• Journal of the Korea Concrete Institute
• /
• v.23 no.3
• /
• pp.321-330
• /
• 2011

Recently, the effects of high temperature and fiber content on the residual mechnical properties of high-strength concrete were experimentally investigated. In this paper, residual mechanical properties of concrete with water to cement (w/c) ratios of 0.55, 0.42 and 0.35 exposed to high temperature are compared with those obtained in fiber reinforced concrete with similar characteristics ranging from 0.05% to 0.20% polypropylene (PP) fiber volume percentage. Also, factors including pre-load levels of 20% and 40% of the maximum load at room temperature are considered. Outbreak time, thermal strain, length change, and mass loss were tested to determine compressive strength, modulus of elasticity, and energy absorption capacity. From the results, in order to prevent the explosive spalling of 50 MPa grade concretes exposed to high temperature, more than 0.05 vol. % of PP fibers is needed. Also, the cross-sectional area of PP fiber can influence the residual mechanical properties and spalling tendency of fiber reinforced concrete exposed to high temperature. Especially, the external loading increases not only the residual mechanical properties of concrete but also the risk of spalling and brittle failure tendency.

• Journal of Periodontal and Implant Science
• /
• v.50 no.4
• /
• pp.238-250
• /
• 2020

Purpose: This study aimed to evaluate the biocompatibility and the mechanical properties of ultraviolet (UV) cross-linked and biphasic calcium phosphate (BCP)-added collagen membranes and to compare the clinical results of ridge preservation to those obtained using chemically cross-linked collagen membranes. Methods: The study comprised an in vitro test and a clinical trial for membrane evaluation. BCP-added collagen membranes with UV cross-linking were prepared. In the in vitro test, scanning electron microscopy, a collagenase assay, and a tensile strength test were performed. The clinical trial involved 14 patients undergoing a ridge preservation procedure. All participants were randomly divided into the test group, which received UV cross-linked membranes (n=7), and the control group, which received chemically cross-linked membranes (n=7). BCP bone substitutes were used for both the test group and the control group. Cone-beam computed tomography (CBCT) scans were performed and alginate impressions were taken 1 week and 3 months after surgery. The casts were scanned via an optical scanner to measure the volumetric changes. The results were analyzed using the nonparametric Mann-Whitney U test. Results: The fastest degradation rate was found in the collagen membranes without the addition of BCP. The highest enzyme resistance and the highest tensile strength were found when the collagen-to-BCP ratio was 1:1. There was no significant difference in dimensional changes in the 3-dimensional modeling or CBCT scans between the test and control groups in the clinical trial (P>0.05). Conclusions: The addition of BCP and UV cross-linking improved the biocompatibility and the mechanical strength of the membranes. Within the limits of the clinical trial, the sites grafted using BCP in combination with UV cross-linked and BCP-added collagen membranes (test group) did not show any statistically significant difference in terms of dimensional change compared with the control group.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.5
• /
• pp.29-38
• /
• 2013

The G-class cement is commonly used in practice for geothermal well cementing in order to protect a steel casing that is designed to transport hot water/steam from deep subsurface to ground surface during operating a geothermal power plant. In order to maintain optimal performance of geothermal wells, physical properties of the cementing material should be satisfactory. In this paper, relevant factors (i.e., groutability, uniaxial compression strength, thermal conductivity and free fluid content) of the G-class cement were experimentally examined with consideration of various water-cement (w/c) ratios. Important findings through the experiments herein are as follows. (1) Groutability of the G-class cement increases by adding a small dose of retarder. (2) There would be a structural defect caused when the w/c ratio is kept higher in order to secure groutability. (3) Thermal conductivity of the G-class cement is small enough to prevent heat loss from hot steam or water to the outer ground formation during generating electricity. (4) The G-class cement does not form free water channel in cementing a geothermal well. (5) The Phenolphthalein indicator is applicable to the distinction of the G-class cement from the drilling mud.

