• Journal of the Korean Geosynthetics Society
• /
• v.23 no.1
• /
• pp.49-60
• /
• 2024

Recently, the frequency and intensity of typhoon-induced wave loading are increasing due to changed marine environments such as climate change. In addition, frequent earthquakes are causing a lot of damage around the world, including in Japan, Chile, Haiti, China, and Indonesia. In Korea, damage from typhoons has also been increasing since the 2000s, and the frequency and intensity of earthquakes are also increasing. Korea is surrounded by sea on three sides, so typhoons can cause a lot of damage to coastal structures, and earthquakes also cause a lot of damage to coastal structures. As such, the frequency and intensity of typhoon-induced wave loading and earthquakes are increasing both domestically and internationally, but there is no research linking typhoons and earthquakes. Therefore, in this study, numerical analysis was performed for a total of four cases by linking typhoon waves and earthquakes to the caisson breakwater. Numerical analysis was performed by applying wave loads in Case 1 and seismic wave in Case 2, seismic wave after wave loads in Case 3, and wave loads after seismic wave in Case 4. As a result of the numerical analysis, it was confirmed that in Case 3 and Case 4, which linked a typhoon and earthquakes, the damage caused by each load increased compared to Case 1 and Case 2 because the load was applied while the existing ground strength was reduced. In addition, it was confirmed that the greatest damage occurred in Case 3, in which seismic wave were applied after the wave loads.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.228-234
• /
• 2021

Real estate market participants need to have a sense of predicting real estate prices in decision-making. Commonly used methodologies, such as regression analysis, ARIMA, and VAR, have limitations in predicting the value of an asset, which fluctuates due to unknown variables. Therefore, to mitigate the limitations, an artificial neural was is used to predict the price trend of apartments in Seoul, the hottest real estate market in South Korea. For artificial neural network learning, the learning model is designed with 12 variables, which are divided into macro and micro factors. The study was conducted in three ways: (Ed note: What is the difference between case 1 and 2? Is case 1 micro factors?)CASE1 with macro factors, CASE2 with macro factors, and CASE3 with the combination of both factors. As a result, CASE1 and CASE2 show 87.5% predictive accuracy during the two-year experiment, and CASE3 shows 95.8%. This study defines various factors affecting apartment prices in macro and microscopic terms. The study also proposes an artificial network technique in predicting the price trend of apartments and analyzes its effectiveness. Therefore, it is expected that the recently developed learning technique can be applied to the real estate industry, enabling more efficient decision-making by market participants.

• Journal of Environmental Science International
• /
• v.21 no.1
• /
• pp.69-81
• /
• 2012

This study forecasts changes in thermal environment and microclimate change per new building construction and assignment of green space in urban area using Computational Fluid Dynamics(CFD) simulation. The analysis studies temperature, humidity and wind speed changes in 4 different given conditions that each reflects; 1) new building construction; 2) no new building construction; 3) green spaces; and 4) no green spaces. Daily average wind speed change is studied to be; Case 2(2.3 m/s) > Case 3. The result of daily average temperate change are; Case 3($26.5^{\circ}C$) > Case 4($24.6^{\circ}C$) > Case 2($23.9^{\circ}C$). This result depicts average of $2.5^{\circ}C$ temperature rise post new building construction, and decrease of approximately $1.8^{\circ}C$ when green space is provided. Daily average absolute humidity change is analysed to be; Case 3(15.8 g/kg') > Case 4(14.1 g/kg') > Case 2(13.5 g/kg'). This also reveals that when no green spaces is provided, 2.3 g/kg' of humidity change occurs, and when green space is provided, 0.6 g/kg change occurnd 4(1.8 m/s), which leads to a conclusion that daily average wind velocity is reduced by 0.5 m/s per new building construction in a building complex.

• Journal of Chest Surgery
• /
• v.20 no.3
• /
• pp.536-543
• /
• 1987

The Fontan procedure was physiological correction which was initially applied to tricuspid atresia. We had used the modified Fontan operation in 8 cases at National Medical Center, Seoul, from Aug. 1984 to Oct. 1986. Age range was 20 months to 15 years [mean: 9 years] and male: female ratio was 5:3. 5 patients had tricuspid atresia [lb: 2 cases, Ic: 1 case, lib: 1 case, & llc: 1 case], 2 Patients had univentricular heart of left ventricular type, and one patient had transposition of great arteries with complete endocardial cushion defect. The operative principle was direct anastomosis between right atrium and pulmonary artery, whether main pulmonary artery or right pulmonary artery without any conduits. Postoperatively all patients needed high central venous pressure for adequate hemodynamic status in both survival [20-24 CmH2O] and mortality groups [20-24 CmH2O]. The fatal complications were as follows: empyema with bronchopleural fistula [1 case], bleeding tendency & brain damage [1 case], low cardiac output syndrome & acute renal failure [2 cases], and right to left shunt of unknown origin [1 case]. There were 5 hospital deaths; 3 of 5 tricuspid atresia patients, 1 of 2 univentricular heart patients, and 1 of 1 transposition of great arteries with complete endocar4ial cushion defect patient. The overall mortality was 62.5%. 3 survivors were nearly compatible with Choussat & Fontan criteria. Thus appropriate patient selection and experienced surgical technique were required for good results.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.29-32
• /
• 2001

This paper presents matrix inequality conditions for H$_2$optimal control of linear time-invariant descriptor systems in continuous and discrete time cases, respectively. First, the necessary and sufficient condition for H$_2$control and H$_2$controller design method are expressed in terms of LMls(linear matrix inequalities) with no equality constraints in continuous time case. Next, the sufficient condition for H$_2$control and H$_2$controller design method are proposed by matrix inequality approach in discrete time case. A numerical example is given in each case.

