• 한국건설순환자원학회논문집
• /
• 제10권4호
• /
• pp.489-497
• /
• 2022

본 연구에서는 CNT를 적용한 시멘트 페이스트의 유동성, 역학적 성능 및 미세구조를 실험적으로 평가하였다. PCE:CNT 및 w/b를 달리한 6종류 시멘트 페이스트를 제조하였으며, 플로우, 압축강도, 흡수율 및 투수공극량을 측정하여 CNT 혼입 페이스트의 성능을 측정하였다. 또, XRD 및 SEM 분석을 통하여 시멘트 페이스트의 미세조직구조 변화를 평가하였다. 실험결과에 따르면, CNT는 시멘트 페이스트의 수화촉진효과 및 채움효과로 인하여 OPC 배합에 비하여 성능이 향상되는 것을 확인할 수 있으며, 시멘트 페이스트 중 균열을 연결하는 CNT의 가교효과를 확인할 수 있었다. 결론적으로, CNT를 적절하게 혼입할 경우, CNT는 수화촉진 및 가교효과로 인하여 콘크리트의 성능을 향상시킬 수 있는 나노소재로써 적용가능할 것으로 판단된다.

• Advances in concrete construction
• /
• 제3권2호
• /
• pp.127-143
• /
• 2015

Steel fibre reinforced concrete (SFRC) is an anisotropic material due to the random orientation of the fibres within the cement matrix. Fibres under different inclination angles provide different strength contribution of a given crack width. For that the pull-out response of inclined fibres is of great importance to understand SFRC behaviour, particularly in the case of fibres with hooked ends, which are the most widely used. The paper focuses on the numerical modelling of the pull-out response of this kind of fibres from high-strength cementitious matrix in order to study the effects of different inclination angles of the fibres to the load-displacement pull-out curves. The pull-out of the fibres is studied by means of accurate three-dimensional finite element models, which take into account the nonlinearities that are present in the physical model, such as the nonlinear bonding between the fibre and the matrix in the early stages of the loading, the unilateral contact between the fibre and the matrix, the friction at the contact areas, the plastification of the steel fibre and the plastification and cracking of the cementitious matrix. The bonding properties of the fibre-matrix interface considered in the numerical model are based on experimental results of pull-out tests on straight fibres.

• 콘크리트학회논문집
• /
• 제27권2호
• /
• pp.157-167
• /
• 2015

고속 비상체에 의한 충격을 받는 시멘트 복합체는 표면관입, 배면박리 및 관통 등 국부적인 파괴거동을 보이며, 섬유혼입에 의한 휨인성의 향상으로 인해 배면파괴를 억제할 수 있다. 이에 섬유보강 시멘트 복합체의 내충격 성능에 관한 연구가 진행되고 있으며, 다양한 종류의 섬유보강재가 개발되고 있다. 섬유보강재의 종류에 따라 섬유와 매트릭스의 부착성능, 비표면적, 혼입개체수 등이 다르기 때문에 섬유보강 시멘트 복합체의 역학특성 및 고속 충격에 의한 내충격 성능의 향상에 미치는 효과에 대하여 검토할 필요가 있다. 본 연구에서는 성상 및 물성이 다른 강섬유(Steel fiber), 폴리아미드(Polyamide), 나일론(Nylon) 및 폴리에틸렌(Polyethylene)섬유를 혼입하여 섬유 종류에 따른 휨인성의 향상과 고속 비상체 충돌에 대한 파괴저감효과에 대하여 평가하였다. 그 결과, 혼입섬유의 가교작용에 의한 응력의 재분배 및 균열발생의 억제로 인해 휨인성이 향상되었으며, 고속충격에 의한 배면파괴를 억제할 수 있었다. 또한, 동일 충격에너지에서의 배면파괴한계두께를 감소시킬 수 있어 방호시설물에 적용할 경우 부재두께의 저감이 가능할 것으로 판단된다. 한편, 강섬유보강 시멘트복합체의 경우 배면박리가 발생하였으나, 섬유와 매트릭스의 부착에 의한 일부 파편의 박리가 억제되었으며, 합성섬유보강 시멘트복합체는 섬유의 혼입개체수가 많아, 고속충격에 의한 충격파의 상쇄작용 및 에너지 분산에 의한 미세균열이 발생해 배면파괴억제효과가 큰 것으로 판단된다.

• Composites Research
• /
• 제29권6호
• /
• pp.328-335
• /
• 2016

이 연구의 목적은 석회석 미분말을 사용하여 복합재료의 연성이 향상된 시멘트계 매트릭스 섬유복합재료(ECC)를 개발하고 이 재료로 제작된 구조부재의 휨성능을 평가하는 것이다. 재료 개발을 위하여 4가지 종류의 배합을 마이크로역학과 안정상태 균열 이론을 활용하였고, 이를 위하여 시멘트계 매트릭스의 파괴인성과 섬유-시멘트 매트릭스 경계면 특성을 파악하였다. 개발된 ECC의 1축 인장변형특성과 압축강도 특성이 실험적으로 평가되었다. 또한, 2개의 구조부재를 제작하여 휨실험을 수행하였고 그 결과를 재래식 콘크리트 구조부재의 성능과 비교하였다. 재료실험 결과로 석회석 미분말의 혼입률 증가에 따라 압축강도는 감소하지만 연성은 증가하였다. 부재 실험 결과, ECC 구조부재는 재래식 콘크리트 구조부재에 비하여 높은 휨연성, 높은 휨내력, 작은 균열폭을 나타내었다.

