• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.2797-2801
• /
• 2023

CdZnTeSe (CZTS) has attracted attention for applications in X- and gamma-ray detectors owing to its improved properties compared to those of CdZnTe (CZT). In this study, we grew and processed single crystals of CZT and CZTS using the Bridgeman method to confirm the feasibility of using a dosimeter for high-energy X-rays in radiotherapy. We evaluated their linearity and precision using the coefficient of determination (R²) and relative standard deviation (RSD). CZTS showed sufficient RSD values lower than 1.5% of the standard for X-ray dosimetry, whereas CZT's RSD values increased dramatically under some conditions. CZTS exhibited an R² value of 0.9968 at 500 V/cm, whereas CZT has an R² value of 0.9373 under the same conditions. The X-ray response of CZTS maintains its pulse shape at various dose rates, and its properties are improved by adding selenium to the CdTe matrix to lower the defect density and sub-grain boundaries. Thus, we validated that CZTS shows a better response than CZT to high-energy X-rays used for radiotherapy. Further, the applicability of an onboard imager, a high-energy X-ray (>6 MV) image, is presented. The proposed methodology and results can guide future advances in X-ray dose detection.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03b
• /
• pp.40-40
• /
• 2010

CdSe nanocrystals (NCs) have been decorated on singlewalled carbon nanotubes (SWCNTs) by combining a method of chemically modified substrate along with gate-bias control. CdSe/ZnS core/shell quantum dots were negatively charged by adding mercaptoacetic acid (MAA). The silicon oxide substrate was decorated by octadecyltrichlorosilane (OTS) and converted to hydrophobic surface. The negatively charged CdSe NCs were adsorbed on the SWCNT surface by applying the negative gate bias. The selective adsorption of CdSe quantum dots on SWCNTs was confirmed by confocal laser scanning microscope. The measured photocurrent clearly demonstrates that CdSe NCs decorated SWCNT can be used for photodetector and solar cell that are operable over a wide range of wavelengths.

• Journal of Powder Materials
• /
• v.23 no.2
• /
• pp.91-94
• /
• 2016

High-quality colloidal CdSe/ZnS (core/shell) is synthesized using a continuous microreactor. The particle size of the synthesized quantum dots (QDs) is a function of the precursor flow rate; as the precursor flow rate increases, the size of the QDs decreases and the band gap energy increases. The photoluminescence properties are found to depend strongly on the flow rate of the CdSe precursor owing to the change in the core size. In addition, a gradual shift in the maximum luminescent wave (${\lambda}_{max}$) to shorter wavelengths (blue shift) is found owing to the decrease in the QD size in accordance with the quantum confinement effect. The ZnS shell decreases the surface defect concentration of CdSe. It also lowers the thermal energy dissipation by increasing the concentration of recombination. Thus, a relatively high emission and quantum yield occur because of an increase in the optical energy emitted at equal concentration. In addition, the maximum quantum yield is derived for process conditions of 0.35 ml/min and is related to the optimum thickness of the shell material.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.337.2-337.2
• /
• 2016

역 구조 유기태양전지는 가격이 저렴하고 우수한 경량성, 간단한 제조공정 그리고 휘어짐이 가능한 소자를 제작할 수 있는 것이 큰 장점이다. 또한, 광활성층과 전극 사이에 표면개질 물질을 도입하여 에너지장벽을 줄임으로써 소자 전반적인 전하수송을 증가시킬 수 있게 되었다. 나아가 용액공정과 저온 공정을 통해 유기 광전자소자의 roll-to-roll 대면적화 기술을 기반으로 가격대비 성능을 개선시켰다. 본 연구에서는 CdSe 또는 CdSe@ZnS 양자점을 표면개질 유기물질인 polyethylenimine ethoxylated (PEIE)에 정전기적 인력의 결합을 통한 양자점 단일층을 얻었고 이는 전기수송층, 광흡수층 그리고 표면플라즈몬 공명(Surface plasmon resornace)의 역할을 수행하게 되면서 태양전지 전반적인 성능 향상을 관찰 할 수 있었고 양자점 단일층으로 인해 20%가 증가된 에너지변환효율 얻었다. 또한 단일층으로 형성된 CdSe 또는 CdSe@ZnS 양자점 은 $F{\ddot{o}}rster$ resonance energy transfer (FRET) 메커니즘을 통해 PC60BM과 P3HT의 Photo luminescence 세기를 99% 감쇄시켰고, CdSe 양자점을 유기 광활성층인 PTB7:PC71BM에 적용하여 8.1%의 수치를 나타내었다.

