• 한국공작기계학회논문집
• /
• 제16권3호
• /
• pp.133-140
• /
• 2007

A 2-D model of fluid flow, mass transport and electrochemistry is analysed to examine the effect of current density at the current collector depending on active layer thickness of catlyst in polymer elecrolyte fuel cells. The finite element method is used to solve the continuity, potential and Maxwell-Stefan equations in the flow channel and gas diffusion electrode regions. For the material behavior of electrode reactions in the active catalyst layers, the agglomerate model is implemented to solve the diffusion-reaction problem. The calculated model results are described and compared with the different thickness of active catalyst layers. The significance of the results is discussed in the viewpoint of the current collecting capabilities as well as mass transportation phenomena, which is inferred that the mass transport of reactants dictates the efficiency of the electrode in the present analysis.

• 마이크로전자및패키징학회지
• /
• 제11권1호
• /
• pp.59-64
• /
• 2004

고분자 전해질 연료전지의 성능은 촉매 지지 물질의 특성에 의존한다. 본 연구에서는 백금 촉매의 지지체로서 CNF(carbon nanofibre)와 CNT(carbon nanotube)를 사용하였다. CNF와 CNT는 기상화학증착법과 메카노케미컬 공정에 의해 처리된 촉매를 이용하여 합성되었다. 백금은 고분자 전해질 연료전지의 적용을 위하여 CNF와 CNT로 지지되었다. 그 결과, 65 nm의 직경을 가지는 twisted CNF로 준비된 MEA가 가장 우수한 I-V 특성을 나타내는 것이 확인되었다.

• 에너지공학
• /
• 제7권1호
• /
• pp.35-43
• /
• 1998

본 연구에서는 Pt/C와 Pt-Ru/C 촉매를 이용하여 직접메탄올 연료전지용 연료극 전극을 제조하고 전극 및 메탄올 산화 특성에 대하여 고찰하였다. 전극은 SEM, TEM 및 열중량 분석을 통하여 특성을 조사하였다. 메탄올의 산화 특성은 1M CH3OH+1M H2SO4 용액에서 정전위/정전류계를 이용하여 반전지 시험 및 순환 전압-전류법으로 조사하였다. 연구결과를 통하여 메탄올 산화전극은 촉매층 내에 PTFE가 20w% 포함되었을 경우가 백금촉매의 이용률이 높고 우수한 성능을 보여 주었다. Pt-Ru/C 이원촉매는 Pt/C 촉매에 비하여 메탄올 산화특성이 우수하고 성능이 우수한 촉매임을 알 수 있었다. Pt/Ru/C와 Pt/C 촉매를 이용하여 제조한 전극의 메탄올 산화반응에 대한 활성화 에너지는 11.60 kJ/mol과 26.85 kJ/mol이었다.

• 전기화학회지
• /
• 제11권1호
• /
• pp.16-21
• /
• 2008

직접메탄올 연료전지 (DMFC)의 핵심 구성 요소 중에서 하나는 고분자 전해질막과 촉매층 (연료극과 공기극)으로 구성된 전해질/전극 접합체 (MEA)이다. 그중에서 촉매층은 브러싱법, 전시법, 스프레이 코팅법, 스크린 프린팅법과 같은 다양한 방법을 사용하여 carbon paper나 carbon cloth등과 같은 전극 지지체 위에 코팅한다. 그러나 이러한 촉매 코팅방법들은 전극 지지체 위에 촉매를 균일한 두께로 코팅하기 어렵고, 촉매의 손실이 많으며, 또한 코팅 시간이 많이 필요하다는 단점들이 있다. 본 연구에서는 DMFC용 MEA의 전극층을 바코팅 방법 (bar-coating method)을 사용하여 한 번에 원하는 양의 촉매가 코팅되도록 제조하였다. 이렇게 제조한 전극 촉매층 표면과 단면의 형태를 SEM을 사용하여 관찰하였다. 제조한 MEA의 성능과 저항은 단위전지와 임피던스 분석기를 사용하여 측정하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.791-792
• /
• 2012

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.110-112
• /
• 2006

Membrane electrode assembly (MEA) for polymer electrolyte fuel cell (PEFC) are commonly prepared in the research laboratory by spraying, screen-printing and brushing catalyst slurry onto membrane or other support material like carbon paper or polyimide film in a batch style. These hand applications of the catalyst slurry are painstaking process with respect to precision of catalyst loading and reproducibility. It has been generally mentioned that the adoption of continuous process is very helpful to develop the reliable product. In the present work, we report the results of using continuous type coater with doctor-blade to coat catalyst slurry for preparing the MEA catalyst layers In a faster and highly reproducible fashion. We show that while expectedly faster than batch style, the machine coater requires the use of slurry of appropriate composition and a properly selected transfer decal material in order to achieve superior MEA plat lnw loading reproducibility. To make highly viscous catalyst slurry that is imperative for using coater, we use 40wt.% Nafion solution and minimize the content of organic solvent. And the choice of proper high surface area catalyst is important in the viewpoint of making well-dispersed slurry. After catalyst coating onto the support material, we transferred the catalyst layer to both sides of Nafion membrane by hot-pressing In this case, the degree of transfer was Influenced by hot-pressing condition including temperature, pressure, and time. To compare the transferring ability, we compared so many films and detaching papers. And among the support, polyethylene terephthalate(PET) film shows the prominent result.

