• 해양환경안전학회지
• /
• 제20권5호
• /
• pp.504-510
• /
• 2014

본 연구에서는 2014년 03월에 인천 H항의 5개 정점(S1~S5)에서 채취된 표층 퇴적물의 물리화학적 특성을 조사하고, COD, AVS, IL 및 중금속(Cd, Cu, Ni, Pb, Zn, Cr, Hg)을 분석하여 오염도를 평가하였다. 입도분석, 비표면적분석, XRD 및 XRF 분석을 통하여 채취된 퇴적물 시료 모두 거의 동일한 산화물과 광물로 구성되었음을 확인하였다. 국내기준으로 COD, AVS 및 IL 세 항목의 총점에 대한 오염도는 S2, S3, S5 지점은 2등급으로 S1, S4 지점은 3등급으로 평가되었다. 중금속 오염의 경우 Cd, Ni, Pb은 USEPA 기준으로 중간오염에 해당하였고, Cu, Zn 및 Cr은 심한오염으로 분류되었다. 농집지수를 이용한 오염도 평가결과 Cd가 Class 3으로 평가되었고, 농축계수를 이용한 평가결과 모든 지점에서 Cd, Pb, Zn의 경우 1보다 큰 것으로 나타났다. 또한 총농축계수는 S4지점이 3.1로 가장 높은 것으로 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.304-308
• /
• 2004

The $Cd_{1-x}Zn_xS$ thin films were grown on the Si(100) wafers by a hot wall epitaxy method(HWE). The source and substrate temperature are $600^{\circ}C\;and\;440^{\circ}C$ respectively. The crystalline structure of epilayers was investigated by double crystal X-ray diffraction(DCXD). Hall effect on the sample was measured by the van der Pauw method and studied on the carrier density and mobility dependence on temperature. In order to explore the applicability as a photoconductive cell, we measured the sensitivity($\gamma$), the ratio of photocurrent to darkcurrent(pc/dc), maximum allowable power dissipation(MAPD), spectral response and response time. The results indicated that the photoconductive characteristic were the best for the $Cd_{0.53}Zn_{0.47}S$ samples annealed in Cu vapor compare with in Cd, Se, air and vacuum vapour. Then we obtained the sensitivity of 0.99, the value of pc/dc of $1.65{\times}10^7$, the MAPD of 338mW, and the rise and decay time of 9.7ms and 9.3ms, respectively

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.399-399
• /
• 2011

본 논문에서는 Indium tin oxide (ITO) 투명전극의 성장온도($T_G$)가 Cu(In,Ga)$Se_2$ (CIGS) 박막태양전지에 미치는 영향을 살펴 보았다. ITO 박막은 radio-frequency magnetron sputtering을 이용하여 상온에서 $350^{\circ}C$까지의 다양한 $T_G$ 조건에서 i-ZnO/ glass와 i-ZnO/CdS/CIGS/Mo/glass 기판에 증착되었다. ITO의 비저항과 CdS/CIGS 계면 특성은 $T_G$에 크게 영향을 받았다. $T_G{\leq}200^{\circ}C$에서는 $T_G$가 증가할수록 ITO 저항이 감소하였고 이에 따른 series 저항 감소가 태양전지 성능 향상에 기여하였다. 하지만 $T_G$ > $200^{\circ}C$에서는 CdS 버퍼층의 Cd이 CIGS 층으로 확산되어 소자의 p-n 계면이 파괴되는 것을 발견하였다. $T_G=200^{\circ}C$에서 ITO를 증착한 CIGS 태양전지의 경우 가장 높은 광전변환효율을 보였다.

• 한국결정학회지
• /
• 제9권1호
• /
• pp.53-63
• /
• 1998

HWE 방법에 의해 Cd1-xZnxS 박막을 (100)방향을 Si 기판 위에 성장시켰다. 증발원과 기판의 온도를 각각 600℃, 440℃로 하여 성장시킨 Cd1-xZnxS 박막의 이중 결정 X-선 요동곡선(DCRC)의 반폭치(FWHM)값이 265 arcsec로 가장 작았다. Van der Pauw 방법으로 Hall효과를 측정하여 운반자 농도와 Hall 이동도의 온도 의존성을 조사하였다. 광전도 셀의 특성으로 spectral response, 최대 허용소비전력(MAPD), 광전류와 암전류(pc/dc)의 비 및 응답시간을 측정하였다. Cd0.53Zn0.47S광전도 셀을 Cu증기 분위기에서 열처리한 경우 감도(γ)는 0.99, pc/dc은 1.65 ×10 7 그리고 최대 허용소비전력(MAPD)은 338mW, 오름시간 (rise time)은 9.7ms, 내림시간(decay time)은 9.3ms로 가장 좋은 광전도 특성을 얻었다.

• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.6-10
• /
• 2020

The silver nanowires (AgNWs) were synthesized by the conventional polyol process, which revealed 25 ㎛ and 30 nm of average length and diameter, respectively. The synthesized AgNWs were applied to the CdSe/CdZnS quantum dot (QD) based transparent light-emitting device (LED). The device using a randomly networked AgNWs electrode had some problems such as the high threshold voltage (for operating the device) due to the random pores from the networked AgNWs. As a method of improvement, a composite electrode was formed by overlaying the ZnO:Ga on the AgNWs network. The device used the composite electrode revealed a low threshold voltage (4.4 Vth) and high current density compared to the AgNWs only electrode device. The brightness and current density of the device using composite electrode were 55.57 cd/㎡ and 41.54 mA/㎠ at the operating voltage of 12.8 V, respectively, while the brightness and current density of the device using (single) AgNWs only were 1.71 cd/㎡ and 2.05 mA/㎠ at the same operating voltage. The transmittance of the device revealed 65 % in a range of visible light. Besides the reliability of the devices was confirmed that the device using the composite electrode revealed 2 times longer lifetime than that of the AgNWs only electrode device.

