• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.883-889
• /
• 2009

The importance of cost estimate in early stage such has been increasing due to market change and severe competition in construction industry. Because the adjustable budget is only 20% after design stage, most of the crucial decisions to influence cost is made in the early stage. However, in the early stage, the project scope is not defined completely so that estimator has inaccurate information to make critical decision. Therefore, this research suggests the cost estimate method using case-based reasoning. Case-based reasoning is appropriate for the early cost estimating, as it has the strength of rapidity and convenience in cost estimation. This research analyzes 84 actual data of public apartment on the scale of 11~15 stories. In order to extract the most similar case, at the first step this research identifies influence factors and calculates attribute similarity. In case-based reasoning, the most challenging task is determining attribute weight. At the third step, this research calculates case similarity which is aggregated attribute similarity multipled by attribute weight. Finally, extracts the most similar case which has the highest score of case similarity.

• Spatial Information Research
• /
• v.9 no.2
• /
• pp.171-184
• /
• 2001

The nature of ill-defined planning problems makes expert systems difficult to acquire and represent knowledge for decision making in urban planning processes. In order to resolve these problems, a case-based reasoning method was applied to develop a spatial analysis system for urban planning. A case study was conducted in a residential land use planning process. The result of the study revealed the effectiveness of reasoning by the spatial analysis system and the possibility of its future application. More accumulation of information on other successful cases should be sought to yield better results

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.9 s.186
• /
• pp.119-126
• /
• 2006

This paper addresses the methodology development far the automated machining setup planning system using case-based reasoning(CBR). The case-based reasoning is used to develop a setup planning system. which consists of part input and representation module, case retrieval module, and case adaptation module. We present new approaches in the part input and representation module and the case retrieval module focusing on the similarity index determination. An illustrative example is included to demonstrate the proposed method.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.1
• /
• pp.103-110
• /
• 1998

In case of traditional Rule-Based Reasoning(RBR) and Case-Based Reasoning(CBR), although knowledge is reasoned either by one of them or by the integration of RBR and CBR, there is a problem that much time should be consumed by numerous rules and cases. In order to improve this time-consuming problem, in this paper, a new type of reasoning technique, which is a kind of integration of reduced RB and CB, is to be introduced. Such a new type of reasoning uses Rough Set, by which we can represent multi-meaning and/or random knowledge easily. In Rough Set, solution is to be obtained by its own complementary rules, using the process of RB and CB into equivalence class by the classification and approximation of Rough Set. and then using reduced RB and CB through the integrated reasoning.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.46
• /
• pp.181-196
• /
• 1998

The aim of this research is the development of a CAPP system which can use the old experience of process planning to generate a process plan for a new part and learn from its own experience using the concept of stratified case-based reasoning(CBR). A process plan is determined through the hierarchical process planning procedure that is based on the hierarchical feature structure of a part. Each part and case have their own multiple abstractions that are determined by the feature structure of the part. Retrieving the case in stratified case-based process planning is accomplished by retrieving the abstraction that is most similar to the input part abstraction in each abstraction level of the case-base. A new process plan is made by the adaptation that translates the old case's process plan into the process plan of a new part. Operations, machines and tools, setups and operation sequence in each setup are determined in the adaptation of abstraction using some algorithms and the reasoning based on knowledge-base. By saving a new part and its process plan as a case, the system can use this new case in the future to generate a process plan of a similar part. That is, the system can learn its own experience of process planning. A new case is stored by adding the new abstractions that are required to save as the new abstraction to the existing abstractions in the case-base.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.382.1-382
• /
• 2002

This paper presents a new approach integrated Case-Based Reasoning with Self- Organization Map(SOM) in diagnosis systems. The causes of faults are obtained by case-base trained from SOM. When the vibration problem of rotating machinery occurs, this provides an exact diagnosis method that shows the fault cause of vibration problem. In order to verify the performance of algorithm, we applied it to diagnose the fault cause of the electric motor.

• Computers and Concrete
• /
• v.20 no.6
• /
• pp.645-654
• /
• 2017

Continuing from previous studies of sustainable concrete containing environmentally friendly materials and existing modeling approach to predicting concrete properties, this study developed an estimation methodology to predicting the strength of sustainable concrete using an advanced case-based reasoning approach. It was conducted in two steps: (i) establishment of a case database and (ii) development of an advanced case-based reasoning model. Through the experimental studies, a total of 144 observations for concrete compressive strength and tensile strength were established to develop the estimation model. As a result, the prediction accuracy of the A-CBR model (i.e., 95.214% for compressive strength and 92.448% for tensile strength) performed superior to other conventional methodologies (e.g., basic case-based reasoning and artificial neural network models). The developed methodology provides an alternative approach in predicting concrete properties and could be further extended to the future research area in durability of sustainable concrete.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.119-124
• /
• 2005

It is necessary for prediction of recycled aggregate concrete(RAC) strength at the early stage that facilitate concrete form removal and scheduling for construction. However, to predict RAC strength is difficult because of being influenced by complicated many factors. Therefore, this research suggest optimized estimation method that can reflect many factors. One way is Case-Based Reasoning(CBR) that solved new problems by adapting solutions to similar problems solved in the past, which are solved in the case library. Other way is Artificial Neural Networks(ANN) that solved new problems by training using a set of data, which is representative of problem domain. This study is to propose comparing accuracy of the estimating the compressive strength of recycled aggregate concrete using Case-Based Reasoning(CBR) and Artificial Neural Networks(ANN).

• The KIPS Transactions:PartB
• /
• v.17B no.2
• /
• pp.163-168
• /
• 2010

A linguistic case-based fuzzy reasoning (LCBFR) based on standardized parametric membership functions (SPMF) is proposed. It provides an efficient mechanism for a fuzzy reasoning within linear time complexity. Thus, it can be used to improve the speed of fuzzy reasoning. In the process of LCBFR, linguistic case indexing and retrieval based on SPMF is suggested. It can be processed relatively fast compared to the previous linguistic approximation methods. From the engineering viewpoint, it may be a valuable advantage.

• Journal of information and communication convergence engineering
• /
• v.3 no.4
• /
• pp.209-212
• /
• 2005

This study proposes hybrid case-based reasoning and genetic algorithms model for customer classification. In this study, vertical and horizontal dimensions of the research data are reduced through integrated feature and instance selection process using genetic algorithms. We applied the proposed model to customer classification model which utilizes customers' demographic characteristics as inputs to predict their buying behavior for the specific product. Experimental results show that the proposed model may improve the classification accuracy and outperform various optimization models of typical CBR system.