• Journal of Navigation and Port Research
• /
• v.27 no.2
• /
• pp.121-127
• /
• 2003

The Korea Maritime Police Agency(KMPA) is the national maritime Search and Rescuee (SAR) authority with the responsibility to promote an efficient organization of SAR services and to coordinate the conduct of SAR operations within the Korean Search and Rescue Region(SRR). The maritime SAR operations shall provide an adequate and effective search and rescue services to minimize the loss by rendering aid to persons in distress and property in the marine environment. The essence of a successful search and rescue operation is the speed with which it is planned and carried out because survivors who need assistance and whose chances of survival diminish rapidly with time. This paper aims to propose an optimal allocation model of maritime SAR fleet in view of minimizing the search and rescue time. When maritime accidents occur, rescue units have to reach to the distress scene within the specified time. For this, SAR units must be redeployed to an advanced base so that Rescue Units(RU) can reach to the scene of distress in the shortest possible time. The Korean maritime SRR is divided into 180 sub-areas in consideration of an operational and technical ability of SAR units. The suggested model is verified through an empirical application to the Korean maritime SRR. And also the Rescue Vessels(RV) required is estimated for each Rescue Co-ordination Center(RCC).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.253-259
• /
• 2016

This paper introduces a new variable power divider circuit with an arbitrary power division ratio ranging from $1:{\infty}$ to ${\infty}:1$. The proposed power divider circuit consists of one branch-line coupler to be a good input matching characteristic, two variable phase shifters with 90-degree phase variation to be connected two output paths of the branch-line coupler, and one ring-hybrid coupler to combine output signals of two variable phase shifter. The power division ratio between the two output ports of the proposed power divider can be easily controlled by the phase variation of the two phase shifter. The proposed power divider circuit fabricates on laminated RF-35 (h = 20 mil, er=3.5; Taconic) with a center frequency of 2 GHz. The power division ratio of the fabricated prototype varies from about 1:1000 to 5000000:1, with an input reflection characteristic(S11) of below -20 dB, an insertion loss of about -1.0 dB, and an isolation characteristic of below -17 dB between two output ports in the range 1.9-2.1 GHz.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.2
• /
• pp.102-110
• /
• 2014

The effect of a bonding layer on the performance of a quarter-wave (${\lambda}/4$) mode PVDF ultrasound transducer having not only a piezoelectric layer but also a non-piezoelectric layer between two electrodes was analyzed. The equivalent circuit of a transmission line model by Kikuchi et al.[Sound of IEICE, 55-A, 331-338 (1981)] was introduced for the analysis. The validity of the model was confirmed by comparison with a KLM model for three postulated adhesion cases of a $80{\mu}m$ thick piezoelectric PVDF film to a copper (Cu) backer. The pulse-echo responses of five PVDF transducers, each fabricated with a different thickness ($5{\mu}m{\sim}20{\mu}m$) of the bonding layer, were measured and the results were compared with those by simulation. The two results were in good agreement with each other and it was noted that the effect of the bonding layer on the performance of the transducer could be analyzed by the Kikuchi model. In detail, the $20{\mu}m$ bonding layer decreased the center frequency and the bandwidth by about 19.7 % and 25.0 %, respectively, and increased the insertion loss by 57.2 %.

• Archives of Pharmacal Research
• /
• v.21 no.5
• /
• pp.581-590
• /
• 1998

We developed a novel water-soluble camptothecin analobue, CKD602, and evaluated the inhibition of topoisomerase I and the antitumor activities against mammalian tumor cells and human tumor xenografts. CKD602 was a nanomolar inhibitor of the topoisomerase I enzyme in the cleavable complex assay. CKD602 was found to be 3 times and slightly more potent than topotecan and camptothecin as inhibitors of topoisomerase, respecitively. In tumor cell cytotoxicity, CKD602 was more potent than topotecan in 14 out of 26 human cancer cell lines tested, while it was comparable to camptothecin. CKD602 was tested for the in vivo antitumor activity against the human tumor xenograft models. CKD602 was able to imduce regression of established HT-29, WIDR and CX-1 colon tumors, LX-1 lung tumor, MX-1 breast tumor and SKOV-3 ovarian tumor as much as 80, 94, 76, 67, 87% and 88%, respectively, with comparable body weight changes to those of topotecan. Also the therapeutic margin (R/Emax: maximum tolerance dose/$ED-{58}$) of CKD602 was significantly higher than that of topotecan by 4 times. Efficacy was determined at the maximal tolerated dose levels using schedule dependent i.p. administration in mice bearing L1210 leukemia. On a Q4dx4 (every 4 day for 4 doses) schedule, the maximum tolerated dose (MTD) was 25 mg/kg per administration, which caused great weight loss and lethality in <5% tumor bearing mouse. this schedule brought significant increase in life span (ILS), 212%, with 33% of long-term survivals. The ex vivo antitumor activity of CKD602 was compared with that of topotecan and the mean antitumor index (ATI) values recorded for CKD602 were significantly higher than that noted for topotecan. From these results, CKD602 warrants further clinical investigations as a potent inhibitor of topoisomerase I.

