• 동력기계공학회지
• /
• 제19권2호
• /
• pp.84-89
• /
• 2015

The occurrence of algae caused by eutrophication of fresh water is a pollution source to destroy the aquatic environment. When the high voltage electric field is applied in the water, When a high voltage is applied to the electric field in the water, the algae can be broken the balance of cell membranes, and is dead. In this paper, we develop a water quality improvement system for generating an electric field having a higher energy than the zeta potential when a high voltage is applied to 4,000V. To ensure the mobility of the water quality improvement system, we designed the PV generation system using the optimal size technique that is based on the model of power lack ratio. By evaluating the output characteristics of the water quality improvement system, power generation characteristics of the PV generation system, and battery charging characteristics, we can show that the proposed system can be applicable to the water quality improvement system inhibiting the growth rate of the algae in the fresh water.

• 한국광학회지
• /
• 제14권3호
• /
• pp.244-248
• /
• 2003

공초점 렌즈의 조합으로 사용되는 두 렌즈의 초점거리의 비율에 해당하는 비율 만큼 입사되는 광의 입사각을 줄일 수 있다. 이 결과로 CCD상의 간섭 패턴의 공간 주파수가 낮아진다. 따라서 CCD의 구성 화소들의 간격에 의해 한정되는 기록 가능한 공간 주파수 보다 높은 공간 주파수의 간섭 패턴을 기록할 수 있어 보다 큰 물체의 간섭 패턴을 기록할 수 있다. 또한 이러한 광학계로 기록한 간섭 패턴의 수치적 재생(Numerical Reconstrction) 결과에서는 0-차 회절광의 면적이 초점거리 비율의 역수의 제곱에 해당하는 만큼 축소되는 장점이 있다.

• 한국재료학회지
• /
• 제19권5호
• /
• pp.233-239
• /
• 2009

The electrocatalytic behavior of the PtCo catalyst supported on the multi-walled carbon nanotubes (MWNTs) has been evaluated and compared with commercial Pt/C catalyst in a polymer electrolyte membrane fuel cell(PEMFC). A PtCo/MWNTs electrocatalyst with a Pt:Co atomic ratio of 79:21 was synthesized and applied to a cathode of PEMFC. The structure and morphology of the synthesized PtCo/MWNTs electrocatalysts were characterized by X-ray diffraction and transmission electron microscopy. As a result of the X-ray studies, the crystal structure of a PtCo particle was determined to be a face-centered cubic(FCC) that was the same as the platinum structure. The particle size of PtCo in PtCo/MWNTs and Pt in Pt/C were 2.0 nm and 2.7 nm, respectively, which were calculated by Scherrer's formula from X-ray diffraction data. As a result we concluded that the specific surface activity of PtCo/MWNTs is superior to Pt/C's activity because of its smaller particle size. From the electrochemical impedance measurement, the membrane electrode assembly(MEA) fabricated with PtCo/MWNTs showed smaller anodic and cathodic activation losses than the MEA with Pt/C, although ohmic loss was the same as Pt/C. Finally, from the evaluation of cyclic voltammetry(CV), the unit cell using PtCo/MWNTs as the cathode electrocatalyst showed slightly higher fuel cell performance than the cell with a commercial Pt/C electrocatalyst.

• Current Photovoltaic Research
• /
• 제1권1호
• /
• pp.38-43
• /
• 2013

$Cu(In,Ga)_3Se_5$ is a candidate material for the top cell of $Cu(In,Ga)Se_2$ tandem cells. This phase is often found at the surface of the $Cu(In,Ga)Se_2$ film during $Cu(In,Ga)Se_2$ cell fabrication, and plays a positive role in $Cu(In,Ga)Se_2$ cell performance. However, the exact properties of the $Cu(In,Ga)_3Se_5$ film have not been extensively studied yet. In this work, $Cu(In,Ga)_3Se_5$ films were fabricated on Mo-coated soda-lime glass substrates by a three-stage co-evaporation process. The Cu content in the film was controlled by varying the deposition time of each stage. X-ray diffraction and Raman spectroscopy analyses showed that, even though the stoichiometric Cu/(In+Ga) ratio is 0.25, $Cu(In,Ga)_3Se_5$ is easily formed in a wide range of Cu content as long as the Cu/(In+Ga) ratio is held below 0.5. The optical band gap of $Cu_{0.3}(In_{0.65}Ga_{0.35})_3Se_5$ composition was found to be 1.35eV. As the Cu/(In+Ga) ratio was decreased further below 0.5, the grain size became smaller and the band gap increased. Unlike the $Cu(In,Ga)Se_2$ solar cell, an external supply of Na with $Na_2S$ deposition further increased the cell efficiency of the $Cu(In,Ga)_3Se_5$ solar cell, indicating that more Na is necessary, in addition to the Na supply from the soda lime glass, to suppress deep level defects in the $Cu(In,Ga)_3Se_5$ film. The cell efficiency of $CdS/Cu(In,Ga)_3Se_5$ was improved from 8.8 to 11.2% by incorporating Na with $Na_2S$ deposition on the CIGS film. The fill factor was significantly improved by the Na incorporation, due to a decrease of deep-level defects.

