• Journal of Plant Biotechnology
• /
• 제29권1호
• /
• pp.59-62
• /
• 2002

Samyang Genex succeeded in commercialization of anticancer agent-paclitaxel by plant cell culture technology. The core technology of Samyang Genex relating paclitaxel production includes cell line development, cell line preservation, cell culture, scale-up technology, and purification technology. On the basis of the research, Samyang Genex built the factory operated by CGMP (current good manufacturing practice). The paclitaxel-Genexol$^{TM}$-is commercially available in Korea, and it will be launched to world market including USA after approval of US FDA.

• 디지털융복합연구
• /
• 제15권7호
• /
• pp.415-424
• /
• 2017

본 연구는 공중의 체세포복제기술에 대한 위험특성, 위험심각성, 위험인식 및 위험수용의 관계를 살펴보기 위하여 서울에 거주하는 한국인 300명을 대상으로 IBM SPSS 21 프로그램과 IBM AMOS 21 프로그램을 활용하여 탐색적 요인분석과 확인적 요인분석, 상관관계 분석, 구조모형분석을 수행하였다. 주요결과를 요약 제시하면 다음과 같다. 첫째, 공중의 체세포복제기술에 대한 위험특성은 위험심각성에 통계적으로 유의한 정적 영향을 미치는 것으로 나타났다. 둘째, 공중의 체세포복제기술에 대한 위험특성은 위험인식에 통계적으로 유의한 정적 영향을 미치는 것으로 나타났다. 셋째, 공중의 체세포복제기술에 대한 위험심각성은 위험인식에 통계적으로 유의한 정적 영향을 미치는 것으로 나타났다. 넷째, 공중의 체세포복제기술에 대한 위험특성은 위험수용에 통계적으로 유의한 부적 영향을 미치는 것으로 나타났다. 다섯째, 공중의 체세포복제기술에 대한 위험심각성은 위험수용에 통계적으로 유의한 영향을 미치지 못하였다. 여섯째, 공중의 체세포복제기술에 대한 위험인식은 위험수용에 통계적으로 유의한 영향을 미치지 못하였다.

• 한국세라믹학회지
• /
• 제44권12호
• /
• pp.710-714
• /
• 2007

LSGM$(La_{0.8}Sr_{0.2}Ga_{0.8}Mg_{0.2}O_{3-{\delta}})$ is the very promising electrolyte material for lower-temperature operation of SOFCs, especially when realized in anode-supported cells. But it is notorious for reacting with other cell components and resulting in the highly resistive reaction phases detrimental to cell performance. LDC$(La_{0.4}Ce_{0.6}O_{1.8})$, which is known to keep the interfacial stability between LSGM electrolyte and anode, was adopted in the anode-supported cell, and its effect on the interfacial reactivity and electrochemical performance of the cell was investigated. No severe interfacial reaction and corresponding resistive secondary phase was found in the cell with LDC buffer layer, and this is due to its ability to sustain the La chemical potential in LSGM. The cell exhibited the open circuit voltage of 0.64V, the maximum power density of 223 $mW/cm^2$, and the ohmic resistance of $0.17{\Omega}cm^2$ at $700^{\circ}C$. These values were much improved compared with those from the cell without any buffer layer, which implies that formation of the resistive reaction phases in LSGM and then deterioration of the cell performance is resulted mainly from the La diffusion from LSGM electrolyte to anode.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권10호
• /
• pp.4703-4723
• /
• 2018

In recent years, dense small cell network has been deployed to address the challenge that has resulted from the unprecendented growth of mobile data traffic and users. It has proven to be a cost efficeient solution to offload traffic from macro-cells. Software defined heterogeneous wireless network can decouple the control plane from the data plane. The control signal goes through the macro-cell while the data traffic can be offloaded by small cells. In this paper, we propose a framework for cell virtualization and user association in order to satisfy versatile requirements of multiple tenants. In the proposed framework, we propose an interference graph partioning based virtual-cell association and customized physical-cell association for multi-homed users in a software defined small cell network. The proposed user association scheme includes 3 steps: initialization, virtual-cell association and physical-cell association. Simulation results show that the proposed virtual-cell association outperforms the other schemes. For physical-cell association, the results on resource utilization and user fairness are examined for mobile users and infrastructure providers.

• Bulletin of the Korean Chemical Society
• /
• 제31권6호
• /
• pp.1577-1582
• /
• 2010

A 20 wt % Pt/C is fabricated and characterized for use as the cathode catalyst in a polymer electrolyte membrane fuel cell (PEMFC). By using the polyol method, the fabrication process is optimized by modifying the carbon addition sequence and precursor mixing conditions. The crystallographic structure, particle size, dispersion, and activity toward oxygen reduction of the as-prepared catalysts are compared with those of commercial Pt/C catalysts. The most effective catalyst is obtained by ultrasonic treatment of ethylene glycol-carbon mixture and immediate mixing of this mixture with a Pt precursor at the beginning of the synthesis. The catalyst exhibits very uniform particle size distribution without agglomeration. The mass activities of the as-prepared catalyst are 13.4 mA/$mg_{Pt}$ and 51.0 mA/$mg_{Pt}$ at 0.9 V and 0.85 V, respectively, which are about 1.7 times higher than those of commercial catalysts.

