• Journal of architectural history
• /
• v.24 no.5
• /
• pp.33-40
• /
• 2015

The present study is aimed to reconsider the time of installation and the purpose of the square footstone located at the center of the wooden pagoda in Hwangnyongsa Temple, based on related precedent studies. Precedent studies are divided into two streams of assertions: one is that the square footstone was to support the major pillars at the time of building and the other is that it was installed to store Buddhist reliquaries inside the central foundation stone after the wood pagoda burnt down in the Invasion of Mongol. Summarizing the grounds with which the precedent studies support their assertions, they are the relation with Gaseopbul Yeonjwaseok, the emerging time of the square footstone, repairing work at the level of reconstruction, additional enshrinement of general Buddhist reliquaries and so on. The present study reviewed the key grounds suggested in the previous studies regarding the square footstone. First, it was determined that the square footstone has nothing to do with Gaseopbul Yeonjwaseok, after looking into the timings of appearance, condition and shape in literatures. Rather, it was assumed that Gaseopbul Yeonjwaseok resembles a stone column. Next, the square footstone is assumed to be installed after the 4th year of King Kwangjong's rule because the wood pagoda was lost in fire in the 4th year of Kwangjong's rule and it had been left alone for 68 years until the repair work finished in the 13th year of King Hyunjong. It is assumed that repair works at the level of reconstruction had been twice in total, say, once during King Kyungmun and Hyunjong, respectively. Next, looking into the establishment of the general Buddhist reliquaries and the repair work during King Kyungmun, it was not common then to enshrine additional Buddhist reliquaries when repair work progressed and so there was not an additional enshrinement of Buddhist reliquaries after King Kyungmun. However, it is hard to decide that there was no repair work at the level of reconstruction at that time. Last, we can find a similar case to the square footstone of the wood pagoda in Hwangnyongsa Temple in the copper pagoda in Japanese Yaksasa Temple. In conclusion, it is assumed that the wooden pagoda in Hwangnyongsa Temple was lost to the fire in the 4th year of King Kwangjong's rule and thus the square footstone had been used as Jinho stone to protect Buddhist reliquaries and used as a propping stone for the major pillars after King Hyungjong.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.1
• /
• pp.9-17
• /
• 2013

In this study, an efficient analytical model for the dynamic analysis of tall buildings with a shear wall-frame structural system has been proposed. A shear wall-frame structural system usually consists of a core wall showing flexural behavior and a frame presenting shear behavior. Therefore, the deformed shape of the shear wall-frame structural system is shown by the combination of flexural mode and shear mode. These characteristics should be considered when an efficient analytical model is developed. To this end, the effect of shear wall and frame on the dynamic behavior of a tall building with a dual system has been separately investigated. In this study, the structural characteristics of a separated individual shear wall model and the frame model without shear wall has been evaluated. In order to consider the effect of the shear wall in the frame model without shear wall, a rigid body was used instead of the shear wall. Each equivalent model for the separated shear wall part and frame part has been independently developed and two equivalent models were then combined to create an efficient analytical model for tall buildings with a shear wall-frame structural system. In order to verify the efficiency and accuracy of the proposed method, time history analyses of tall buildings with a shear wall-frame system were performed. Based on analytical results, it has been confirmed that the proposed method can provide accurate results, requiring significantly reduced computational time and memory.

• Journal of Navigation and Port Research
• /
• v.26 no.2
• /
• pp.167-175
• /
• 2002

Busan Port which is the representative social overhead capital facilities for international trade of goods has need the driving force for economic development in Korea. Therefore, the central government should play the major role in building a rear road to Busan Port in order that it may function as a moor port of Northeastern Asia through the systemization of mutual assistance among connected facilities, completely equipped with port-related facilities befitting to the principal port of imports and exports. In this study, the validity of container tax is being examined, analyzing container tax which is considered as an obstacle to the development of Busan Port and its purpose, and grasping the present conditions by the realistic speculation on container tax issues and its abolition. First, the port rear road as a social overhead capital facilities, which connects port and expressway, should be considered as part of port, and port is social overhead capital invested by government. Second, the Busan City imposes taxes on container. As a result, a shipper and a shipping company are paying a double charge by paying container tax with port dues. Third, Empty container and Tranship container are the factor of Busan city traffic jam but their was excluded from container tax. This is deviate from equilibrium of the tax object. Forth, it has bad influence upon the competitiveness of Busan Port as Northeastern logistics base, as other ports who are competing with Busan Port like china, Taiwan, Japan's port make their competitiveness strong by decreasing the cost of port dues.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3258-3266
• /
• 2011

This paper empirically explores how resources and family saliency of women entrepreneurs in IT business influence their business performance. Building up on prior research and Shelton[2006], we develop hypothesis on how the strategies of resolving wok family conflict relate to determinants of performance and business performance. The central hypothesis states that role sharing would be the strategy raising up the business performance. We also posit that the role sharing strategy would be adopted by women who show high saliency in both family and work. and women who have high levels of resources. Results suggest that financial resources have significant impact on role sharing strategy and the sales. The hypothesis of positive role sharing effect on the performance is not supported, indicating that combining family role might be an obstacle to business performance of women.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.91-108
• /
• 2000