• 전자공학회논문지
• /
• 제51권8호
• /
• pp.167-171
• /
• 2014

평판 디스플레이(plate panel display)가 휴대용으로 발전하면서 박막화, 고색재현성, 고휘도에 관한 연구가 활발히 이루어지고 있으며, 광원으로써 LED, OLED가 주로 이용되고 있다. 이러한 광원의 소재로 양자점에 관한 연구가 많이 이루어 지고 있는데, 양자점은 고색재현성과 유연디스플레이 구현에 있어서 주목받는 차세대 반도체 나노형광체 이다. 본 연구에서는 평판 디스플레이를 구현함에 있어서 양자점을 이용하는 방법에 관하여 제시하였다. CdSe/ZnS 양자점을 PET베리어 필름에 $100{\mu}m$ 두께로 도포하고 455nm의 파장을 갖는 청색 LED를 광원으로하여 빛을 조사하는 디바이스를 제작하고 광특성을 평가하였으며, LCD의 색변환 필름으로써 양자점의 적용 가능성을 제시하였다.

• Toxicological Research
• /
• 제29권1호
• /
• pp.35-42
• /
• 2013

Quantum dots (QDs) have received considerable attention due to their potential role in photosensitization during photodynamic therapy. Although QDS are attractive nanomaterials due to their novel and unique physicochemical properties, concerns about their toxicity remain. We suggest a combination strategy, CdSe/ZnS QDs together with curcumin, a natural yellow pigment from turmeric, to reduce QD-induced cytotoxicity. The aim of this study was to explore a potentially effective cancer treatment: co-exposure of HL-60 cells and human normal lymphocytes to CdSe/ZnS QDs and curcumin. Cell viability, apoptosis, reactive oxygen species (ROS) generation, and DNA damage induced by QDs and/or curcumin with or without ultraviolet A (UVA) irradiation were evaluated in both HL-60 cells and normal lymphocytes. In HL-60 cells, cell death, apoptosis, ROS generation, and single/double DNA strand breaks induced by QDs were enhanced by treatment with curcumin and UVA irradiation. The protective effects of curcumin on cell viability, apoptosis, and ROS generation were observed in normal lymphocytes, but not leukemia cells. These results demonstrated that treatment with QD combined with curcumin increased cell death in HL-60 cells, which was mediated by ROS generation. However, curcumin acted as an antioxidant in cultured human normal lymphocytes.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.35.1-35.1
• /
• 2010

The Cu(In,Ga)Se2(CIGS) thin film solar cells have been achieved until almost 20% efficiency by NREL. These solar cells include chemically deposited CdS as buffer layer between CIGS absorber layer and ZnO window layer. Although CIGS solar cells with CdS buffer layer show excellent performance, many groups made hard efforts to overcome its disadvantages in terms of high absorption of short wavelength, Cd hazardous element. Among Cd-free candidate materials, the CIGS thin film solar cells with Zn compound buffer layer seem to be promising with 15.2%(module by showa shell K.K.), 18.6%(small area by NREL). However, few groups were successful to report high-efficiency CIGS solar cells with Zn compound buffer layer, compared to be known how to fabricate these solar cells. Each group's chemical bah deposition (CBD) condition is seriously different. It may mean that it is not fully understood to grow high quality Zn compound thin film on the CIGS using CBD. In this study, we focused to clarify growth mechanism of chemically deposited Zn compound thin film on the CIGS, especially. Additionally, we tried to characterize junction properties with unfavorable issues, that is, slow growth rate, imperfect film coverage and minimize these issues. Early works reported that film deposition rate increased with reagent concentration and film covered whole rough CIGS surface. But they did not mention well how film growth of zinc compound evolves homogeneously or heterogeneously and what kinds of defects exist within film that can cause low solar performance. We observed sufficient correlation between growth quality and concentration of NH3 as complex agent. When NH3 concentration increased, thickness of zinc compound increased with dominant heterogeneous growth for high quality film. But the large amounts of NH3 in the solution made many particles of zinc hydroxide due to hydroxide ions. The zinc hydroxides bonded weakly to the CIGS surface have been removed at rinsing after CBD.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.417-417
• /
• 2012

For desired optical properties of QDs, it is very important to reduce the presence of defects on their surfaces. Passivation of surface defects using larger band gap materials is the most effective way. Some groups successfully synthesized Cd based multi-shell structured quantum dots and improved its optical properties. However, its productivity has limit because of the amounts of glass ware and space. In this research, we try to synthesize Cd based multi-shell structured nanocrystal quantum dots to overcome demerits of conventional batch synthetic method. This reactor composed pump, SUS reaction part (3.2 mm stainless steel and furnace) and batch mixer. We successively synthesized CdSe/CdS/ZnS quantum dot at this reactor in one step.

• 한국전기전자재료학회논문지
• /
• 제25권8호
• /
• pp.657-663
• /
• 2012

The spherical mesoporous silica is synthesized and incorporated with CdSe/ZnS quantum dots(QDs) for preparing micro beads to detect toxic and bio-materials with high sensitivity. The spherical silica beads with the brunauer-emmett-telle(BET) average pore size of 15 nm were prepared with a ratio 1, 3, 5-trimethylbenzen, as a swelling agent, to the block-copolymer template surfactant of over 1 and under vigorous mixing condition. The surface of spherical mesoporous silica is modified using octadecylsilane for incorporating QDs. Based on photoluminescence(PL) spectra, the relative brightness of mesoporous silica beads incorporated with 10 nM of QDs is 79,000 times brighter than that of Rodamine 6 G.