• Journal of Electrochemical Science and Technology
• /
• 제13권1호
• /
• pp.112-119
• /
• 2022

Molten carbonate fuel cells (MCFCs) are environmentally friendly, large-capacity power generation devices operated at approximately 650℃. If MCFCs are to be commercialized by improving their competitiveness, their cell life should be increased by operating them at lower temperatures. However, a decrease in the operating temperature causes a reduction in the cell performance because of the reduction in the electrochemical reaction rate. The cell performance can be improved by introducing a coating on the cathode of the cell. A coating with a high surface area expands the triple phase boundaries (TPBs) where the gas and electrolyte meet on the electrode surface. And the expansion of TPBs enhances the oxygen reduction reaction of the cathode. Therefore, the cell performance can be improved by increasing the reaction area, which can be achieved by coating nanosized LiCoO₂ particles on the cathode. However, although a coating improves the cell performance, a thick coating makes gas difficult to diffuse into the pore of the coating and thus reduces the cell performance. In addition, LiCoO₂-coated cathode cell exhibits stable cell performance because the coating layer maintains a uniform thickness under MCFC operating conditions. Therefore, the performance and stability of MCFCs can be improved by applying a LiCoO₂ coating with an appropriate thickness on the cathode.

• IMMUNE NETWORK
• /
• 제23권1호
• /
• pp.3.1-3.14
• /
• 2023

Microvilli are outer membrane organelles that contain cross-linked filamentous actin. Unlike well-characterized epithelial microvilli, T-cell microvilli are dynamic similar to those of filopodia, which grow and shrink intermittently via the alternate actin-assembly and -disassembly. T-cell microvilli are specialized for sensing Ags on the surface of Ag-presenting cells (APCs). Thus, these finger-shaped microprotrusions contain many signaling-related proteins and can serve as a signaling platforms that induce intracellular signals. However, they are not limited to sensing external information but can provide sites for parts of the cell-body to tear away from the cell. Cells are known to produce many types of extracellular vesicles (EVs), such as exosomes, microvesicles, and membrane particles. T cells also produce EVs, but little is known about under what conditions T cells generate EVs and which types of EVs are released. We discovered that T cells produce few exosomes but release large amounsts of microvilli-derived particles during physical interaction with APCs. Although much is unanswered as to why T cells use the same organelles to sense Ags or to produce EVs, these events can significantly affect T cell fate, including clonal expansion and death. Since TCRs are localized at microvilli tips, this membrane event also raises a new question regarding long-standing paradigm in T cell biology; i.e., surface TCR downmodulation following T cell activation. Since T-cell microvilli particles carry T-cell message to their cognate partner, these particles are termed T-cell immunological synaptosomes (TISs). We discuss the potential physiological role of TISs and their application to immunotherapies.

• Journal of Electrochemical Science and Technology
• /
• 제12권1호
• /
• pp.38-57
• /
• 2021

The different weight ratios of Pd to Pt, i.e., 16:4, 10:10, 4:16 in Pd-Pt/C and Pd (20 wt. %) /C electrocatalysts with low metal loading were synthesized for glycerol electrooxidation in an air breathing microfluidic fuel cell (MFC). The cell performance on Pd-Pt (16:4)/C anode electrocatalyst was found best among all the electrocatalysts tested. The single cell when tested at a temperature of 35℃ using Pd-Pt (16:4)/C, showed maximum open circuit voltage (OCV) of 0.70 V and maximum power density of 2.77 mW/㎠ at a current density of 7.71 mA/㎠. The power density increased 1.45 times when cell temperature was raised from 35℃ to 75℃. The maximum OCV of 0.78 V and the maximum power density of 4.03 mW/㎠ at a current density of 10.47 mA/㎠ were observed at the temperature of 75℃. The results of CV substantiate the single cell performance for various operating parameters.

• 식품과학과 산업
• /
• 제55권1호
• /
• pp.95-104
• /
• 2022

Climate change due to global warming is affecting the global environment. The fishery industry is highly dependent on the natural environment, so the fishery industry is increasingly volatile due to the rapidly changing climate change. At the same time, consumers' anxiety due to marine pollution such as microplastics, radioactivity, and heavy metals are increasing. Accordingly, cell-based seafood are being proposed as an alternative for the sustainable use of seafood resources. Cell-based seafood manufactured through a process of differentiation and proliferation using cells isolated from actual seafood and cell, scaffold, media, and bioreactor technologies are organically connected to each other. This review summarizes the latest research status of cell-based seafood. Based on this, suggests a development direction for cell-based seafood to properly settle in the future market.

• Journal of Electrochemical Science and Technology
• /
• 제8권3호
• /
• pp.183-196
• /
• 2017

The research efforts directed at advancing water electrolysis technology continue to intensify together with the increasing interest in hydrogen as an alternative source of energy to fossil fuels. Among the various water electrolysis systems reported to date, systems employing a solid polymer electrolyte membrane are known to display both improved safety and efficiency as a result of enhanced separation of products: hydrogen and oxygen. Conducting water electrolysis in an alkaline medium lowers the system cost by allowing non-platinum group metals to be used as catalysts for the complex multi-electron transfer reactions involved in water electrolysis, namely the hydrogen and oxygen evolution reactions (HER and OER, respectively). We briefly review the anion exchange membranes (AEMs) and electrocatalysts developed and applied thus far in alkaline AEM water electrolysis (AEMWE) devices. Testing the developed components in AEMWE cells is a key step in maximizing the device performance since cell performance depends strongly on the structure of the electrodes containing the HER and OER catalysts and the polymer membrane under specific cell operating conditions. In this review, we discuss the properties of reported AEMs that have been used to fabricate membrane-electrode assemblies for AEMWE cells, including membranes based on polysulfone, poly(2,6-dimethyl-p-phylene) oxide, polybenzimidazole, and inorganic composite materials. The activities and stabilities of tertiary metal oxides, metal carbon composites, and ultra-low Pt-loading electrodes toward OER and HER in AEMWE cells are also described.