• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.37-40
• /
• 2007

This study investigates the effect of the pre-mix cement to the physical properties of the concrete according to the various combinations of the binders and the silica fume types. The results are summarized as following. For the properties of the fresh, the fluidity in the case that OPC+cilica fume-blast-furnace slag is appropriate compared to OPC+cilica fume+fly ash. Expecially, it is favorable when pre-mix is used. The fluidity time of the A, B depending on silica fume types is favorable, but it is decreased on C. The air content depending on silica fume types is low when the fly ash is used. Specially, the air content in the case that pre-mix is used is low caused by the dispersion of the silica fume. For the properties of the hardened concrete, the compressive and flexible strength when the blast-furnace slag is pre-mixed are high, and they exceed OPC. The strength depending on the silica fume types is high on B, and the strength of the others is similar.

• 한국도로학회논문집
• /
• 제16권4호
• /
• pp.21-33
• /
• 2014

PURPOSES: The purpose of this study was to break away from the workforce method using cold-mix asphalt mixtures and has a constant quality and has develop repair materials of pre-production asphalt-precast types. METHODS: The selection of the repair material was determined as the results obtained through physical properties of materials and the field applicability. In case of repair materials, values obtained through Marshall stability test & the dynamic stability test & retained stability test as well as the site conditions was considered. In case of adhesive, test results were obtained through examination of the bond strength(tensile, shear) and the field applicability of the adhesive was examined through combined specimens to simulate field applications. RESULTS : According to the results of laboratory tests, in the case of repair materials, Marshall stability and dynamic stability, retained stability of cold-mix reaction type asphalt mixture is the highest. In the case of adhesive, two-component epoxy-urea has a very high bonding strength(tensile, shear) was most excellent. According to the results of field tests, when epoxy-urea was excellent workability. Also, the repair body through actual mock-up test did not occur large deformation and fracture after 12 months. CONCLUSIONS : A suitable repair material is cold-mix reaction type mixture of asphalt-precast, a suitable adhesive is a two-component epoxy-urea.

• 대한한의진단학회지
• /
• 제17권3호
• /
• pp.287-295
• /
• 2013

Objectives This study is report the effect of Asian Medical treatments for acne. Methods 25 years old mixed Hispanic female in California resident patient who was suffering from acne was treated with the Chung-We mix Extract powder, Houttuyniae Herba Extract and comedone extractor. She was taken a picture to compare with before and after treatments. Results Her acne was decreased and global acne grading system by 35 points to 7point improvement on the after treatments. Conclusion This case has the effectiveness with Herbs. According to Asian medicine, the caused of acne is internal problems and the acne is diagnosed as several kind of heats in the internal organ. Further clinical case of acne is needed for better results and to develop the ways of accurate diagnosis.

• 한국농공학회지
• /
• 제17권2호
• /
• pp.3749-3757
• /
• 1975

This study was conducted to investigate some effects of Cemesol on acidresistance and compressive strength of concrete. In mix design of concrete, the cemesol was used as an admixture of cement, and it was added to the mix in an amount equal to 0.1%, 0.2%, 0.3%, and 0.4% by weight of cement of the mix. Concrete specimens were made in accordance with the. Korean Standard Specification for concrete and they were tested for acid-resistance and compressive strength at 2 weeks intervals through 8 weeks. The tests were performed in two cases non-curing and curing for 28 days. The results obtained from the tests are summarized as follows. 1. Refering to acid-resistance test, the cemesol was comparatively effective at every cemesol content except 0.3% in case of non-curing and it was found that cemesol content of 0.4% was the optimum. On the other hand, the cemesol was ineffective in case of curing, but it was seen that cemesol content of 0.1% had some effect at 6 to 8 weeks curing only. 2. Refering to compressive strength test, the cemesol was remarkably effective at a content of 0.1% but it was also shown most inefiective at content of 0.3% in case of non-curing. On the other hand the cemesol was comparatively effective at every content of cemesol except a content of 0.2% in case of curing and it was determined that the cemesol content of 0.3% may be an optimum content. 3. Since optimum cemesol content varied according to acid-resistance, compressive strength and cases such as non-curing and curing, as indicated above may be desirable to choose an optimum cemesol content suitable for purposes and ciroumstances of construction works or conditions of location. 4. The corrosive rate was proportional to compressive strength in case of non-curing, but the relation was reversed in case of curing. It was found that corrosive rate for 8 weeks did not influence compressive strength in case of non-curing but compressive strength in case of curing begins to vary under the influence of corrosion. Thus, corrosion may be more serious to compressive strength in case of curing than that in case of non-curing.

• 한국산학기술학회논문지
• /
• 제13권10호
• /
• pp.4832-4836
• /
• 2012

일반적으로 아스팔트 혼합물 배합설계는 많은 시간과 실험이 필요하다. 또한, 정밀한 배합설계 결과는 실험하는 사람의 숙련도와 밀접한 상관관계가 있다. 이러한 문제점을 해결하기 위하여 Bailey는 아스팔트 혼합물용 골재입도에 대한 연구를 통해 골재입도곡선에서 특정한 크기의 골재의 입도 및 통과중량비가 중요함을 제시하였다. 본 연구에서는 Bailey가 제안한 방법을 이용하여 19mm 밀입도 아스팔트 혼합물 및 미연방도로국의 배수성포장(PA 20mm) 혼합물에 대한 배합설계를 시행하였다. Bailey 방법을 이용한 아스팔트 혼합물용 골재입도 결정방법은 기존에 시행착오를 통합 배합설계방법에 비해 좀더 짧은 시간에 최적배합설계를 수행할 수 있음을 확인하였다. 19mm 밀입도 아스팔트 혼합물의 CA, $FA_c$, $FA_f$는 0.724, 0.440 및 0.455로 기준값을 만족하였다. PA 20mm 아스팔트 혼합물의 계산된 CA, $FA_c$, $FA_f$는 0.646, 0.476 및 0.450으로 기준값을 만족하였다.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권4호
• /
• pp.517-527
• /
• 2021

