• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.39
• /
• pp.255-264
• /
• 1996

This Paper presents a heuristic algorithm for machine-part group formation considering part production information (Production volume, roution sequence, unit operation time, facility size) in cellular manufacturing logistics system. In general, factory space is restricted within limited size when cells are located. A twofold heuristic algorithm is developed for considering factory space restrictions of located cells. The first phase is a aggregation procedure to minimize inter cell movement for satisfactoring space restriction. The second phase is a rearrangement procedure to maximize line balancing efficiency between machines within the cell and non assigned machine during first phase. Numerical example is presented to verify the efficiency of proposed algorithm.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.226.2-226.2
• /
• 2003

.The healing of a bone defect is complex, and involves a wide range of cellular, molecular, physiological, and biological processes. The main effect of bone substitute is to promote wound healing by induce cell proliferation. Bone defect sites usually are localized below the original bone surface; therefore, space production and maintenance between the membrane and the original bone surface is essential. As a result, membranes must have proper mechanical strength to prevent the collapse of the soft tissue and maintain wound space that permits membranes of poly (L-lactide) (PLLA) were fabricated to provide and maintain sufficient space for bone growth. (omitted)

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.1-7
• /
• 2001

In this paper, we have investigated the CDMA(Code Division Multiple Access) Cellular System with non-linear equalizer in reverse link channel. In general, due to unknown characteristics of channel in the wireless communication, the distribution of the observables cannot be specified by a finite set of parameters; instead, we partitioned the m-dimensional sample space Into a finite number of disjointed regions by using quantiles and a vector quantizer based on training samples. The algorithm proposed is based on a piecewise approximation to regression function based on quantiles and conditional partition moments which are estimated by Robbins Monro Stochastic Approximation (RMSA) algorithm. The resulting equalizers and detectors are robust in the sense that they are insensitive to variations in noise distributions. The main idea is that the robust equalizers and robust partition detectors yield better performance in equiprobably partitioned subspace of observations than the conventional equalizer in unpartitioned observation space under any condition. And also, we apply this idea to the CDMA system and analyze the BER performance.

• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.3
• /
• pp.1-8
• /
• 2002

Modular Multiplication in Galois Field GF(2/sup m/) is a basic operation for many applications, particularly for public key cryptography. This paper presents a new architecture that can process modular multiplication on GF(2/sup m/) per m clock cycles using a cellular automata. Proposed architecture is more efficient in terms of the space and time than that of systolic array. Furthermore it can be efficiently used for the hardware design for exponentiation computation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.235-238
• /
• 2001

Milli-structure components are classified as a component group whose size is between macro and micro scales, that is, about less than 20mm and larger than 1mm. The forming of these components has a typical phenomenon of bulk deformation with thin sheets because of the forming size. In this study, milli-structure rectangular cup drawing is analyzed and measured using the finite element method and experiment. Generally, milli-structure containers or cases like cellular phone vibrator consist of rectangular-shaped drawing to save installation space. A systematic approach is established for the design and the experiment of the forming processes for rectangular milli-structure cases. To verify the simulation results, the experimental investigations were also carried out on a real industrial product. The numerical analysis by FEM shows good agreement with the experimental results in view of the deformation shape of the product.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.23 no.1
• /
• pp.17-28
• /
• 1998

This study suggests a procedure for designing cellular manufacturing systems (CMS) which are combined with automated guided vehicles (AGVs) using a tandem configuration. So far most of the previous studies have dealt with conventional design problems not considering the layout and the characteristics of transporters used in CMS. A mathematical model is developed using the service time to perform material transfers as a suitable meassure. The service capacity of AGVs and space limitations are also reflected in this model. As the model can be shown strongly NP-hard, a heuristic algorithm is presented, in which each cell is temporarily formed using both the set covering model and similarity coefficients, and then locations of the cells are determined by means of tabu search and finally machine perturbations are carried out. An example problem is solved to demonstrate the algorithm developed.

• Transactions of Materials Processing
• /
• v.10 no.6
• /
• pp.471-477
• /
• 2001

Milli-structure components are classified as a component group whose size is between macro and micro scales, that is, about smaller than 20mm and larger than 1mm. The forming of these components has a typical phenomenon of bulk deformation with thin sheets because of the forming size. In this study, milli-structure rectangular cup drawing is analyzed and measured using the finite element method and experiments. Special containers or cases of cellular phone vibrator to save installation space are produced by rectangular-shaped drawing. A systematic approach is established for the design and the experiment of the forming processes for rectangular milli-structure cases. To verify the simulation results, the experimental investigations were also carried out on a real industrial product. The numerical analysis by FEM shows good agreement with the experimental results in view of the deformation shape of the product.

• Fibers and Polymers
• /
• v.2 no.2
• /
• pp.51-57
• /
• 2001

Tissue engineering is one exciting approach to treat patients who need a new organ or tissue. A critical element in this approach is the polymer scaffold, as it provides a space for new tissue formation and mimics many roles of natural extra-cellular matrices. In this review, we describe several design parameters of polymer matrices that can significantly affect cellular behavior, as well as various polymers which are frequently used to date or potentially useful in many tissue engineering applications. Interactions between cells and polymer scaffolds, including specific receptor-ligand interactions, physical and degradation feature of the scaffolds, and delivery of soluble factors, should be considered in the design and tailoring of appropriate polymer matrices to be used in tissue engineering applications, as these interactions control the function and structure of engineered tissues.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.471-476
• /
• 2001

Milli-structure components ate classified as a component group whose size is between macro and micro scales, that is, about less than 20mm and larger than 1mm. The forming of these components has a typical phenomenon of bulk deformation with thin sheets because of the forming size. In this study, milli-structure rectangular cup drawing is analyzed and measured using the finite element method and experiment. Generally, milli-structure containers or cases like cellular phone vibrator consist of rectangular-shaped drawing to save installation space. A systematic approach is established for the design and the experiment of the forming processes for rectangular milli-structure cases. To verify the simulation results, the experimental investigations were also carried out on a real industrial product. The numerical analysis by FEM shows good agreement with the experimental results in view of the deformation shape of the product.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5324-5337
• /
• 2017

In this paper, we investigate the feasibility of interference alignment(IA) in signal space in the scenario of multiple cell and multiple user cellular networks, as the feasibility issue is closely related to the solvability of a multivariate polynomial system, we give the mathematical analysis to support the constraint condition obtained from the polynomial equations with the tools of algebraic geometry, and a new distribute IA algorithm is also provided to verify the accessibility of the constraint condition for symmetric system in this paper. Simulation results illustrate that the accessibility of the constraint condition is hold if and only if the degree of freedom(DoF) of each user can be divided by both the transmit and receive antenna numbers.