• International Journal of Railway
• /
• 제6권3호
• /
• pp.90-94
• /
• 2013

Cement or lime is generally used to improve the strength of soil. However, bacteria were utilized to produce cementation of loose soils in this study. The microo rganism called Bacillus, and $CaCl_2$ was introduced into loose sand and soft silt and $CaCO_3$ in the voids of soil particles were produced, leading to cementation of soil particles. In this study, loose sand and soft silt typically encountered in Korea were bio-treated with 3 types of bacteria concentration. The cementation (or calcite precipitation) in the soil particles induced by the high concentration bacteria treatment was investigated at 7 days after curing. Based on the results of Scanning Electron Microscope (SEM) tests and EDX analyses, high concentration bacteria treatment for loose sand was observed to produce noticeable amount of $CaCO_3$, implying a significant cementation of soil particles. It was observed that higher calcium carbonate depositions were observed in poorly graded distribution as compared to well graded distribution. In addition, effectiveness of biogrouting has also been found to be feasible by bio-treatment without any cementing agent.

• 한국식물학회:학술대회논문집
• /
• 한국식물학회 1987년도 식물생명공학 심포지움 논문집 Proceedings of Symposia on Plant Biotechnology
• /
• pp.157-167
• /
• 1987

The have been many reports that phenoloxidase are correlated with development in many fungi. C. congregatus, one of nushroom-forming basidiomycetes, which requires light for its development also has phenoloxidases. In C. congragatus, there are two sets of membrane-associated phenoloxidase (PHO I and PHO II) which are differentiated by their isozyme patterns, and each enzyme set consists of two different subtrate specific enzyme protein; o-tolidine reacting enzyme, and DOPA reacting enzyme. PHO I which is localized by a protoplast-concanavalin A technique by using a new solidifying agent, Pluronic Polyol F 127, instead of agar appears in the vegetative hyphae, and PHO II appears at the early primordial stage on agar and at the sclerotial stage of liquid shake cultures. Inhibition of PHO I with the enzyme inhibitors inhibits mushroom formation as well as melanization of the vegetative hyphae at concentrations which do not inhibit the vegetative growth. PHO I deficient mutants do not form mushrooms or melanins, and the mutants show abnormal nuclear migration patterns. PHO II has roles; possibly cementing the adjacent hyphae during the actual three dimensonal structure formation, and melanizing mushrooms and sclerotia. The possible roles of PHO I in the light reception complex and in melanin formation, the function of malanin, and possible roles of postulated post translational modifying enzymes which regulate the phenoloxidases, nuclear migration pattern, and self-nonself recognition mechanism are discussed.

• The Journal of Advanced Prosthodontics
• /
• 제6권2호
• /
• pp.88-95
• /
• 2014

PURPOSE. The purpose of this study is to evaluate if pre-treatment with desensitizers have a negative effect on microtensile bond strength before cementing a restoration using recently introduced self-adhesive resin cement to dentin. MATERIALS AND METHODS. Thirty-five human molars' occlusal surfaces were ground to expose dentin; and were randomly grouped as (n=5); 1) Gluma-(Glutaraldehyde/HEMA) 2) Aqua-Prep F-(Fluoride), 3) Bisblock-(Oxalate), 4) Cervitec Plus-(Clorhexidine), 5) Smart protect-(Triclosan), 6) Nd:YAG laser, 7) No treatment (control). After applying the selected agent, RelyX U200 self-adhesive resin cement was used to bond composite resin blocks to dentin. All groups were subjected to thermocycling for 1000 cycles between $5-55^{\circ}C$. Each bonded specimen was sectioned to microbars ($6mm{\times}1mm{\times}1mm$) (n=20). Specimens were submitted to microtensile bond strength test at a crosshead speed of 0.5 mm/min. Kolmogorov-Smirnov, Levene's test, Kruskal-Wallis One-way Analysis of Variance, and Conover's nonparametric statistical analysis were used (P<.05). RESULTS. Gluma, Smart Protect and Nd:YAG laser treatments showed comparable microtensile bond strengths compared with the control group (P>.05). The microtensile bond strengths of Aqua-Prep F, and Cervitec Plus were similar to each other but significantly lower than the control group (P<.05). Bisblock showed the lowest microtensile bond strength among all groups (P<.001). Most groups showed adhesive failure. CONCLUSION. Within the limitation of this study, it is not recommended to use Aqua-prep F, Cervitec Plus and Bisblock on dentin when used with a self-adhesive resin cement due to the decrease they cause in bond strength. Beside, pre-treatment of dentin with Gluma, Smart protect, and Nd:YAG laser do not have a negative effect.

