• 한국재료학회지
• /
• 제14권4호
• /
• pp.300-306
• /
• 2004

A laser welding has been made between sintered tip of Fe-Co-W and low carbon steel shank for the diamond saw blade. The welding characteristics and formation of defect has been investigated carefully for the weld fusion zone in different welding condition. Full penetration has been observed for the whole range of heat input investigated in the present work. Bead width and under-fill have been increased with the increase of heat input. With increasing of heat input small cavities were decreased while large cavities were increased. The ratio of total cavity area to the entire weld bead area was not changed significantly with change of heat input. Most of cavities were found near the tip, and supposed to be formed from the pore in the tip.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1083-1088
• /
• 2004

Several possibilities on the stability analysis of the railroad tunnels passing through the abandoned mining area are considered in this paper. Previous works on the influence zone due to cavities are investigated to study the effect of the safety deterioration near the cavities which are normally unknown to the engineers. Additional works on the numerical analysis of the influential zone are also performed in 3D space. The praximity of railroad tunnel and unexpected cavities is critical to influence the stability of railroad tunnel under construction. Futhermore, the study on the influence of underground condition like joint and faults should be significantly controlled under both design and construction stage.

• 한국소음진동공학회논문집
• /
• 제23권11호
• /
• pp.1003-1011
• /
• 2013

A new formulation of the MNDIF method is introduced to extract highly accurate eigenvalues of concave acoustic cavities. Since the MNDIF method, which was introduced by the author, can be applicable for only convex acoustic cavities, a new approach of dividing a concave cavity into two convex domains and formulating an algebraic eigenvalue problem is proposed in the paper. A system matrix equation, which gives eigenvalues, is obtained from boundary conditions for each domain and the condition of continuity in the interface between the two domains. The validity and accuracy of the proposed method are shown through example studies.

• Interaction and multiscale mechanics
• /
• 제4권1호
• /
• pp.49-64
• /
• 2011

A methodology for jointed rock mass characterization starts with a research based on geological data and tests in order to define the geotechnical models used to support the decision about location, orientation and shape of cavities. Afterwards a more detailed characterization of the rock mass is performed allowing the update of the geomechanical parameters defined in the previous stage. The observed results can be also used to re-evaluate the geotechnical model using inverse methodologies. Cases of large underground structures modeling are presented. The first case concerns the modeling of cavities in volcanic formations. Then, an application to a large station from the Metro do Porto project developed in heterogeneous granite formations is also presented. Finally, the last case concerns the modeling of large cavities for a hydroelectric powerhouse complex. The finite element method and finite difference method software used is acquired from Rocscience and ITASCA, respectively.

• Advances in materials Research
• /
• 제3권1호
• /
• pp.271-281
• /
• 2014

The presence of cavities in the bone cement has a great importance for the transport of antibiotics, but its existence in this material can lead to its weakening by notch effect. The aim of this study allows providing a physical interpretation to the cavities interconnection by cracks observed experimentally. The most important stress of Von Mises is localized at the cement/bone interface near the free edge which is the seat of stress concentration. The presence and interaction of cavities in this site concentrate, by notch effect, stresses which tend to the tensile fracture stress of Bone cement.

• 지구물리와물리탐사
• /
• 제11권4호
• /
• pp.368-372
• /
• 2008

이 연구는 카르스트 지역에서 발생하는 연약층 또는 지하 석회암 공동의 영상화를 위한 지표 전기비저항 탐사의 유용성을 파악하고자 수행되었다. 연약층 또는 공동은 잠재적인 위험성을 가지고 있으며, 이들은 도로 및 건축물의 붕괴를 야기한다. 따라서 이 연구에서는 이미 지반침하가 있었음이 보고된 바 있는 전남 무안군 영월리에 있는 한 도로를 따라 2-3차원 전기비저항 탐사를 수행하여 지반 침하 현상을 조사하였다. 이 지역의 쌍극자배열 전기비저항 탐사 결과, 풍화된 표토층과 연약층 또는 공동 그리고 기반암이 뚜렷이 구분되어 나타났으며, 또한 여러 곳의 저비저항 이상대가 나타났는데 이는 점토로 충전된 공동으로 시추결과 확인되었다. 아울러 시추 결과와 전기비저항 탐사 결과는 매우 일치함을 알 수 있었다. 따라서 지반 침하를 평가하는 데 있어 전기비저항 탐사를 통한 지하영상화 작업이 매우 높은 분해능을 가짐을 알 수 있었으며 또한 지반 침하 지역을 조사하고 이를 평가함에 있어 $2{\sim}3$차원 전기비저항탐사가 매우 유용함을 확인할 수 있었다. 이러한 탐사 결과를 바탕으로 연구지역 주변의 재해 취약정도를 작성하였다.

