• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2003년도 하계학술대회 논문집
• /
• pp.217-221
• /
• 2003

In this paper, the Viterbi decoder containing new branch metrics of the squared Euclidean distance with multiple order phase differences is introduced in order to improve the bit error rate (BER) in the differential detection of the trellis-coded MDPSK-OFDM. The proposed Viterbi decoder is conceptually same as the multiple Phase differential detection method that uses the branch metric with multiple phase differences. Also, we describe the Viterbi algorithm in order to use this branch metrics. Our study shows that such a Viterbi decoder improves BER performance without sacrificing bandwidth and power efficiency. Also, the proposed algorithm can be used in the single carrier modulation.

• 대한전자공학회논문지
• /
• 제10권1호
• /
• pp.18-26
• /
• 1973

AM파의 검파에 있어서 반송파의 주파수와 변조신호의 현파수와의 비가 10:1 이하로 되면 종래의 AM검파기로는 만족할만한 파형의 검파출력을 얻을 수 없다. 이와같이 초광대성 AM신호의 검파가 불가능하였든 것은 검파회로내에 있는 R-C 회로의 충방전현상으로 인한 것이며 이것이 AM 또는 FM초다중통신의 통신용량을 제안하는 한 원인이되고 있다. 본논문에서는 이 문제의 해결책으로서 다상포낙선검파법을 제안하며 아울러 동검파법의 이론적인 해석도 제시하였다. 본다상포낙선검파법을 이용하면 AM파의 반송파의 편파수와 변조신호의 편파수와의 비가 1:1에 가까울때에도 요구되는 여하한 충실도라도 충족시킬수 있는 AM검파파형을 얻을 수 있다. 본다상포낙선검파법의 이론적인 뒷받침을 위하여 본논문에서 제창한 두가지의 구성방안중에서 주파수변환방식을 대하여 실험하였다.

• Journal of Electrical Engineering and Technology
• /
• 제7권4호
• /
• pp.615-625
• /
• 2012

GPS attitude outputs or carrier phase observables can be effectively utilized to compensate the attitude error of the strapdown inertial navigation system. However, when the integer ambiguity is not correctly resolved and/or a cycle slip occurs, an erroneous GPS output can be obtained. If the erroneous GPS output is applied to the attitude determination GPS/INS (ADGPS/INS) integrated navigation system, the performance of the system can be degraded. This paper proposes an ADGPS/INS integration system using the triple difference carrier phase observables. The proposed integration system contains a cycle slip detection algorithm, in which the inertial information is combined. Computer simulations and flight test were performed to verify effectiveness of the proposed navigation system. Results show that the proposed system gives an accurate and reliable navigation solution even when the integer ambiguity is not correctly resolved and the cycle slip occurs.

• ETRI Journal
• /
• 제34권6호
• /
• pp.800-806
• /
• 2012

Transmission performances of direct detection-based 100-Gb/s modulation formats are investigated and compared for metro area optical networks. The effects of optical signal-to-noise ratio sensitivity, chromatic dispersion, cross-channel nonlinearity, and transmission distance on the performance of differential 8-ary phase-shift keying (D8PSK), differential phase-shift keying plus three-level amplitude-shift keying (DPSK+3ASK), and dual-carrier differential quaternary phase-shift keying (DC-DQPSK) are evaluated. The performance of coherent dual-polarization quadrature phase-shift keying (DP-QPSK) with block phase estimation and coherent DP-QPSK with digital differential detection are also presented for reference. According to our analysis, all three direct detection modulation formats could transmit a 100-Gb/s signal over several hundred kilometers of a single-mode fiber link. The results also show that DC-DQPSK outperforms D8PSK and DPSK+3ASK, and the performance of DC-DQPSK is comparable to that of coherent DP-QPSK with digital differential detection. The maximum transmission distance of DC-DQPSK is over 1,000 km, which is enough distance for metro applications.

• Journal of Information Processing Systems
• /
• 제17권5호
• /
• pp.933-946
• /
• 2021

In the non-orthogonal multiple access (NOMA) system, multiple user signals on the single carrier are superimposed in a non-orthogonal manner, which results in the interference between non-orthogonal users and noise interference in the channel. To solve this problem, an improved algorithm combining regularized zero-forcing (RZF) precoding with minimum mean square error-serial interference cancellation (MMSE-SIC) detection is proposed. The algorithm uses RZF precoding combined with successive over-relaxation (SOR) method at the base station to preprocess the source signal, which can balance the effects of non-orthogonal inter-user interference and noise interference, and generate a precoded signal suitable for transmission in the channel. At the receiver, the MMSE-SIC detection algorithm is used to further eliminate the interference in the signal for the received superimposed signal, and reduce the calculation complexity through the QR decomposition of the matrix. The simulation results show that the proposed joint detection algorithm has good applicability to eliminate the interference of non-orthogonal users, and it has low complexity and fast convergence speed. Compared with other traditional method, the improved method has lower error rate under different signal-to-interference and noise ratio (SINR).