• Journal of Biosystems Engineering
• /
• 제31권3호
• /
• pp.168-174
• /
• 2006

The purpose of this study is to develop the cold chain system by developing optimal phase change materials (PCM). There are some benefits from developing this system such as keeping freshness of agriculture products, saving energy, etc. The major results are as follows. To decide a latent heat material, the characteristics of water, sodium, polyacrylate, ethanol and N-tetradecane are analysed. Also, an insulating material is made by mixing water, nucleating agent and latent heat material, using cementing method. In addition, the sensitivity analysis for developed latent heat material($K_l,\;K_2,\;K_3$) is conducted. For $K_l,\;K_2,\;K_3$ which cans keep latent heat temperature, ranging from $0\;to\;5^{\circ}C,\;5\;to\;10^{\circ}C,\;10\;to\;15^{\circ}C$. it can keeps latent heat temperature at radiant heat (5, 12, $17^{\circ}C$) and transportation latent heat container both melting temperature and amount of latent heat of Kl are $-1.6{\pm}1.0^{\circ}C$, 326.51 J/g, respectively and freezing temperature and latent heat are $-7.98{\pm}1.5^{\circ}C$ and 174.18 J/g. and $K_2$ are $7.41{\pm}1.5^{\circ}C$, 89.80 J/g, respectively and freezing temperature and latent heat are $-2.14{\pm}1.5^{\circ}C$ and 83.90 J/g. and $K_3$ are $9.54{\pm}1.0^{\circ}C$, 145.42 J/g, respectively and freezing temperature and latent heat are $0.21{\pm}1.0^{\circ}C$ and 152.48 J/g.

• 대한소아치과학회지
• /
• 제26권3호
• /
• pp.528-537
• /
• 1999

Stainless steel crown은 소아치과 영역에서 가장 효과적이면서 신뢰할 수 있는 수복방법으로 그 사용이 확대되는 추세이다. 선학들의 연구에 의하면, stainless steel crown의 장착에 있어서 시멘트를 사용한 경우가 사용하지 않은 경우보다 8배 이상의 유지력을 얻을 수 있으므로, stainless steel crown 시술에 있어서 시멘트는 중요한 부분이라고 할 수 있다. 본 연구는 stainless steel crown의 접착을 위하여 임상적으로 흔히 사용되는 인산아연 시멘트, 폴리카복실레이트 시멘트, 접착용 글래스 아이오노머 시멘트의 접착력을 비교분석 할 목적으로 시도되었다. 인산아연 시멘트로 FLECK'S, 폴리카복실레이트 시멘트로는 HY-Bond, 접착용 글래스 아이오노머 시멘트로는 Vitremer, stainless steel로는 Sun-Platinum plate를 사용하였다. Bovine teeth, 글래스 아이오노머 시멘트(Fuji II LC), 아말감(Valiant)상에 3종의 시멘트로 형성된 기둥을 세워 양자간의 접착력을 측정하였고, 한편으로는 stainless steel plate 상에 3종의 시멘트 기둥을 세워 또한 양자간의 인장접착 강도를 만능시험기로 측정하였다. 측정치를 ANOVA와 Student t-test로 통계 처리하여 다음과 같은 결과를 얻었다. 1. Stainless steel crown에 대해 글래스 아이오노머 시멘트와 폴리카복실레이트 시멘트가 인산아연 시멘트보다 높은 인장결합강도를 보였고, 글래스 아이오노머 시멘트와 폴리카복실레이트 시멘트 사이에는 차이가 없었다. 2. Bovine teeth와 수복용 글래스 아이오노머 시멘트에 대해서는, 접착용 글래스 아이오노머 시멘트가 가장 높은 인장결합강도를 보였고, 다음으로 폴리카복실레이트 시멘트와 인산아연 시멘트의 순이었다. 3. 아말감 수복재에 대해서는, 폴리카복실레이트 시멘트와 글래스 아이오노머 시멘트가 인산아연 시멘트보다 높은 인장결합강도를 보였고, 폴리카복실레이트 시멘트와 글래스 아이오노머 시멘트 사이에는 유의한 차이가 없었다.