• Journal of Ceramic Processing Research
• /
• 제18권11호
• /
• pp.810-814
• /
• 2017

Proton exchange membrane fuel cells (PEMFCs) are some of the most efficient electrochemical energy sources for transportation applications because of their clean, green, and high efficiency characteristics. The optimization of catalyst layer morphology is considered a feasible approach to achieve high performance of PEMFC membrane electrode assembly (MEA). In this work, we studied the effect of the solvent on the catalyst layer of PEMFC MEAs fabricated using the electrostatic spray deposition method. The catalyst ink comprised of Pt/C, a Nafion ionomer, and a solvent. Two types of solvent were used: isopropyl alcohol (IPA) and dimethylformamide (DMF). Compared with the catalyst layer prepared using IPA-based ink, the catalyst layer prepared with DMF-based ink had a dense structure because the DMF dispersed the Pt/C-Nafion agglomerates smaller and more homogeneously. The size distribution of the agglomerates in catalyst ink was confirmed through Dynamic Light Scattering (DLS) and the microstructure of the catalyst layer was compared using field emission scanning electron microscopy (FE-SEM). In addition, the electrochemical investigation was performed to evaluate the solvent effect on the fuel cell performance. The catalyst layer prepared with DMF-based ink significantly enhanced the cell performance (1.2 A cm-2 at 0.5 V) compared with that fabricated using IPA-based ink (0.5 A cm-2 at 0.5 V) due to the better dispersion and uniform agglomeration on the catalyst layer.

• 전기화학회지
• /
• 제16권1호
• /
• pp.30-38
• /
• 2013

In this study, a catalyst slurry was prepared with a Pt/C catalyst, Nafion ionomer solution as a binder, an ionic liquid (IL) (1-butyl-3-methylimidazolium tetrafluoroborate), deionized water and ethanol as a solvent for the application to polymer electrolyte fuel cells (PEFCs) at high-temperatures. The effect of the IL in the electrode of each design was investigated by performing a cyclic voltammetry (CV) measurement. Electrodes with different IL distributions inside and on the surface of the catalyst electrode were examined. During the CV test, the electrochemical surface area (ESA) obtained for the Pt/C electrode without ILs gradually decreased owing to three mechanisms: Pt dissolution/redeposition, carbon corrosion, and place exchange. As the IL content increased in the electrode, an ESA decrement was observed because ILs leaked from the Nafion polymer in the electrode. In addition, the CVs under conditions simulating leakage of ILs from the electrode and electrolyte were evaluated. When the ILs leaked from the electrode, minor significant changes in the CV were observed. On the other hand, when the leakage of ILs originated from the electrolyte, the CVs showed different features. It was also observed that the ESA decreased significantly. Thus, leakage of ILs from the polymer electrolyte caused a performance loss for the PEFCs by reducing the ESA. As a result, greater entrapment stability of ILs in the polymer matrix is needed to improve electrode performance.

• Macromolecular Research
• /
• 제10권4호
• /
• pp.181-186
• /
• 2002

The displacement of carbon black to polypyrrole as a catalyst supporter in the fuel electrode of a direct methanol fuel cell was investigated. Polypyrrole was obtained as a black powder by the chemical polymerization of pyrrole with three different oxidants. The synthesized polypyrroles were pasted on carbon paper and transformed to the fuel electrodes with electrochemically deposited platinum. The prepared fuel electrode was assembled and mounted in a unit cell using a membrane and cathodic electrode film. In comparison with the carbon black fuel electrode, the performance of the unit cell was analyzed in relation to the state of the catalyst, the type of oxidant, and the morphology of the polypyrrole powder.

• Korean Chemical Engineering Research
• /
• 제52권6호
• /
• pp.695-700
• /
• 2014

고분자전해질 연료전지로 물을 전기분해하여 수소와 산소를 발생시킬 수 있다. 그러나 1.7V 이상의 높은 전압에서 수전해 반응이 일어나므로 전극과 고분자 전해질 막의 열화가 빠르게 진행된다. 수전해 과정에서 anode의 열화를 방지하기 위해 촉매로 지지체 없는 $IrO_2$를 보통 사용하는데 본 연구에서는 고분자전해질 연료전지용 Pt/C 촉매를 수전해 반응에 그대로 사용했을 때 전극과 막의 열화 현상을 분석하였다. 1.8~2.0 V 전압 범위에서 수전해 반응 후 고분자 전해질 연료전지 구동 조건에서 I-V, CV, 임피던스, LSV를 측정했다. 수전해 전압이 높을수록 전극과 막의 열화 속도가 증가하였다. 2.0 V에서 1분 동안 수전해 반응했을 때 수소 수율은 88%였고, 전극과 고분자 막이 열화되어 0.6 V에서 성능이 49% 감소하였다.