• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.149-152
• /
• 2012

This paper describes the study of integrated hydrogen supply system for environment friendly propulsion systems of fuel-cell UAV. Diluted hydrochloric acid was used for direct-decomposing solid-state $NaBH_4$ and generating hydrogen. Self-hydrogen pressurized reactor and pressure regulator was introduced for stable hydrogen supply. Prototype of integrated hydrogen supply systems using the solid-state $NaBH_4$ direct-decomposition was designed for performance evaluation and concept demonstration.

• BMB Reports
• /
• v.42 no.6
• /
• pp.344-349
• /
• 2009

Angiogenesis is crucial for solid tumor growth. By secreting angiogenic factors, tumor cells induce angiogenesis. However, targeting these angiogenic factors for cancer therapy is not always successful, suggesting that other factors may be involved in tumor angiogenesis. This work shows that 25 protein spots were differentially expressed by two-dimensional gel electrophoretic analysis when HepG2 cells induced endothelial cell differentiation to tube in vitro, and most of them were upregulated. Twenty-one proteins were identified with MALDITOF-MS, and the other four were identified by LTQ-MS/MS. Keratins were identified as one class of these upregulated proteins. Further study indicated that the expression of keratin 17 in cultured endothelial cells is likely microenvironment regulated, because its expression can be induced by HepG2 cells and bFGF as well as serum in culture media. Increased expression of keratins in endothelial cells, such as keratin 17, may contribute to the angiogenesis induced by HepG2 cells.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.159-169
• /
• 2004

In this study, integration control of air-cell seat and semi-active suspension is proposed to minimize the road-tyre force which can cause uncomfortable feeling to rider. The proposed integration control with sliding perturbation observer is consisted of air-cell seat control which uses the force generated by air-cell and the sky-hook control. The air-cell seat itself has been modeled as a 1 degree of freedom spring-damper system. The actual characteristics of the air-cell have been analyzed through experiments. In this paper, we introduces a new robust motion control algorithm using partial state feedback for a nonlinear system with modelling uncertainties and external disturbances. The major contribution of this work is the development and design of robust observer for the state and the perturbation. The combination skyhook controller and air-cell controller using the observer improves control performance, because of the robust routine called Sliding Observer Design for Integration Control of Air-Cell Seat and Semi-active Suspension. The simulation results show a high accuracy and a good performance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.945-948
• /
• 2002

We studied electro-optical (EO) performances of a vertical-alignment (VA)-in plane switching (IPS) cell on a photopolymer surfaces. The VA-IPS cell, dark in voltage-off state, reveals bright uniformity in all directions due to the dual domainlike dierector configuration in the voltage-on state. For voltage-transmittance (V-T) measurement, the transmittance characteristics of the VA-IPS cell on the photopolymer surface was better than that of the VA-IPS cell on a polyimide(PI) surface.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.3
• /
• pp.263-268
• /
• 2012

It is important to know the mechanism of cell membrane fluctuation because it can be readout for the nanomechanical interaction between cytoskeleton and plasma membrane. Traditional techniques, however, have drawbacks such as probe contact with the cell surface, complicate analysis, and limit spatial and temporal resolution. In this study, we developed a new system for non-contact measurement of nano-scale localized-cell surface dynamics using modified-scanning ion-conductance microscopy. With 2 nm resolution, we determined that endothelial cells have local membrane fluctuations of ~20 nm, actin depolymerization causes increase in fluctuation amplitude, and ATP depletion abolishes all membrane fluctuations.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.447-448
• /
• 2013

This paper investigates a new approach based on the fuzzy-logic controlled methodology that is suitable for analyzing and evaluating large format $LiMn_2O_4$ cell performance via online state-of-health (SOH) estimation for energy storage system (ESS) applications. First of all, the values of the cell resistance R and maximum cell capacity $Q_{max}$ are calculated from three factors such as voltage, current, and time that were measured by discharging/charging sequence. Then, using two values R and $Q_{max}$ previously calculated, present SOH of an arbitrary $LiMn_2O_4$ cell can be estimated using the defined fuzzy-logic inference system. The main advantage of this approach is wide parameters tuning possibility for good correspondence of SOH decay with other accurate estimation method and the possibility to perform suitable online SOH estimation.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.29-38
• /
• 2017

This paper presents a study on the state-of-charge (SOC) reference based active cell balancing in real-time. The optimal references of SOC are determined by using the proposed active cell balancing system with the bidirectional DC/DC converters via the dual active bridge (DAB) type. Then, the energies between cells can be balanced by the power flow control of DAB based bidirectional DC/DC converters. That is, it provides the effective management of battery by transferring energy from the strong cell to the weak one until the cell voltages are equalized to the same level and therefore improving the additional charging capacity of battery. In particular, the cell aging of battery and power loss caused from energy transfer are considered. The performances of proposed active cell balancing system are evaluated by an electromagnetic transient program (EMTP) simulation. Then, the experimental prototype is implemented in hardware to verify the usefulness of proposed system.

• Korean Journal of Materials Research
• /
• v.28 no.6
• /
• pp.330-336
• /
• 2018

In this study, a membrane electrode assembly(MEA) composed of three electrodes(anode, cathode, and reference electrode) is designed to investigate the effects of methanol concentration on the overpotentials of anode and cathode in direct methanol fuel cells(DMFCs). Using the three-electrode cell, in-situ analyses of the overpotentials are carried out during direct methanol fuel cell operation. It is demonstrated that the three-electrode cell can work effectively in transient state operating condition as well as in steady-state condition, and the anode and cathode exhibit different overpotential curves depending on the concentration of methanol used as fuel. Therefore, from the real-time separation of the anode and cathode overpotentials, it is possible to more clearly prove the methanol crossover effect, and it is expected that in-situ analysis using the three-electrode cell will provide an opportunity to obtain more diverse results in the area of fuel cell research.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.411-417
• /
• 1994

The electro-optic polarization transmission characteristics of a liquid crystal (LC) cell is represented by a rotational transformation on the Poincare sphere, and its characteristic parameters, the angle and the axis of the rotation, are experimentally determined with respect to the voltage applied to the LC cell. From the experimental data obtained, we determine driving voltage for the LC cell to give the rotation angle near $180^{\circ}$ of the rotation for the change of the state of the LC cell from non-select to select state, which is a necessary condition for the realization of maximally bright images. The directions of the transmission axes of the polarizer and the analyzer which form a liquid crystal display panel together with the LC cell, are determined from the general characteristics of the rotaional transformation of the LC cell. cell.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.150-155
• /
• 1997

Modelling and Simulation of the activation process for the myocardium is meaningful to understand special excitation conduction system in the heart and to study cardiac functions. In this paper, we propose two dimensional cellular automata model for the activation process of the myocardium and simulated by means of discrete time and discrete event algorithm. In the model, cells are classified into anatomically similar characteristic parts of heart; SA node, internodal tracks, AV node, His bundle, bundle branch and four layers of the ventricular muscle, each of which has a set of cells with preassigned properties, that is, activation time, refractory duration and conduction time between neighbor cell. Each cell in this model has state variables to represent the state of the cell and has some simple state transition rules to change values of state variables executed by state transition function. Simulation results are as follows. First, simulation of the normal and abnormal activation process for the myocardium has been done with discrete time and discrete event formalism. Next, we show that the simulation results of discrete time and discrete event cell space model is the same. Finally, we compare the simulation time of discrete event myocardium model with discrete time myocardium models and show that the discrete event myocardium model spends much less simulation time than discrete time myocardium model and conclude the discrete event simulation method Is excellent in the simulation time aspect if the interval deviation of event time is large.