• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.3
• /
• pp.135-139
• /
• 1996

It is difficult to fabricate precise resistors for the analog integrated circuits using MOS technology. Until now polysilicon resistors were used at the analog integrated circuits, but some deviations of resistance and sensitive variation processes still cause their misactions. In order to improve these misactions, we suggest a CMOS resistor cell which provides precise resistance and excellant linearity. Also we designed the second order active low pass filter using the CMOS resistor cells and verified their superior performances compared to the actual resistors.

• Journal of Industrial Technology
• /
• v.18
• /
• pp.173-180
• /
• 1998

A high speed and stable A/D conversion data process is required to weigh a mass on moving conveyer weighing platter. The paper presents a new method to obtain stable and fast automatic weighing A/D conversion data process. Dynamic weighting system which is constructed with dual load cell is realized by the stable A/D conversion data process algorithm using DSP. The proposed method is applied to the real design, and that experimental results showed good performances of the weighing stability.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.5
• /
• pp.259-267
• /
• 2003

In this paper, we propose a nonlinear variable PID controller using a cell-mediated immune response. An immune feedback response is based on the functioning of biological T-cells. An immune feedback response and P-controller of conventional PID controllers resemble each other in role and mechanism. Therefore, we extend immune feedback mechanism to nonlinear PE controller. And in order to choose the optimal nonlinear PID controller games, we also propose the on-line tuning algorithm of nonlinear functions parameters in immune feedback mechanism. The trained parameters of nonlinear functions are adapted to the variations of the system parameters and any command velocity. And the adapted parameters obtained outputs of nonlinear functions with an optimal control performance. To verify performances of the proposed control systems, the speed control of nonlinear BC motor is performed. The simulation results show that the proposed control systems are effective in tracking a command velocity under system variations.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2011

This paper summarized concept, manufacture and results of the micro-tubular solid oxide fuel cells (SOFCs). The cells were fabricated by co-sintering of extruded micro-tubular anode support and electrolyte coating layer, and then additional cathode coating. The cells showed quick voltage rising within 1 minute, and the electrochemical performances were closely related to the balance of fuel utilization and performance loss. And a thermal-fluid simulation model was also reported in combination with the electrochemical evaluation results on the GDC-based micro-tubular SOFCs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.502-505
• /
• 2003

We synthesized high thermal photoalignment material with hydroxyl aromatic polyimide, and studied the liquid crystal (LC) aligning capabilities on the photopolymer layers. Also, electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure were investigated. A good LC alignment with UV exposure on the photopolymer surface can be obtained. However, the low pretilt angles were obtained below $1^{\circ}$. The Voltage-transmittance (V-T) curve without backflow bounce in the photoaligned TN cell with UV exposure was observed. The response time of photoaligned TN cell was measured about 24 ms.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.477-480
• /
• 2003

We investigated the electro-optical (EO) performances of the super twisted nematic liquid crystal display (STN-LCD) on the polyimide (PI) surface using polymer film. Monodomain alignment of the plastic STN-LCD can be observed. A stable voltage-transmittance (V-T) curve of the plastic STN-LCD was observed on the polyimide (PI) surfaces using polymer film. Also, a faster response time for the plastic STN-LCD on the polyimide (PI) surfaces using polymer film can be achieved. However, the transmittance of the plastic STN-LCD on the polyimide (PI) surfaces using polymer film decreased greatly as cell gap decreases.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1717-1718
• /
• 2005

Zn/Air 전지는 방전하는 동안에 최종 방전 cut-off 전압에 이르기까지 평탄한 voltage profile의 전기화학적 특성을 보여준다. Air cathode 전극의 경우, 전극의 porosity에 따라 특성변화에 큰 영향을 가지는 것으로 보이며 이의 비교연구를 위해 사용되어지는 활성탄의 종류를 달리함으로써 이러한 인자의 영향을 이해하고자 하였다. 이러한 인자연구는 discharge voltage, specific capacity, 및 energy 등의 연구결과를 바탕으로 고찰되어졌으며 결과적으로 공기 유로를 통한 산소의 원활한 공급 여부가 주요 원인인 것으로 여겨진다.

• Membrane Journal
• /
• v.12 no.1
• /
• pp.1-7
• /
• 2002

Currently, the commercialized cation exchange membranes have the excellent performance and stability, however their costs are very expensive and they are not still optimized for the several application areas. A number of membranenologists are focused to solve the problems on the development of novel membrane to be applicable to each membrane field. The present will deal with the introduction of the existing membrane materials and their performances.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.752-754
• /
• 2014

With the rapid development of the portable devices such as laptops, cell phones, digital devices, the important of the secondary battery is increasing. In recent years, semiconductor industries, display technologies, and secondary batteries are believed to be three core business. In particular, smart phones have higher performances, but secondary batteries are not follow the trends. Recently, the stability problem by battery heat is raised. In this paper, we survey technology trends of the secondary battery and protection circuit.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.42-48
• /
• 2006

In this paper a joint detection method for other cell interference cancellation is proposed in the next generation hybrid TD-CDMA mobile communication systems. A joint detection technique, a most characteristic feature of hybrid TD-CDMA mobile communication systems. retrieves users' data in the same time slot simultaneously with the elimination of multiple user interference. Previously a two stage joint detection method was proposed to cancel other cell interference as well as multiple user interference in the target cell. However the previous scheme does not have concrete ways to recognize other cell users who give major interference to the target cell. Thus all users in neighbor other cells has to be jointly detected and it causes huge complexity of the two stage joint detection. In this paper a method is proposed to perform two stage joint detection according to users' interference with the target cell. Performances of the proposed scheme are investigated through simulations and compared to the previous method the proposed method has no performance degradation and also lower the complexity of two stage joint detection significantly.