• 대한치과보철학회지
• /
• 제31권1호
• /
• pp.1-10
• /
• 1993

The purpose of this study was to evlauate the microleakage of 3 dentin bonding agents using different dentin pretreatment method under simulated physilogic pressure in cementing the porcelain laminate veneer. Noncarious 60 human maxillary molars were selected and randomly assigned to 4 groups of 15 each. The group with the margin placed on the enamel was classified as the control and the groups with the margin placed on root surface were subdivided into 3 groups according to the dentin bonding agents used. The group using All Bond 2 was classified as experimental group 1, the group using Scotchbond MP was classified as experimental group 2, and the group using Gluma was classified as experimental group 3. Roots were removed at 3mm below the cementoenamel junction, and reductions of the teeth for the porcelain laminate veneer were done on the mesial 1/2 of the buccal surface of each teeth. The pulp was extirpated and the pulp chamber was cleaned with 37% phosphoric acid for the patency of dentinal tubule. Under simulated physiologic pressure, porcelain laminate veneers were cemented to the teeth using each dentin bonding agent and luting cement. After cementation, all samples were stored at 36t in water for 24 hours and thermocycled for 1500 cycles, then immersed in 0.5% basic fuchsin solution and the teeth were sectioned longitudinally by using diamond saw and the extent of microleakage was measured. The following results were obtained, 1. Microleakage was observed in a few samples of control group but all the samples of experimental groups. 2. The control group showed the less extent of microleakage than the experimental groups. In experimental groups the experimental group 1 & the experimental group 2 showed similiar extent of microleakage and the experimental group 3 showed the greater extent of microleakage than other groups. Conclusively, practicing the porcelain laminate veneers in the clinic, although the margin of the porcelain laminate veneer should be placed on enamel, in the case that it is inevitable to place the margin of the porcelain laminate veneer on the root surface, it is recommened to use dentin bonding agents which use no dentin pretreatment or a dentin pretreatment which can leave the smear plugs.

• 한국환경농학회지
• /
• 제26권3호
• /
• pp.259-266
• /
• 2007

천연 지올라이트를 파쇄하여 일정한 크기의 입제를 생산하는 과정에서 부가가치가 낮은 다량의 미분이 부산물로 발생하고 있다. 본 연구에서는 분말의 천연 지올라이트를 토양 개량제나 폐수처리제의 활용성을 증대시키기 위해 포트랜드 시멘트를 접착제로 혼합하고 열처리하여 재입단화 하였다. 본 실험에 사용한 천연 지올라이트는 경북 영일만 일대에서 산출된 것으로 규반비(Si/Al) 4.8, 양이온치환용량(CEC) 68.1 cmol $kg^{-1}$이었고, clinoptilolite, mordenite이 주 광물이었으며, 기타 smectite, feldspar, quartz 등으로 이루어져 있다. 입상 지올라이트는 미분의 천연 지올라이트에 25%의 포트랜드 시멘트를 접착제로 혼합하고 토련기로 성형한 후 입단화 하였다. 이 시료는 $25^{\circ}C$에서 30일간 양생하고 $400^{\circ}C$에서 3시간 동안 열처리하였을 때 가장 효율적으로 나타났다. 입상의 지올라이트를 조제하는 과정에서 비정질의 산화광물이 생성되어 지올라이트 입단의 X-선 회절폭이 넓게 나타났고, 천연 지올라이트에 알칼이와 열처리한 시료에서는 가변전하 특성을 나타났다. 지올라이트 입단의 주요한 광물은 clinoptilolite, mordenite, tobermorite였고 천연 지올라이트와 비교해 볼 때 pH 완충력과 전하밀도가 증가하였다.