• Journal of Veterinary Clinics
• /
• v.31 no.2
• /
• pp.141-144
• /
• 2014

Two dogs (Case 1 weighing 27 kg, Case 2 weighing 42 kg) were referred with hindlimb lameness. On physical examination, there was moderate pain on stifle joint testing and mild cranial translation on cranial drawer testing in Case 1. This translation was obvious when the patient was under general anesthesia. Case 2 showed discomfort during hyperextension of the stifle joint, but no significant cranial translation under general anesthesia. Joint effusion was detected on radiography in both cases. Based on physiologic and radiographic examinations, cranial cruciate deficiency was suspected, so exploratory arthroscopy was performed. Arthroscopy revealed partial rupture of the cranial cruciate ligament (CrCL) in both cases. Case 1 showed unstable partial CrCL rupture, while Case 2 had stable CrCL rupture. Tibial tuberosity advancement (TTA) was carried out as planned. Seroma occurred one week postoperatively in Case 2, and was removed surgically. The patients returned to satisfactory weight-bearing ambulation 5 months after initial surgery. Based on the results of these cases, TTA appears to be a useful procedure in the treatment of CrCL partial rupture.

• The KIPS Transactions:PartD
• /
• v.13D no.2 s.105
• /
• pp.215-222
• /
• 2006

The importance of mobile software test is being addressed to improve the productivity and reliability of the software. Test automation technique based on mobile platform is required for effective application of mobile software test. That is, a technique is needed to generate test case for mobile platform API. When test case generated, software productivity and reliability are improved, while test duration and cost are decreased. In this paper, we identified test case generation scope through previous works about test automation, suggested keyword driven method, a test case generation technique on J2ME platform, and recognized that proposed method can be applicable to generating test case based on J2ME platform.

• Journal of Korean Elementary Science Education
• /
• v.22 no.1
• /
• pp.1-14
• /
• 2003

This study investigated the effects of the cognitive acceleration program devised for accelerating the development of formal reasoning ability of students. ‘Thinking Science’ activities developed by the Cognitive Acceleration through Science Education(CASE) project were implemented to 420 students in 5th grade aged 10+ in four elementary schools over a period of two yea. Homogeneity between the experimental group and control group was tested with SRT II, and the improvement of formal reasoning ability of the students was tested with SRT III. The results were analyzed by treatment, gender, and cognitive levels of the students. Statistically significant gains were shown in the CASE group compared with those in the control group. Cognitive level of girls in the CASE group increased as compared with the control group, while there was moderate effect in boys for the primary school. These results implied that the thinking science activities were effective in cognitive acceleration of girls aged 10+. It was shown that much more CASE students in concrete operational level shifted to formal operational level as compared with the control group while there were no significant effects in the other levels for primary school.

• Journal of Korean Society of Rural Planning
• /
• v.21 no.2
• /
• pp.189-199
• /
• 2015

This study made use of 9 types of utilizing idle farmland deducted from existing research in order to examine cases by type of idle farmland, and selected representative cases by type after analyzing contents of 165 available newspaper articles. Selected Cases were assorted into agricultural use and nonagricultural use, and agricultural use are as followed. (1)Community Service/Farming type is the case of Gimhae city reported on 'Busan Ilbo', (2)High Income/Farming type is the case of cooperative unit of Geumjeong crude drug in Yeongam appeared in 'Newsis', and the case of Omija industry in Mungyeong reported on 'Hankyoreh', (3)Tourism/Landscape/Farming type is the case of rape flowers and buckwheat flowers in Gupo village reported on 'Asia News Agency', (4)Stock Raising/Farming type is the case of growing foraging crops published in 'The Daejeon Ilbo', (5)Weekend farm type is the case of utilizing idle farmlands and creating weekend farm reported on 'Mediawatch', (6)High income/Forest type is creating Mulberry cultivation areas in Hamyang-Gun published in 'Yonhap News', (7)Ecology/Landscape/Forest type is forestation project of idle land reported on 'Newsis', (8)Agricultural Experience Study type is the case of managing agricultural experience study center in Dosun elementary center published in 'Sisajeju' and the case of non-agricultural application case, (9)Ecological Environment type is the case of wetland restoration of idle farmland in Gochang. This study investigated and arranged detailed contents by the literature search and interview investigation according to investigating items such as utilizing area, main agent, purpose, utilizing item, utilizing content, etc. by case. With that, it deducted implications as well as case characteristics, and finally suggested political proposals through the case analysis.

• Journal of Korea Water Resources Association
• /
• v.53 no.5
• /
• pp.347-356
• /
• 2020

The main objective of the study is to propose the most efficient SWAT model calibration method using SWAT-CUP with less computing time and high performance. In order to achieve the goal, Case1-3 (250, 500, and 1,000 simulation runs) and Case4 (1,000 simulation runs in the first iteration and then 500 simulation runs for the following iterations) were defined to compare the results. When evaluating the values of the objective function, Case2 and Case3 reached the same value after the fourth iteration, and Case1 reached the closed value of Case2-3 after the eighth iteration. However, the final estimates of the parameters had different ranges in Cases1-3, and only the results of Case3 and Case4 converged similarly. Thus, it can be considered that the parameter calibration results are highly affected by the initial number of simulation runs. On the other hand, SWAT simulation results did not show the significant difference after the first iteration, unlike the parameter ranges. From the analysis results, we can conclude that the most suitable and effective method was to repeat one or two times of iterations with a sufficient number of simulation runs, as in Case4.