While the two principles of lean manufacturing and time-driven activity-based costing (TDABC) have been established out of multiple incentives and do not follow the same particular targets, there is substantial commonality between them. In these conditions, the supply management of a multi-product system needs a rigorous production model to minimize costs. In this sense, this paper proposes an interactive model with the consideration of optimizing product-mix decisions using both lean development tools and TDABC. This paper proposes a qualitative approach using the case study of the Iraqi state company for battery production. The suggested model decreased manufacturing time and costs, along with some substantial reduction in idle production capacity by 26 percent in 2019, based on the findings of the case study. On the other hand, the proposed model gives two side advantages: an efficient division of costs on goods due to the use of time spent as a cost factor for products and cost savings due to the introduction of the lean manufacturing approach that reduces all additional costs and increases product-mix decisions. Furthermore, the analytical data gathered here suggests that the incorporation of lean management concepts and TDABC has a strong and important influence on product-mix decisions.

• 대한간호학회지
• /
• 제35권5호
• /
• pp.774-786
• /
• 2005

Purpose: The purpose of this study was to measure home health resource utilization using a Case-Mix Adjustor Model developed in the U.S. Method: The subjects of this study were 484 patients who had received home health care more than 4 visits during a 60-day episode at 31 home health care institutions. Data on the 484 patients had to be merged onto a. 60-day payment segment. Based on the results, the researcher classified home health resource groups (HHRG). Result: The subjects were classified into 34 HHRGs in Korea. Home health resource utilization according to clinical severity was in order of Minimum (C0) < 'Low (Cl) < 'Moderate (C2) < 'High (C3), according to dependency in daily activities was in order of Minimum (F0) < 'High (F3) < 'Medium (F2) < 'Low (Fl) < 'Maximum (F4). Resource utilization by HHRGs was the highest 564,735 won in group C0F0S2 (clinical severity minimum, dependency in daily activity minimum, service utilization moderate), and the lowest 97,000 won in group C2F3S1, so the former was 5.82 times higher than the latter. Conclusion: Resource utilization in home health care has become an issue of concern due to rising costs for home health care. The results suggest the need for more analytical attention on the utilization and expenditures for home care using a Case-Mix Adjustor Model.

• 대한간호학회지
• /
• 제33권2호
• /
• pp.275-283
• /
• 2003

Purpose: This study was to classify elderly in long-term care hospitals for using Resource Utilization Group(RUG-III) and to consider feasibility of payment method based on RUG-III classification system in Korea. Method: This study designed by measuring resident characteristics using the Resident Assessment Instrument-Minimum Data Set(RAI-MDS) and staff time. The data were collected from 382 elderly over sixty-year old, inpatient in the five long-term care hospitals. Staff time was converted into standard time based on the average wage of nurse and aids. Result: The subjects were classified into 4 groups. The group of Clinically Complex was the largest(46.3%), Reduced Physical Function(27.2%), Behavior Problem(17.0%), and Impaired Cognition(9.4%). The average resource use for one resident in terms of care time(nurses, aids) was 183.7 minutes a day. Relative resource use was expressed as a case mix index(CMI) calculated as a proportion of mean resource use. The CMI of Clinically Complex group was the largest(1.10), and then Reduced Physical Function(0.93), Behavior Problem(0.93), and Impaired Cognition(0.83) followed. The difference of the resource use showed statistical significance between major groups(p<0.0001). Conclusion: The results of this study showed that the RUG-III classification system differentiates resources provided to elderly in long-term care hospitals in Korea.

• 한국해양공학회지
• /
• 제17권4호
• /
• pp.16-22
• /
• 2003

The mechanical characteristics of newly recycled aggregate concrete on the basis of the proposed mix design model have been studied to develop the precast artificial fishing reefs. In the first task, the experimental test for the recycled aggregates taken from Jeju Island has been carried out to verify the material properties in terms of specific gravity, percentage of solids, absorption and abrasion of coarse aggregates. In the second task, the experimental parameters of newly recycled aggregate concrete are investigated to meet with the requirements of guidelines with respect to slump, unit weight, pH, ultrasonic velocity, void ratio, and compressive strength which are made of sea-shore sand ad slag cement. The natural aggregate and polypropylene fiber are added to newly recycled aggregate concrete to improve the compressive strength and quality. The optimal mix proportions for compressive strength are W/C=30％, S/a=15％, NA/G=50％ in porous concrete case, W/C=40％, S/a=45％ in plain concrete case, and W/C=40％, S/a-45％, PF=1.0kg/㎥ in fiber reinforced concrete case.

• 한국BIM학회 논문집
• /
• 제3권1호
• /
• pp.11-20
• /
• 2013

Mix-used development in urban renewal project is done to effectively utilize the limited downtown. Generally unlike a single project, It features placing a large number of different facilities(residential, commercial, business, cultural, etc.) which is each other organically linked. The purpose of this study is to suggest the method of modeling guide for 3D preliminary cost estimation considering visual and intuitive judgement of space in mix-used development Urban Renewal project. In this research, introducing SME(Standard Module and Element) breakdown structure, FID(Finish Identity) for estimating building space unit-based quantity take off was implemented. It could narrow the discrepancy of opinion between the stakeholders with more accurate cost-estimates, comparing to the traditional methods.