• 한국의학물리학회지:의학물리
• /
• 제26권1호
• /
• pp.52-58
• /
• 2015

본 연구팀이 개발한 신개념 강내형 치과 진단 장치에서 촬영한 X선 치아영상으로부터 치아 우식증을 조기 단계에서 판별하고 치과의사의 정확한 진단을 돕기 위해서 병변진단 보조시스템인 치아 와동 자동 검출 프로그램을 개발하고자 하였다. 치아 와동 자동 검출 시스템을 구성하고 있는 기본 알고리즘은 치아 와동과 정상 치아를 구분 할 수 있는 영상분별 알고리즘과 치아 영상의 고유 특성 정보를 분석하고 이를 병변 검출에 적용할 수 있는 알고리즘으로 나눌 수가 있는데, 본 연구에서는 먼저, DRLSE 방법을 적용하여 병변과 정상치아 사이의 윤곽선 분할 성능을 테스트 하였다. 개발된 알고리즘의 와식 판별 성능을 테스트하기 위해서 다양한 형태의 와식을 포함하는 전치, 견치, 소구치 등의 7개의 치아팬텀을 제작하고 치아 와식 분별을 실시하였다. 총 14 개의 와식 중에 와식의 경계를 부분적으로 식별한 2개를 제외하고는 12개 와식의 경계를 정확하게 구별하여 개발된 자동 치아 병변 알고리즘의 가능성을 입증하였다. 그러나 실제 치아 와식의 형태는 개개인마다 다르고 복잡하기 때문에 무작위로 선택된 실제 치아에 적용하기 위해서는 보강된 알고리즘이 필요하다. 향후에는 치아에 대한 사전정보를 처리하고 적용하는 패턴 인식 혹은 기계학습 알고리즘을 추가하여 보다 효과적이고 정확한 병변 알고리즘으로 개선할 예정이다.

• Restorative Dentistry and Endodontics
• /
• 제18권2호
• /
• pp.357-367
• /
• 1993

The purpose of this study was to evaluate the fracture strength of class II restored premolars with amalgam, posterior composite, amalgam - Ketac silver, resin - Ketac silver restorations at marginal ridge. Fifty extacted maxillary and mandibular premolar teeth that were caries free, fracture free, and restoration free were selected and randomly divided into five groups : Group 1 : 10 intact teeth, Group 2 : 10 teeth with class II cavities and restored with, amalgam, Group 3: 10 teeth with class II cavities and restored with posterior resin, Group 4 : 10 teeth with class II cavities and restored with amalgam - ketac silver, Group 5 : 10 teeth with class II cavities and restored with resin - Ketac silver. All teeth were mounted in base of dental stone within metal rings of 2cm diameter, exposing only the crown portion. Class II mesio - occlusal or disto - occlusal cavities were prepared into specimens of Group 2 through 5 by using a No. 710 fissure bur. The occlusal portion was prepared to a faciolingual width of 1.5mm and a pulpal depth of 1.5mm. The proximal protion was prepared to a faciolingual width of 4mm, a occlusogingival height of 4mm, and a gingival floor of 1.5mm. The teeth in Group 2 and 3 were resotored with silver amalgam apd posterior resin respectively. In Group 4 and 5, proximal portions were first filled with Ketac silver 1.5mm gingivally and remaining cavities were restored with amalgam and posterior resin respectively. All specimens were stored in 100 % relative humidity at $37^{\circ}C$ for 48 hours before testing. All teeth were subjected to a compressive load in a Universal Instron Testing Machine at marginal ridges. The loads required to fracture the restorations were recorded in killograms and the data obtained were subjected to statisticall analysis. The results were all follows : 1. The fracture strength of Group 1 which were unprepared were $100{\pm}10.1\;kg$ and the higher values than Group 2, 3, 4, 5 which were prepared and resotred. 2. In restored groups, Group 2 had the higher fracture strength($81.8{\pm}12.4\;kg$) than other groups and Group 4 had the lowest fracture strength($66.8{\pm}9.2kg$). 3. There were significant differences between fracture strength of between Group 1 and Group 3, 4, 5(P<0.05), but not significant difference between fracture strength of Group 2, 3, 4, 5(P>0.05).

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.585.1-585
• /
• 2001

The use of flowable composite resins as liners in class II packable composite resins has been suggested by some manufacturers. However, the contributions of this technique are unproven. Objectives: The aim of this study was to compare the gingival microleakage in class II packable composite restorations with or without the use of flowable composite resins as liners.. Method: Slot cavities were prepared on both proximals of 80 extracted human molars and randomly assigned to 8 groups of 20 each.(중략)

• International Journal of Air-Conditioning and Refrigeration
• /
• 제6권
• /
• pp.158-167
• /
• 1998

Natural convection heat transfer in a rectangular enclosure is investigated numerically for low aspect ratio(height/width) cavities. Numerical results are obtained for aspect ratios between ${10}^{-2}$ and ${10}^0$, Rayleight numbers from ${10}^3$ to ${10}^7$ and Prandtl numbers from 10$^{-2}$ to 10$^3$. Results are compared with existing analytical and experimental results. A heat transfer correlation is developed to predict the mean Nusselt number as a function of the three governing dimensionless parameters: Rayleigh number, aspect ratio and Prandtl number.