• Advances in concrete construction
• /
• 제8권1호
• /
• pp.21-31
• /
• 2019

The rich recipe of ultra high performance concrete (UHPC) offers the higher mechanical, durability and dense microstructure property. The variable like cement/sand ratio, amount of supplementary cementitious material, water/binder ratio, amount of fiber etc. alters the UHPC hardened properties to any extent. Therefore, to understand the effects of these variables on the performance of UHPC, inevitably a stage-wise development is required. In the present experimental study, the effect of sand/cement ratio, the addition of finer material (fly ash and quartz powder) and, hybrid fiber on the fresh, compressive and microstructural property of UHPC is evaluated. The experiment is conducted in three phases; the first phase evaluates the flow value and strength attainment of ingredients, the second phase evaluates the efficiency of finer materials (fly ash and quartz powder) to develop the UHPC and the third phase evaluate the effect of hybrid fiber on the flow value and strength of ultra high performance hybrid fiber reinforced concrete (UHP-HFRC). It has been seen that the addition of fly ash improves the flow value and compressive strength of UHPC as compared to quartz powder. Further, the usage of hybrid fiber in fly ash contained matrix decreases the flow value and improves the strength of the UHP-HFRC matrix. The dense interface between matrix and fiber and, a higher amount of calcium silicate hydrate (CSH) in fly ash contained UHP-HFRC is revealed by SEM and XRD respectively. The dense interface (bond between the fiber and the UHPC matrix) and the higher CSH formation are the reason for the improvement in the compressive strength of fly ash based UHP-HFRC. The differential thermal analysis (DTA/TGA) shows the similar type of mass loss pattern, however, the amount of mass loss differs in fly ash and quartz powder contained UHP-HFRC.

• 콘크리트학회논문집
• /
• 제16권3호
• /
• pp.433-440
• /
• 2004

In order to improve the performance of concrete, generally, modern cements often incorporate several mineral admixtures. In this study, the experimental included the flow value, air content of mortar containing limestone powder and length change and compressive strength of mortar specimen immersed in sulfate solutions. From the experimental results, the limestone powder cement matrices improved the physical properties and sulfate resistance of cement matrices at $10\%$ replacement ratio of limestone powder. The $30\%$ replacement ratio of limestone powder was significantly deteriorated in sodium sulfate solution. Irrespective of fineness levels of limestone powder, length change and SDF of mortar specimens with only $10\%$ replacement was much superior to the other replacements.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.28-31
• /
• 2004

This paper discusses the role of micro and macrofibers in the workability, compressive strength, and failure of cementitious composites. Workability(flow), compressive strength, splitting strength and fracture mechanism of hybrid fiber reinforced cement composites(HFRCC) have been investigated by means of Korean Standard (KS). The specific blend pursued in this investigation is a combination of polyvinyl alcohol(PVA) and steel cord. It was demonstrated that a hybrid combination of steel and PVA enhances fiber dispersion compared to only steel cord reinforced cement composites and that the brittle and wide cracking was much reduced in HFRCC as expected because in the matrix containing the PVA fiber around the steel cord, a multiple microcracking occurred and the steel cord could sufficiently work for bridging the cracked surface.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.495-498
• /
• 2005

It was investigated the durability of the concrete to improve construction materials with polymer cement mortar in this study. With the popularity of repair and rehabilitation material, some mixtures composed of Ethylene Vinyl Acetate(EVA) was studied. Ethylene Vinyl Acetate(EVA) carried out tests to determine its properties which a include: freezing-thawing resistance test, carbonation test, and chemical resistance test. Result of freezing-thawing resistance test, mass change ratio and chemical resistance test, mass change ratio decreased of 12 and $15\~45\%$ as compared with control mortar. Carbonation depth decreased $3.7\~5.6mm$ as polymer-cement ratio increased $1\~4\%$.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.263-264
• /
• 2010

In this study, respectively and furnaced kaolin at $900^{\circ}C$ was also manufactured into meta kaolin by air cooling and water cooling method. The chemical characteristic and mechanical properties of various type of blended cements contained above mentioned gypsum and meta kaolin materials analyzed and compared with those characteristics of cement matrix with silica fume. From the test, the cement mixed meta kaolin made in water cooling has more excellent quality than other material.

• 한국건설순환자원학회논문집
• /
• 제2권2호
• /
• pp.115-127
• /
• 2014

Addition of fibers in cement or cement concrete may be of current interest, but this is not a new idea or concept. Fibers of any material and shape play an important role in improving the strength and deformation characteristics of the cement matrix in which they are incorporated. The new concept and technology reveal that the engineering advantages of adding fibers in concrete may improve the fracture toughness, fatigue resistance, impact resistance, flexural strength, compressive strength, thermal crack resistance, rebound loss, and so on. The magnitude of the improvement depends upon both the amount and the type of fibers used. In this paper, locally available waste fibers such as coir fibers, sisal fibers and polypropylene fibers have incorporated in concrete with varying percentages and l/d ratio and their effect on compressive, split, flexural, bond and impact resistance have been reported.