• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.5
• /
• pp.367-372
• /
• 2020

As packaging processes for atomic gyroscope vapor cells, the glass tube tip-off process, anodic bonding, and paste sealing have been widely studied. However, there are stability issues in the alkali metal which are caused by impurity elements and leakage during high-temperature processes. In this study, we investigated the applicability of a vapor cell low-temperature packaging process by depositing Au on a Pyrex cell in addition to forming an Au-Sn thin film on a cap to cover the cell, followed by laser irradiation of the Au/Au-Sn interface. The mechanism of the thin film bonding was evaluated by XRD, while the packaging reliability of an Ne gas-filled vapor cell was characterized by variation of plasma discharge behavior with time. Furthermore, we confirmed that the Rb alkaline metal inside the vapor cell showed no color change, indicating no oxidation occurred during the process.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.344-346
• /
• 2009

Cell type packaging line is more suitable for the products with various models and small quantities like mobile phone or mp3 player than conveyor type packaging line. Cell type packaging line is applicable to package various product models, but it can cause wrong product compositions and missing of items. So, automatic missing item detection system is needed. We designed an missing item detection system with a bar code reader, infrared sensors, and s digital camera. and also developed the programs for sensor data acquisition, image data processing, GUI, and data management.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.24
• /
• pp.10937-10941
• /
• 2015

Pathogenesis of lung cancer is a complicated biological process including multiple genetic and epigenetic changes. Since cigarette smoking is confirmed as the most main risk factor of non-small cell lung cancer (NSCLC), the aim of this study was to determine whether tobacco exposure plays a role in gene methylation. Methylation of the RAR-${\beta}$ gene were detected using methylation-specific polymerase chain reaction in DNA from 167 newly diagnosed cases with NSCLC and corresponding 105 controls. A significant statistical association was found in the detection rate of the promoter methylation of RAR-${\beta}$ gene between NSCLC and controls ($x^2$=166.01; p<0.01), and hypermethylation of the RAR-${\beta}$ gene was significantly associated with smoking status (p=0.038, p<0.05). No relationship was found between RAR-${\beta}$ gene methylation and pathologic staging including clinical stage, cell type, gender and drinking (p>0.05), and the methylation of RAR-${\beta}$ gene rate of NSCLC was slightly higher in stages III+IV (80.0%) than in I+II (70.8%). Similar results were obtained for methylation of the RAR-${\beta}$ gene between squamous cell carcinoma (77.9%) and other cell type lung cancer (73.9%). These results showed that the frequency of methylation increased gradually with the development of clinical stage in smoking-associated lung cancer patients, and tobacco smoke may be play a potential role in RAR-${\beta}$ gene methylation in the early pathogenesis and process in lung cancer, particularly squamous cell carcinoma. Aberrant promoter methylation is considered to be a promising marker of previous carcinogen exposure and cancer risk.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.11a
• /
• pp.137-140
• /
• 2000

• Korean Journal of Microbiology
• /
• v.26 no.2
• /
• pp.101-105
• /
• 1988

6M-MuLV mutants containing deldtions around the putative packaging signal were constructed by using recombinant DNA technique and transfected into NIH/3T3 cell. 2 of 6 mutants can not be packaged into virions even in the presence of the wild type helper virus. The boundary between the packagible and the non-packagible genome is located around Pvu I site, 421 nucleotide downstream from the 5' end of M-MuLV genome. 10 base pair inverted repeat sequence (GAGUCCAAAA) which can make stem structure around Pvu Isite could be the putative packaging signal.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.226-229
• /
• 2003

본 논문은 Wireless LAN 주파수 대역$(5725\~5825\;MHz)$에서의 다차원패턴기술(Photonic Band Gap : PBG)을 이용한 Yagi-Uda 안테나와 결합하여 광대역 마이크로스트립 패치 안테나를 구현 하였으며, PBG Cell을 이용한 안테나와 이용하지 않은 안테나를 비교 분석하였다. PBG 구조를 적용한 안테나에서의 대역폭이 약 30 MHz 정도 더 넓게 나왔으며, 안테나의 이득은 -1dB정도 더 낮게 나왔는데 이는 Ground 면에 2차원적인 PBG Cell을 적용한 효과 때문으로 분석된다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1108-1109
• /
• 2008

To survive in outdoor environments, photovoltaic modules rely on packaging materials to provide requisite durability. We analyzed the properties of encapsulant materials that are important for photovoltaic module packaging. Recently, the thickness of solar cell gets thinner to reduce the quantity of silicon. And the reduced thickness make it easy to be broken while PV module fabrication process. Solar cell's micro cracks are increasing the breakage risk over the whole value chain from the wafer to the finished module, because the wafer or cell is exposed to tensile stress during handling and processing. This phenomenon might make PV module's maximum power and durability down. So, when using thin solar cell for PV module fabrication, it is needed to optimize the material and fabrication condition which is quite different from normal thick solar cell process. Normally, gel-content of EVA sheet should be higher than 80% so PV module has long term durability. But high gel-content characteristic might cause micro-crack on solar cell. In this experiment, we fabricated several specimen by varying curing temperature and time condition. And from the gel-content measurement, we figure the best fabrication condition. Also we examine the crack generation phenomenon during experiment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.451-452
• /
• 2013

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.2
• /
• pp.33-37
• /
• 2003

The new textured surface epitaxial base(TSEB) cell as a high efficiency Si solar cell was fabricated and its eletro-optical characteristics were investigated. The fabricated device showed the open circuit voltage of 0.62 V, the short circuit current of 40 mA, the fill factor of 0.7, and the efficiency of 16% under the incident light of AM-1 100 mW/$cm^2$. The TSEB cell proposed in this paper has the structural superiority in the fabrication of high efficiency solar cell due to the carrier drift transport in the optical absorption region and the formation of back surface field by $P^-/P^+$ epitaxial base, and the low emitter series resistance by insertion of $n^+$ buried contact.

• Food Engineering Progress
• /
• v.14 no.4
• /
• pp.354-358
• /
• 2010

The methods for determining the diffusion parameters for the diffusion of d-limonene, a major volatile compound of orange juice, through a multi-layered food packaging material and predicting its absorption into the packaging material have been investigated. The packaging material used was the 1.5-mm thick multi-layered packaging material composed of high impact polystyrene (HIPS), polyvinylidene chloride (PVDC), and low density polyethylene (LDPE). Orange juice was placed in a cell where volatiles were absorbed in the sample package and kept at $23{\pm}2^{\circ}C$ for 72 hr. The d-limonene absorbed in a 1.5-mm thick multi-layered food packaging material was analyzed by a solid phase micro-extraction (SPME). The absorption parameters for the absorption of d-limonene in the packaging material were determined and absorption of d-limonene into the packaging material was predicted using absorption storage data. The SPME desorption at $60^{\circ}C$ for 1 hr resulted in the most sensitive and reproducible results. The diffusion coefficients of d-limonene in the packaging material and the partition coefficient at $23{\pm}2^{\circ}C$ were approximately $1-2{\times}10^{12}m^2$/s and 0.03, respectively. The absorption profile no earlier than 30 hr was fit well by a model derived from the Fick's law.