• Journal of Digital Convergence
• /
• v.15 no.4
• /
• pp.53-63
• /
• 2017

The purpose of this study is to look at the way that speech-to-text (STT) services are used at present, and to explore measures to institutionalize such services for ease of communication for the hearing impaired. The results of this study show the following: 1) 17.8% of those surveyed had experience of using STT services, with younger individuals showing a higher rate of use; and 2) In terms of organizations providing STT services, social welfare organizations followed by civic groups (18.3%) and public organizations (18.3%). The following institutional measures are needed for STT services. First, STT services should be actively promoted as one of the reasonable conveniences defined in the 'Act on the Prohibition of Discrimination Against Disabled Persons, Remedy Against Infringement of Their Rights, etc.' Second, STT services should be additionally listed as one of the clauses of the 'Act on Welfare of Persons with Disabilities'. In particular, establishing a communication system for those with hearing impairments should serve as a catalyst for integration with sign language interpretation and welfare services. If STT services for face-to-face contacts can be improved or further enhanced using ICT, it will not only open the way for a new influx of disabled workers to join vocational rehabilitation, but also help to improve quality of life for the hearing impaired.

• Journal of agricultural medicine and community health
• /
• v.45 no.3
• /
• pp.121-129
• /
• 2020

Purpose: As dementia progresses, cognitive function decreasing leads to memory loss, speech degradation, time and space degradation and judgment degradation, which causes difficulties in carrying out tasks related to daily life. It was said that community-based non-drug intervention therapy for early dementia patients was important to participate in entertainment treatment, including activities such as awareness and exercise therapy, exercise rehabilitation, aerobic exercise, and art. Methods: This study conducted 15 experimental and 15 control groups(experimental group : Fumanet exercise, control group : general occupational therapy) for eight weeks at the Daycare Center in Gyeonggi-do to find out the impact of the Fumanet exercise program on cognitive and depression functions of the elderly. The pre-post evaluation used KGDS, MMSE. Results: There were significant differences between the two groups in the function of menopause, memory recall, attention concentration and calculation, and depression, and no significant results were obtatined in memory registration, language function, understanding and fracture. The Fumanet movement was judged to be effective in improving cognitive function and reducing depression for the elderly with dementia. Conclisions: The Fumanet movement was judged to be effective in improving cognitive function and reducing depression for the elderly with dementia.

• The Korean Journal of Mycology
• /
• v.37 no.2
• /
• pp.144-149
• /
• 2009

The occurrences of the major diseases and the densities of air-born microbes were surveyed in the cultivation facilities for oyster mushroom (Pleurotus ostreatus), king oyster mushroom (Pleurotus eryngii), and enoki mushroom (Flammulina velutipes) in different areas of Korea. Green mold disease was most often developed in oyster mushroom bed cultivation with the disease incidence rate of approximate 10% while the disease incidences from bottle and plastic envelop cultivation were less than 1~2%. In the bed cultivation, the major air-born microbes in the growth room were Aspergillus, Penicillium, Trichoderma, and Curvularia with the total fungal population density of 567~1,297 CFU/$m^3$ . However, only Trichoderma and Penicillium were detected in the growth rooms and innoculation rooms of bottle and plastic envelop cultivation with the densities of 350~700 CFU/$m^3$ and 160~260 CFU/$m^3$, respectively. The bacterial diseases become evident in the growth rooms of bottle and plastic envelop cultivation with the approximate incidence rate of 10%. The identified bacterial species were Brevibacillus levelkil, Rhizobium radiobacter, Brevundimonas vesicularis, Pseudomonas mosselii, Microbacterium testaceum. Sphingomonas panmi, Sphingomonas yabuuchiae, Paracocus dinitrificans, Curtobacterium flaccumfaciens pv. flaccumfaciens and some unidentified bacteria with the densities of 40~6,359 CFU/$m^3$ in the growth rooms and 9 CFU/$m^3$ in the inoculation room. This study indicated that the green mold disease by fungal strains was the major mushroom disease in the bed cultivation and suggested that the contamination of bacteria and fungi together in the growth media could result in severe production loss. The plastic envelope and bottle cultivation were evidenced to be less susceptible to such contaminations.