• 한국태양에너지학회 논문집
• /
• 제31권4호
• /
• pp.136-141
• /
• 2011

The lightshelf system reduces intense illumination levels of indoor from direct sun light and reflect to lead diffused light into indoor deeply. This study aims to design acurved-lightshelf by a ray tracing method and evaluate the daylighting performance of window integrated with the curved-lightshelf by computer simulations. For this purpose, evaluation test model was designed for the experiments to validate the simulation model, and the curved-lightshelf was designed by the ray tracing method using Ecotect. After the office model was designed using 3D simulation, the average indoor illuminance, luminance and distribution of illuminance were evaluated by simulation which has a algorithm of Radiosity and Ray-Tracing method under four different cases(case1;no lightshelf, case2; Flat board, case3; tilted at $30^{\circ}$ angle, case4; the curved-lightshelf). As results, it turns out that case1 showed higher average illuminance and case4 was more uniformly distributed than case2 and case3, In addition average luminance of case1 was also lower. indicating that the curved-lightshelf would reduce the possibility of the glare, while maintaining the sufficient daylight level.

• 사상체질의학회지
• /
• 제34권1호
• /
• pp.13-27
• /
• 2022

Objectives The purpose of this study is to reevaluate the quality of reporting on case reports published in Journal of Sasang Constitutional Medicine (SCM) from June 2018 to December 2021, compared with January 2015 to May 2018. Methods Case reports were identified by searching from archive on the website of society of Journal of SCM. We assessed the quality of reporting on them based on CAse REport (CARE) guideline. Results A total of 32 case reports was finally included for the assessment. Overall quality of reporting was improved compared to one of previous study. The median reported rate of 'sufficiently' reporting increased by 7.8% from 66.7% to 74.5%, while the one as evaluated 'not sufficiently' and 'not reported' decreased by 4.1% from 14.8% to 10.7%, and 3.5% from 21.4% to 17.9%, respectively. However, more than 50% of 32 case reports did not still report 5 items about intervention adherence and tolerability(96.9%), diagnostic challenges(93.8%), adverse events(87.5%), timeline(68.8%), and patient's perspective on interventions(65.6%). Compared to the results of previous study, continuous attention is required for adverse events and changes in intervention in which the unreported rate increased by 18.3% and 6.3%, respectively. In addition, prognostic characteristics, patient's informed consent, patient's occupation, and keyword of 'Case report' and 'Sasang (Constitutional) medicine' should be sufficiently reported in the future. Conclusions Despite the overall improvement in the quality of reporting, efforts to improve the quality of reporting should be continued by referring to well-reported cases reports previously published in Journal of SCM.

• Food Science and Biotechnology
• /
• 제15권5호
• /
• pp.698-703
• /
• 2006

We investigated how the addition of polypeptides to instant fried noodle dough affects the dough properties, starch gelatinization, and textural properties of cup-type instant fried noodles. After comparing farinograph results of 100% wheat flour with 1% wheat flour substituted with gluten, there was a small difference in the mechanical dough properties. However, in the case of 1% wheat flour substituted with gluten peptides, the dough development time increased, dough stability decreased, and weakness increased. On the other hand, when gluten or gluten peptides were added, starch gelatinization did not change significantly. At the steaming stage, substitution with gluten peptides or soybean peptides markedly changed the molecular weight distributions of extractable polypeptides. Especially in the case of wheat flour substituted with 1% gluten peptides, the relative portion of low Mw extractable polypeptides (2.5-50 kDa) decreased more compared to a control. Also, the hardness and chewiness decreased in cooked cup-type instant fried noodles containing gluten peptides. This suggests that the addition of gluten peptides can reduce the rehydration time of cup-type instant fried noodles.