Most of cervical abrasion and erosion lesions show gingival margin where the cavosurface angle is on cementum or dentin. Composite resin restoration of cervical lesion shrink toward enamel margin due to polymerization contraction. This shrinkage has clinical problem such as microleakage and secondary caries. Several methods to diminish contraction stress of composite resin restoration, such as modifying cavity form and building up restorations in several increments have been attempted. The purpose of this study was to compare polymerization contraction stress of composite resin in Class V cavity subjected to cavity forms and placement methods. In this study, finite element model of 5 types of Class V cavity was developed on computer tomogram of maxillary central incisor. The types are : 1) Box cavity 2) Box cavity with incisal bevel 3) V shape cavity 4) V shape cavity with incisal bevel 5) Saucer shape cavity. The placement methods are 1) Incisal first oblique incremental curing 2) Bulk curing. An FEM based program for light activated polymerization is not available. For simulation of curing dynamics, time dependent transient thermal conduction analysis was conducted on each cavity and each placement method. For simulation of polymerization shrinkage, thermal stress analysis was performed with each cavity and each placement method. The time-temperature dependent volume shrinkage rate, elastic modulus, and Poisson's ratio were determined in thermal conduction data. The results were as follows : 1. With all five Class V cavifies, the highest Von Mises stress at the composite-tooth interface occurred at gingival margin. 2. With box cavity, V shape cavity and saucer cavity, Von Mises stress at gingival margin of V shape cavity was lower than the others. And that of box cavity was lower than that of saucer cavity. 3. Preparing bevel at incisal cavosurface margin decreased the rate of stress development in early polymerization stage. 4. Preparing bevel at incisal cavosurface margin of V shape cavity increased the Von Mises stress at gingival margin, but decreased at incisal margin. 5. At incisal margin, stress development by bulk curing method was rapid at early stage. Stress development by first increment of incremental curing method was also rapid but lower than that by bulk curing method, however after second increment curing final stress was the same for two placement methods. 6. At gingival margin, stress development by incremental curing method was suddenly rapid at early stage of second increment curing, but final stress was the same for two placement methods.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.1
• /
• pp.38-45
• /
• 2017

Objectives: Radon may be second only to smoking as a cause of lung cancer. Radon is a colorless, tasteless radioactive gas that is formed via the radioactive decay of radium. Therefore, radon levels can build up based on the amount of radium contained in construction materials such as phospho-gypsum board or when ventilation rates are low. This study provides our findings from evaluation of radon gas at facilities and offices in an industrial complex. Methods: We evaluated the office rooms and processes of 12 manufacturing factories from May 14, 2014 to September 23, 2014. Short-term data were measured by using real-time monitoring detectors(Model 1030, Sun Nuclear Co., USA) indoors in the office buildings. The radon measurements were recorded at 30-minute intervals over approximately 48 hours. The limit of detection of this instrument is $3.7Bq/m^3$. Also, long-term data were measured by using ${\alpha}-track$ radon detectors(${\alpha}-track$, Rn-tech Co., Korea) in the office and factory buildings. Our detectors were exposed for over 90 days, resulting in a minimum detectable concentration of $7.4Bq/m^3$. Detectors were placed 150-220 cm above the floor. Results: Radon concentrations averaged $20.6{\pm}17.0Bq/m^3$($3.7-115.8Bq/m^3$) in the overall area. The monthly mean concentration of radon by building materials were in the order of gypsum>concrete>cement. Radon concentrations were measured using ${\alpha}-track$ in parallel with direct-reading radon detectors and the two metric methods for radon monitoring were compared. A t-test for the two sampling methods showed that there is no difference between the average radon concentrations(p<0.05). Most of the office buildings did not have central air-conditioning, but several rooms had window- or ceiling-mounted units. Employees could also open windows. The first, second and third floors were used mainly for office work. Conclusions: Radon levels measured during this assessment in the office rooms of buildings and processes in factories were well below the ICRP reference level of $1,000Bq/m^3$ for workplaces and also below the lower USEPA residential guideline of $148Bq/m^3$. The range of indoor annual effective dose due to radon exposure for workers working in the office and factory buildings was 0.01 to 1.45 mSv/yr. Construction materials such as phospho-gypsum board, concrete and cement were the main emission sources for workers' exposure.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.3
• /
• pp.68-79
• /
• 2012

