp.245-251
• /
• 2014

As delineating market areas of retail businesses has become an interesting topic in marketing field, Lee and Lee recently suggested a noteworthy method, which applied the hydrological analysis of geographical information system (GIS), based on Christaller's central place theory. They used a digital elevation model (DEM) which inverted the kernel density of retail businesses, which was measured by using bandwidths of pre-determined 500, 1000 and 5000 m, respectively. In fact, their method is not a fully data-based approach in that they used pre-determined kernel bandwidths, however, this paper has been planned to improve Lee and Lee's method by using a kind of data-based approach of the L-index that describes clustering level of point feature distribution. The case study is implemented to automobile-related retail businesses in Seoul, Korea with selected Kernel bandwidths, 1211.5, 2120.2 and 7067.2 m from L-index analysis. Subsequently, the kernel density is measured, the density DEM is created by inverting it, and boundaries of market areas are extracted. Following the study, analysis results are summarized as follows. Firstly, the L-index can be a useful tool to complement the Lee and Lee's market area analysis method. At next, the kernel bandwidths, pre-determined by Lee and Lee, cannot be uniformly applied to all kinds of retail businesses. Lastly, the L-index method can be useful for analyzing the space structure of market areas of retail businesses, based on Christaller's central place theory.

• The Korean Journal of Food And Nutrition
• /
• v.33 no.6
• /
• pp.710-720
• /
• 2020

This study was conducted to compare the quality characteristics of firm tofu (coagulant calcium chloride, CaCl2 used) made from eight imported and four domestic soybeans selling in Korean markets. The 100-seed weight of soybeans imported from China and Seonpung cultivated in Korea was the highest at 33.23 g and 32.51 g, respectively. Soybeans imported from the USA (bulk type) showed the lowest at 16.12 g, followed by Ukraine at 16.94 g, and Brazil at 18.51 g. The range of protein and fat in the 12 soybeans was 37.08~41.36% and 18.35~22.17%, respectively. The isoflavone contents were the highest in Daepung2 cultivated in Korea at 3,764.10 ㎍/g and the lowest in soybeans imported from Brazil at 1,439.85 ㎍/g. Tofu yield among the samples was in the following order: Seonpung (235.2%), China (232.0%) Daepung2 (228.7%), Daechan (225.7%), and Brazil (208%). Tofu made with soybeans cultivated in Korea (including from China) showed a higher yield compared to that made from soybeans from seven other countries. In the analysis of the correlation of quality factors of tofu, the hardness of the tofu was correlated with 100-seed weight (r=0.676⁎) and protein content of the soybeans (r=0.837⁎⁎). Tofu yield was correlated with 100-seed weight (r=0.748⁎⁎) and protein content of the soybeans (r=0.583⁎).

• Journal of Construction Engineering and Project Management
• /
• v.8 no.3
• /
• pp.1-23
• /
• 2018

Since the protection the of human being from natural disaster and atmospheric factors have become an essential requirement, some attempts have been taken place to provide shelter and create a safe environment to a more comfortable life with welfare. For this purpose, using existing resources in nature and exploiting them in a different manner have been taken into account. Initially, the performed exploitations for construction had the least damage to the environment, but over time and as a result of population growth, aggressive exploitation of nature has led to destroying effects on the environment and resulted in consequences such as pollution and environmental destruction. Thus, the construction industry has been identified as the top pollutant factors of the environment. Among various construction factors, the building materials used in this industry are considered as the most important effective factors on the environment, as they have direct influences on the environment from the beginning of construction of the final steps. This research focuses on the review of the most of the existing green materials definitions and various approaches towards using eco-efficient construction materials. It presents and discusses possible ways of reducing the destructive effects on the environment by selecting and using green materials, review current literature and highlight the necessity of applying such materials in future constructions in all communities. This paper provides a base for this purpose that sustainable development communities and environment is realized by elimination of environmental pollution and approaching the criteria of green building by using sustainable materials.