• Journal of Information Display
• /
• v.13 no.2
• /
• pp.91-95
• /
• 2012

Indium phosphide (InP) quantum dots (QDs) are considered alternatives to Cd-containing QDs for application in light-emitting devices. The multishell coating with ZnSe/ZnS was shown to improve the photoluminescence quantum yield (QY) of InP QDs more strongly than the conventional ZnS shell coating. Structural proof for this system was provided by X-ray diffraction and transmission electron microscopy. QY values in the range of 50-70% along with peak widths of 45-50 nm can be routinely achieved, making the optical performance of InP/ZnSe/ZnS QDs comparable to that of Cd-based QDs. The fabrication of a working electroluminescent light-emitting device employing the reported material demonstrated the feasibility of the desired application.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.309.1-309.1
• /
• 2013

현재까지 CIGS 박막 태양전지는 습식공정인 화학적 용액성장법을 사용하여 형성된 CdS버퍼층을 적용할 경우에 가장 높은 효율을 보이고 있다. 그러나, Cd의 독성 문제와 진공 공정과 호환되지 않는 습식공정 때문에 비독성 건식 공정 버퍼층에 대한 연구가 활발히 진행되고 있다. 습식 공정 CdS 버퍼층을 대체하기 위하여 CdS에 비해 밴드갭이 커서 단파장에서 광 손실이 적은 ZnS 버퍼층을 cracker 황화법을 이용하여 제작하여 CIGS 박막 태양전지에 적용하였다. ZnS 버퍼층을 성장시키기 위해 DC 스퍼터를 사용하여 Zn 박막을 증착한 후, cracker를 사용하여 황화반응을 시켰다. cracker의 cracking zone 온도에 따른 S 반응성을 ZnS 박막의 투과도 변화를 통하여 관찰하였다. 성장된 ZnS 박막은 X-ray diffraction와 Rutherford backscattering spectrometry을 이용하여 박막의 결정성과 조성을 분석하였고, SEM 측정을 통하여 박막의 단면 및 표면 형상을 관찰하였다. 그리고 reflection electron energy loss spectroscopy 분석을 통해 밴드갭을 측정하였다. $700^{\circ}C$의 cracking zone 온도, 3 nm의 Zn 두께, 1 분의 황화공정 조건에서 제작된 ZnS 박막을 CIGS 태양전지의 버퍼층으로 적용한 결과, 반사방지막 없이 12.6%의 변환효율을 얻었다.

• Korean Journal of Materials Research
• /
• v.32 no.11
• /
• pp.481-488
• /
• 2022

The Cu₂ZnSn(S_xSe_1-x)₄ (CZTSSe) absorbers are promising thin film solar cells (TFSCs) materials, to replace existing Cu(In,Ga)Se₂ (CIGS) and CdTe photovoltaic technology. However, the best reported efficiency for a CZTSSe device, of 13.6 %, is still too low for commercial use. Recently, partially replacing the Zn²⁺ element with a Cd²⁺element has attracting attention as one of the promising strategies for improving the photovoltaic characteristics of the CZTSSe TFSCs. Cd²⁺ elements are known to improve the grain size of the CZTSSe absorber thin films and improve optoelectronic properties by suppressing potential defects, causing short-circuit current (J_sc) loss. In this study, the structural, compositional, and morphological characteristics of CZTSSe and CZCTSSe thin films were investigated using X-ray diffraction (XRD), X-ray fluorescence spectrometer (XRF), and Field-emission scanning electron microscopy (FE-SEM), respectively. The FE-SEM images revealed that the grain size improved with increasing Cd²⁺ alloying in the CZTSSe thin films. Moreover, there was a slight decrease in small grain distribution as well as voids near the CZTSSe/Mo interface after Cd²⁺ alloying. The solar cells prepared using the most promising CZTSSe absorber thin films with Cd²⁺ alloying (8 min. 30 sec.) exhibited a power conversion efficiency (PCE) of 9.33 %, J_sc of 34.0 mA/cm², and fill factor (FF) of 62.7 %, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.215-215
• /
• 2014