This study examines features in using Japanese apricots that assume a leading place with a special symbolism among various species of trees adopted to traditional gardens from a landscaping view. Specific aspects of how Japanese apricots were adopted to traditional gardens are as follows. First, while Japanese apricots are used in modern landscape space, there traditionally were six types in use of Japanese apricots as Tammae(探梅) Jungmae(庭梅) Bunmae(盆梅) Byoungmae(甁梅) Chomae(造梅) and Mukmae(墨梅). Second, Japanese apricots planted in gardens[庭梅] were placed mainly in a front yard of Sarang-Chae(the men's part of a traditional house) took a central area because symbolism and ornamental values of Japanese apricots suited what classical scholars sought. Preferred planting sites at that time include south of the building, the yard of Sarang-Chae, space in front of windows and next to fences and waterside. Third, Japanese apricots in traditional gardens were planted in five ways; Dansik(單植) Daesik(對植) Gunsik(群植) Yeolsik(列植) Honsik(混植). Dansik was the most common way in planting Japanese apricots and Daesik intended to enhance orderedness and symbolism of space. Japanese apricots for appreciating in an open field took the form of Gunsik in general but Honsik was also used with species of special symbolism. This study offers an opportunity to grasp traditional planting methods of Japanese apricots based on understanding of cultural aspects of Japanese apricots by focusing on Japanese apricots, the representative traditional species of trees. Results of the study would help to recognize the need to newly understand Japanese apricots and be useful information to plant and use Japanese apricots in a traditional way.

• The Journal of the Korea Contents Association
• /
• v.19 no.10
• /
• pp.98-111
• /
• 2019

This study suggests a proper studying direction of research on relationship addiction problem. And it presents fundamental research data by analysing domestic research trends of relationship addiction among various crises of people have addiction problem. For analysis of trends on relationship addiction, I searched almost all master's and doctoral dissertations and academic journals which were studied on "addiction", "relationship addiction", "addiction relationship" from 2005 to 2019 in Korea. Also I have surveyed various publications in the data base of Research Information Sharing Service, academic research data base, the National Assembly Library and the National Central Library in Korea. And for the reasonable results, I have studied the research according to 4 steps such as "collecting data and analyzing precedent research", "building analysis criterion", "cording and analysis", "making conclusion and suggesting the development direction" The results of this study are like these. The total number of researches on relationship addiction is 67. The object of those studies were limited adult's or undergraduate students's relationship addiction. So it is necessary that the fields of relationship addiction research are expanding gradually. And the research shows that the relationship addiction problem is directly related with sexual prostitution. Therefore, there are enough needs to study more in diverse, different point of view. Also it is suggested that the proper analyses methodology of relationship addiction shoud be used and new analysis criterions should be developed. In this study, the necessity of further more study is proposed in various ways of methodology about the relation of social problem and relationship addiction. And from this study, it is proved that expending the objects and fields of the study on relationship addiction, the factors analysis on addiction, study models of addiction must be necessary to be studied.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.27 no.3
• /
• pp.71-78
• /
• 2021

Purpose: It is important to plan the ward module at a time when the size of beds, the floor area, and the construction budget are all set prior to the hospital design. In this context this study aims (1) to derive various factors affecting the ward module, and (2) to analyze the appropriate room module according to the type. Methods: Design factors related to hospital modules are derived through precedential studies, and the types of ward elevation are classified by reviewing the drawings of 18 case hospitals. And the detailed dimensions and area of the derived elements are analyzed. Results: The X-axis modules of the ward are switched to long span structural columns of 9.9 m, 12.6 m and 13.2 m, but the ward modules still represent 6.6 m. The Y-axis module of the ward shows a dimension of 9 to 9.9m in the process of changing a multi-person room into a four-person room. Type A of curtain wall with columns located on the wall of the room and type B of curtain wall located in the center of the room are analyzed due to their variations. The square window type, which forms the elevation of the square window by exposing the columns to the elevation, and the outframe type, which protrudes from the structural columns and beams, have elevation designs limited. There are, however, no obstacles to the interior space of the hospital room, so the wall composition and furniture arrangement are expected to be free. The ward area of Curtain Wall Type A, which can secure an effective area of 5.9m*5.0m, are 52.1m². The Curtain Wall Type A, Square window type, and the outframe type are 49.8m². Implications: As part of the hospital standard module plan for economical and reasonable hospital building planning, a type was proposed in this study in conjunction with the external design. It is hoped that it be a base for standard module research linked together to the Central Treatment department, Outpatient department and underground parking lot.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.2
• /
• pp.100-116
• /
• 2019

Urban green spaces, as a means to mitigate social problems and environmental risks, are getting more attention in evaluating urban environment. The inequity of green space distribution is becoming a major issue in urban planning and management. This study investigated the characteristics of green space in 3 districts (Jung-gu, Dongdaemun-gu, Seongdong-gu), that are composed of 46 administrative divisions in central Seoul, to analyze the environmental equity of urban green spaces. The correlations between the amount of green space, including the coverage of street trees, and the socioeconomic status of each administrative division were analyzed. To deduce the effects of plant coverage on the urban temperature regime, the relationship between the normalized difference of vegetation index (NDVI) and land surface temperature (LST) was analyzed. The research revealed that the mean NDVI of an administrative division was negatively correlated with the percentage of basic living recipients and disabled people. The LST of a division with low NDVI was higher due to the lack of green coverage. Such environmental inequities were closely related to residential building type, which was strongly affected by the economic status of residents. The LST of an apartment area was $2.0^{\circ}C$ lower than that of single-family houses and multi-housing areas. This is expected as the average NDVI of the apartment area was more than twice as high as the other environments considered in this study. The inequity can be exacerbated without urban planning which is deliberately designed to reduce it.