• 한국수소및신에너지학회논문집
• /
• 제15권2호
• /
• pp.119-128
• /
• 2004

DME(Dimethyl Ether) was directly produced from the synthesis gas using the slurry phase reactor. The catalyst for DME production prepared two types (A type; Cu:Zn:Al=57:33:10, B type; Cu:Zn:Al=40:45:15, molar ratio). It was evaluated for the effect of the reaction medium oil using the small size slurry phase reactor. DME production yield and the methanol selectivity decreased in the order: n-hexadecane oil> mineral oil> therminol oil. The long-term test of DME production was carried out using A and B type catalyst, and n-hexadecane oil and mineral oil, respectively. It was confirmed that the use of A type for the catalyst and n-hexadecane for the reaction medium oil was very useful for the viewpoint of the DME production form the synthesis gas.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제1권3호
• /
• pp.163-174
• /
• 2014

The objective of this study is to prepare an artificial extracellular matrix (ECM) for cell culture by using polymer hydrogels. The polymer used is a cytocompatible water-soluble phospholipid polymer: poly[2-methacryloyloxyethyl phosphorylcholine (MPC)-n-butyl methacrylate-p-nitrophenyloxycarbonyl poly(ethylene oxide) methacrylate (MEONP)] (PMBN). The hydrogels are prepared using a cross-linking reaction between PMBN and diamine compounds, which can easily react to the MEONP moiety under mild conditions. The most favorable diamine is the bis(3-aminopropyl) poly(ethylene oxide) (APEO). The effects of cross-linking density and the chemical structure of cross-linking molecules on the mechanical properties of the hydrogel are evaluated. The storage modulus of the hydrogel is tailored by tuning the PMBN concentration and the MEONP/amino group ratio. The porous structure of the hydrogel networks depends not only on these parameters but also on the reaction temperature. We prepare a hydrogel with $40-50{\mu}m$ diameter pores and more than 90 wt% swelling. The permeation of proteins through the hydrogel increases dramatically with an increase in pore size. To induce cell adhesion, the cell-attaching oligopeptide, RGDS, is immobilized onto the hydrogel using MEONP residue. Bovine pulmonary artery endothelial cells (BPAECs) are cultured on the hydrogel matrix and are able to migrate into the artificial matrix. Hence, the RGDS-modified PMBN hydrogel matrix with cross-linked APEO functions as an artificial ECM for growing cells for applications in tissue engineering.

• Animal Systematics, Evolution and Diversity
• /
• 제24권1호
• /
• pp.81-88
• /
• 2008

Two oxytrichid ciliates collected from the mosses and estuarine littoral in Korea were identified as Oxytricha longigranulosa Berger and Foissner, 1989 and O. marina Kahl, 1932. These species are reported for the first time from Korea. The description was based on living and protargol impregnated specimens. Diagnostic characters for each species are as follows. Oxytricha longigranulosa: Cell in vivo $80-115{\times}30-50{\mu}m$, mostly $90{\times}40{\mu}m$. Length/width ratio about 2.4/1. Cortical granules about $1{\times}1.5{\mu}m$ in size, colorless, arranged in short and discontinued longitudinal rows. Four frontoventral cirri. Adoral zone of membrane lies (AZM) covering 30-50% of cell length with 25-27 adoral membranelles (AM). Buccal area flat, typical Oxytricha pattern. Five transverse cirri, 19-23 right marginal cirri, 19-24 left marginal cirri, three caudal cirri, five dorsal kineties. Two macronuclear nodules 2 in number and spherical in shape, two micronuclei in number. Oxytricha marina: Cell in vivo $100-150{\times}30-60{\mu}m$. Cytoplasm colorless without cortical granules. Four frontoventral cirri. AZM covering 50% of cell length with 28-44 AMs, Buccal area flat, typical Oxytricha pattern. Five transverse cirri, 23-38 right marginal cirri, 19-25 left marginal cirri, three caudal cirri, five dorsal kineties. Two macronuclear nodules and spherical in shape, 1-5 micronuclei, mostly two in number.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권8호
• /
• pp.1110-1118
• /
• 2018