• 환경위생공학
• /
• 제8권1호
• /
• pp.81-91
• /
• 1993

This paper was carried out to isolate and identify Aeromonas caviae which can degrade Sodium Dodecyl Benzene Sulfonate(SDBS) effectively. And the affecting factors for the ability of bacterial degradation were also studied. Frm October 1991 to February 1992, two hundred samples from sweage in Taegu area and Nakdong river waters in Talsung Gun area were tested. Minimal salt medium which contain SDBS only as a carbon source was used as a culture medium. The isolated new strain was identified as Aeromonas caviae Kim & Kweon. The optimal pH for SDBS degradation were 7.0 and temperature, $32^{\circ}C.$ It was taken 24 hours to degrade SDBS of 20mg/l completely under the optimal pH and temperature. And in the case of 30 mg/l of SDBS, it was taken 36 hours. The nitrogen sources were added to the minimal salt media containing 20mg/l of SDBS, and they were incubated at $32^{\circ}C$ for 14 hours. 86.9% SDBS were degraded after addition of 0.03% peptone as a organic nitrogen source. And 70.5% SDBS after addition of 0.05% ammonium sulfate as a inorganic nitrogen source. In the case of metal compounds(0.015%), the degradation rate for SDBS were 3.5 fold increased in the media containing magnesium chloride and calcium chloride than in the media that were not containing these metal compounds. And where the media containing magnesium chloride was 0.05%, the degradation rate was 65.8%. And above 0.3% NaCI, the degradation rate was decreased slowly.

• 한국세라믹학회지
• /
• 제19권4호
• /
• pp.287-292
• /
• 1982

Nonohmic properties of ZnO ceramics with various small amounts of additives were studied in relation to experimental methods, additive contant and sintaring temperature. The kinds of additives used to following chemicals were basic additives ($0.5Bi_2O_3$, $0.3BaCO_3$, $0.5MnCO_3$, $0.5Cr_2O_3$, $0.1KNO_3$), $TiO_2$ and $Al(OH)_3$. Expecially, this study has focused on the effectsof $TiO_2$ and $Al(OH)_3$ in ZnO ceramics with the basic additives. SEM studies indicated that the addition of TiO2 promoted grain growth but retarded grain growth with the addition of $Al(OH)_3$. Also, in the case of calcination of ZnO with $TiO_2$ and ZnO with $Al(OH)_3$ previously, grain size of ZnO with $TiO_2$ was larger and that of ZnO with Al(OH)3 was smaller in comparison to the case with out calcination. From the viewpoint of nonohmic exponent and nonohimic resistance, electrical characteristics of ZnO, $TiO_2$ and the basic additives was more effective than that of ZnO, $Al(OH)_3$ and the basic additives. Nonohmic exponent and nonohmic resistance of ZnO, $TiO_2$ and the basic additives was 11-13 and 40-65 respectively.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.194-198
• /
• 2005

Although the rainstorm causes local damage on large scale, it is difficult to predict the movement of the rainstorm exactly. In order to reduce the rainstorm damage of the rainstorm, it is necessary to analyze the path of the rainstorm using various statistical methods. In addition, efficient time interval of rainfall observation for the analysis of the rainstorm movement can be derived by applying various statistical methods to rainfall data. In this study, the rainstorm tracking using statistical method is performed for various types of rainfall data. For the tracking of the rainstorm, the methods of temporal distribution, inclined Plane equations, and cross correlation were applied for various types of data including electromagnetic rainfall gauge data and AWS data. The speed and direction of each method were compared with those of real rainfall movement. In addition, the effective time interval of rainfall observation for the analysis of the rainstorm movement was also investigated for the selected time intervals 10, 20, 30, 40, 50, and 60 minutes. As a result, the absolute relative errors of the method of inclined plane equations are smaller than those of other methods in case of electromagnetic rainfall gauges data. The absolute relative errors of the method of cross correlation are smaller than those of other methods in case of AWS data. The absolute relative errors of 30 minutes or less than 30 minutes are smaller than those of other time intervals.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 창립총회 및 춘계학술발표회
• /
• pp.101-107
• /
• 2000