Red color light emitting diodes (LEDs) were fabricated using CdSe/CdZnS quantum dots (QDs). During the device fabrication process, oxygen plasma treatment on the ITO surface was performed to improve the interfacial contact between ITO anode and the hole injection layer. CdSe/CdZnS quantum dots were cross-linked to remove their surrounded organic surfactants. The device shows red emission at 622 nm, which is consistent with the dimension of the QDs (band gap=1.99 eV). The luminance shows 6026% improvement compared with that of LEDs fabricated without oxygen plasma treatment and quantum dots cross-linking process. This approach would be useful for the fabrication of high-performance QLEDs with ITO electrode and PEDOT:PSS hole injection layers.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.289.1-289.1
• /
• 2014

In this study, we made a organic thin film device in MIS(Metal-Insulator-Semiconductor) structure by using PVP (Poly vinyl phenol) as a insulating layer, and CdSe/ZnS nano particles which have a core/shell structure inside. We dissolved PVP and PMF in PGMEA, organic solvent, then formed a thin film through a spin coating. After that, it was cross-linked by annealing for 1 hour in a vacuum oven at $185^{\circ}C$. We operated FTIR measurement to check this, and discovered the amount of absorption reduced in the wave-length region near 3400 cm-1, so could observe decrease of -OH. Boonton7200 was used to measure a C-V relationship to confirm a properties of the nano particles, and as a result, the width of the memory window increased when device including nano particles. Additionally, we used HP4145B in order to make sure the electrical characteristics of the organic thin film device and analyzed a conduction mechanism of the device by measuring I-V relationship. When the voltage was low, FNT occurred chiefly, but as the voltage increased, Schottky Emission occurred mainly. We synthesized CdSe/ZnS and to confirm this, took a picture of Si substrate including nano particles with SEM. Spherical quantum dots were properly made. Due to this study, we realized there is high possibility of application of next generation memory device using organic thin film device and nano particles, and we expect more researches about this issue would be done.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.369-369
• /
• 2011

양자점 감응형 태양전지는 가시광 영역을 흡수, 이용할 수 있는 광감응 물질로 무기물 양자점을 사용하며, 이 경우 나노미터 크기의 무기물 양자점으로 인한 양자제한 효과 (quantum confinement effect)에 의해 양자점의 사이즈 조절 만으로 밴드갭을 조절할 수 있어 광학적 특성 조절이 용이하며, 하나의 광자를 흡수하여 두개 이상의 전자-정공쌍을 만들 수 있는 (multiple exciton generation) 가능성이 있어 기존 태양전지가 가지는 이론적 한계효율(Shockley-Queisser limit)을 뛰어넘을 수 있다. 본 연구에서는 양자점 및 염료 감응형 태양전지분야에서 가장 많이 사용되고 있는 TiO2 다공성 필름이 아닌, ZnO 나노선 구조를 이용하여 양자점 감응형 태양전지를 제작하였다. ZnO의 경우 TiO2보다 높은 전자이동도를 가지며, 나노선 구조가 바닥전극까지 수직 연결된 1차원의 전자전달경로를 제공하여 결과적으로 광전자 포집에 유리하다. 또한, CdS, CdSe 양자점을 동시에 사용하여 광흡수 범위를 가시광 전 영역으로 확장하였으며, 계단형 밴드구조를 통해 광전자-정공 분리 및 포집을 용이하게 하였다. 더 나아가 전해질의 조성, 나노선의 길이 등 다양한 부분을 조절하면서 각 변수가 소자의 효율에 미치는 영향을 관찰하였다.