Objective: This study was intended to identify genes positively selected in Thoroughbred horses (THBs) that potentially contribute to their running performances. Methods: The genomes of THB and Jeju horses (JH, Korean native horse) were compared to identify genes positively selected in THB. We performed cross-population extended haplotype homozygosity (XP-EHH) and cross-population composite likelihood ratio test (XP-CLR) statistical methods for our analysis using whole genome resequencing data of 14 THB and 6 JH. Results: We identified 98 (XP-EHH) and 200 (XP-CLR) genes that are under positive selection in THB. Gene enrichment analysis identified 72 gene ontology biological process (GO BP) terms. The genes and GO BP terms explained some of THB's characteristics such as immunity, energy metabolism and eye size and function related to running performances. GO BP terms that play key roles in several cell signaling mechanisms, which affected ocular size and visual functions were identified. GO BP term Eye photoreceptor cell differentiation is among the terms annotated presumed to affect eye size. Conclusion: Our analysis revealed some positively selected candidate genes in THB related to their racing performances. The genes detected are related to the immunity, ocular size and function, and energy metabolism.

• 한국산학기술학회논문지
• /
• 제16권5호
• /
• pp.2979-2984
• /
• 2015

본 연구에서는 발포제를 이용하여 형성된 기공을 확대하는 방식의 공정으로써, 선택적 하이브리드 구조의 폴리머 필름의 제작을 위한 새로운 발포기술을 제시하였다. 기존의 발포제만을 이용한 폐쇄형 기공보다 큰 기공을 형성하기 위해서 PP에 발포제와 구리분말(Copper powder)을 혼합하여 만든 필름 내부에 355nm파장의 UV 펄스레이저를 이용하여 LAMO(Laser Aided Micro pore Opening) 공정 방식을 통한 기공의 크기를 확장하는 실험을 진행하였다. 그 결과 발포공정만 수행된 기공의 크기보다 추가적인 LAMO 공정을 통해 형성된 기공의 크기가 훨씬 더 크게 관찰되었다. 본 실험의 결과를 통해 LAMO 공정에 의한 기공의 특성과의 상관관계를 파악할 수 있었으며, 기존의 UV laser를 이용하여 원하는 부위에 선택적으로 폐쇄형 기공을 형성하는 것 이상으로 기공의 크기를 제어하는 방안을 제시하고자 한다.

• Ocean and Polar Research
• /
• 제32권3호
• /
• pp.247-254
• /
• 2010

Single cell PCR analysis and light and scanning electron microscopic techniques were utilized to identify free living bivalve larvae in the coastal waters of Tae-an, on the west coast of Korea. Through DNA sequencing, venerid clam larvae were isolated and identified as Ruditapes philippinarum (99% similarity) and Meretrix lusoria (99%). Under microscopic observation, the D-veliger stage of R. philippinarum exhibited symmetrical shoulder angles and an elliptical ventral form. In contrast, M. lusoria displayed asymmetrical shoulder angles and a round ventral form in the umbonal stage. Size of the R. philippinarum larvae was $156{\pm}22{\mu}m$ in length, $126{\pm}12{\mu}m$ in height, $92{\pm}14{\mu}m$ in width with a length: height ratio of 1.23. Meretrix lusoria was $202{\pm}44{\mu}m$ in length, $161{\pm}35{\mu}m$ in height, $96{\pm}38{\mu}m$ in width with a length: height ratio of 1.25. Experimental results indicate that morphological and molecular characteristics provide evidence for the larval identification of these two venerid clam larvae species in nature.