Column tests using KCl and Benzene as tracers were conducted for four different cases: 1) no hydrogen peroxide and no microorganism; 2) hydrogen peroxide only; 3) microorganism only; 4) hydrogen and microorganism to investigate the sorption and degradation characteristics of Benzene. The observed BTCs of KCl and Benzene in all cases showed that the arrival times of the peaks of both tracers coincided well but the peak concentration of Benzene was much lower than that of KCl. This result reveals that a predominant process affecting the transport of Benzene in a sandy soil is an irreversible sorption and/or degradation rather than retardation. Decay of Benzene through sorption and degradation increased with the addition of hydrogen peroxide and/or microorganism. Dissolved oxygen decreased with the increase of Benzene in all cases indicating that Benzene was degraded by dissolved oxygen. For BTCs with the addition of microorganisms (case 3 and case 4), microorganism showed much lower concentrations compared to the initial levels and an increasing tendency with time although concentrations of Benzene returned to zero, indicating a possible retardation of microorganism due to reversible and irreversible sorption to the particle surfaces.

• 한국분말재료학회지
• /
• 제10권1호
• /
• pp.6-14
• /
• 2003

The purpose of the present study is to investigate the method decreasing debinding time as well as lowering operation condition than pure supercritical $CO_2$ debinding by using cosolvent or binary mixture of propane + $CO_2$. First method is to add cosolvent, such as n-hexane, DCM, methanol, 1-butanol, in supercritical $CO_2$. In case of adding cosolvent, we were found the addition of non-polar cosolvent (n-hexane) improves dramatically the binder removal rate (more than 2 times) compared with pure supercritical $CO_2$ debinding, second method is to use mixture of supercritical propane + $CO_2$, as solvent. In case of using mixture of supercritical propane + $CO_2$, the rate of debinding speeded up with increasing of pressure and concentration of propane at 348.15 K. It was found that addition of cosolvent (e.g., n-hexane, DCM) and binary mixture propane + $CO_2$ for supercritical solvent remarkably improved binder removal rate for the paraffin wax-based binder system, in comparison with using pure supercritical $CO_2$.

• 통합자연과학논문집
• /
• 제12권4호
• /
• pp.116-121
• /
• 2019

This experiment is to evaluate the physical properties of the hydrogel lens with the addition of carbon-based nanomaterials, Graphene oxide and Carbon nanotube, and to confirm the improvement of strength. Hyaluronic acid, a hydrophilic substance, was used as an additive by using HEMA (2-hydroxyethyl methacrylate) and ethylene glycol dimethacrylate (EGDMA) as a base monomers. Graphene oxide and two types of Carbon nanotubes(Amide functionalized and Carboxilic acid functionalized) were added 0.1%, 0.3%, 0.5%, respectively, and the physical properties were analyzed by measuring water content, refractive index, breaking strength and SEM image. In the case of the sample added with each carbon nano material, the water content tended to increase for all three materials. The breaking strength tended to increase in Graphene oxide and Carbon nanotube; Carboxilic acid functionalized, but in the case of Carbon nanotube; amide fuctionalized, the breaking strength tended to decrease. However, Carbon nanotube; amide fuctionalized had the highest breaking strength among the three nano materials. Thus, the addition of certain carbon nanomaterials seems to be appropriate for improving the strength of hydrogel lenses.

• 한국정보시스템학회지:정보시스템연구
• /
• 제18권1호
• /
• pp.97-115
• /
• 2009

This study proposes a framework for an evaluation and selection of a venture firm with promising new technology in optical electronics industry to nurture that firm. The framework is intended to help practitioners to evaluate accurately and objectively new technologies. In addition, this study tests the usability and effectiveness of this framework with an actual certain case. More specifically, this study, first proposes that the framework for new technology evaluation is composed of financial perspective, market perspective, internal business perspective, and R&D and growing perspective. They are on the four perspectives of BSC(Balanced Score Card). Each perspective contains specific items. In addition, this study uses AHP(Analytic Hierarchy Process) to assess the comparative importance among the four perspectives and their specific items. Secondly, based on the results of AHP, the usability and effectiveness of the framework suggested in this study have been tested with a real case evaluating and selecting a promising venture firm. The results of the study have the following implications: this study has developed the framework for new technology evaluation which assists practitioners. Our framework offers the four perspectives and their specific items with their respective comparative importance. Furthermore, this study has verified that the proposed framework can be applicable in real situation with more accurate results.