• ETRI Journal
• /
• 제45권5호
• /
• pp.899-909
• /
• 2023

In mobile communication, the most exploratory technology of fifth generation is massive multiple input multiple output (MIMO). The minimum mean square error and zero forcing based linear detectors are used in multiuser detection for MIMO single-carrier frequency division multiple access (SCFDMA). When the received signal is detected and regularization sequence is joined in the equalization of spectral null amplification, these schemes experience an error performance and the signal detection assesses an inversion of a matrix computation that grows into complexity. Ordered successive interference cancelation (OSIC) detection is considered for MIMO SC-FDMA, which uses a posteriori information to eradicate these problems in a realistic environment. To cancel the interference, sorting is preferred based on signal-to-noise ratio and log-likelihood ratio. The distinctiveness of the methodology is to predict the symbol with the lowest error probability. The proposed work is compared with the existing methods, and simulation results prove that the defined algorithm outperforms conventional detection methods and accomplishes better performance with lower complication.

• 한국전자파학회논문지
• /
• 제29권10호
• /
• pp.783-790
• /
• 2018

주파수 도약(frequency hopping) 기법은 대역확산(spread spectrum) 방법 중 하나로, 광대역 상에서 반송파의 주파수가 고정되어 있지 않고, 다양한 주파수 채널로 도약하는 통신방식이다. 이러한 특성으로 인해 뛰어난 항재밍 성능, 낮은 탐지율 등의 장점을 가지고 있어, 군 통신에 자주 사용되고 있으며, 상용 통신에도 종종 사용되고 있다. 바꿔 말하면, 이런 주파수 도약 신호를 잘 탐지해내는 것은 매우 어려우며 중요한 연구분야 중 하나이다. 본 논문에서는 FFT를 이용한 신호 탐지를 할 때, 주파수 도약 신호의 탐지율을 증가시킬 수 있는 기법을 제안한다. 수신한 신호를 FFT를 이용하여 주파수 성분으로 변환시킬 경우, 스펙트럼 누설(spectral leakage)이 발생하여 탐지율이 낮아진다. 이때, 해밍 윈도우(hamming window)를 이용하여 문제를 해결하고 탐지율을 증가시킬 수 있는데, 주파수가 도약하는 환경에서는 윈도우가 오히려 성능 저하를 가져오기도 한다. 제안하는 기법은 주파수 변화에 대응하여 이러한 약점을 해결하였으며, 기존에 비해 최대 13 % 정도의 탐지율 향상을 얻을 수 있다.

• 한국항행학회논문지
• /
• 제8권1호
• /
• pp.26-37
• /
• 2004

차분 위성 항법에 있어서 빈번한 동적 변화를 수반하는 항체에 대하여 편향되지 않은 위치 추정치를 생성하기 위해서는 위상 평활화 코드 필터가 널리 사용되고 있다. 위치추정, 오차해석, 고장진단, 그리고 미지정수 결정 등 보정위성항법시스템의 다양한 응용분야에 있어서 정확한 오차공분산 정보는 중요한 역할을 담당한다. 반면, 기존의 위상 평활화 코드 필터 알고리즘들은 대부분 누적위상 측정오차에 의한 시전달 오차를 무시하므로 실재에 비하여 낙관적인 오차공분산 정보를 생성할 위험성을 내포하고 있다. 위상 평활화 코드 기법의 활용에 있어서 일관성 있고 적절한 오차공분산 정보를 생성하기 위하여 본 논문에서는 Stepwise Optimal Position Projection Filter와 Stepwise Unbiased Position Projection Filter 알고리즘을 제안하였다. 제안된 필터는 기존의 필터에 비하여 누적위상의 특성에 기인하는 시전달 오차의 특성을 정확하고 상세하게 고려하여 주며 잦은 가시위성의 변화도 함께 고려할 수 있는 장점을 가진다. 몬테카를로 시뮬레이션에 의하여 수신기 Kalman 필터, 기존의 위상 평활화 코드 필터, 그리고 제안된 두 필터들의 성능을 비교 분석 하였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권4호
• /
• pp.359-367
• /
• 2023

In order to ensure the high-integrity of reference stations of satellite navigation system, cycle slip should be precisely monitored and compensated. In this paper, we proposed a cycle slip algorithm for the integrity monitoring of the reference stations. Unlike the legacy method using the Melbourne-Wübbena (MW) combination and ionosphere combination, the proposed algorithm is based on ionosphere combination only, which uses high precision carrier phase observations without pseudorange observations. Two independent and complementary ionosphere combinations, Ionospheric Negative (IN) and Ionospheric Positive (IP), were adopted to avoid insensitive cycle slip pairs. In addition, a second-order time difference was applied to the IN and IP combinations to minimize the influence of ionospheric and tropospheric delay even under severe atmosphere conditions. Then, the cycle slip was detected by the thresholds determined based on error propagation rules, and the cycle slip was identified through weighted least square method. The performance of the proposed cycle slip algorithm was validated with the 1 Hz dual-frequency carrier phase data collected under the difference levels of ionospheric activities. For this experiment, 15 insensitive cycle slip pairs were intentionally inserted into the raw carrier phase observations, which is difficult to be detected with the traditional cycle slip approach. The results indicate that the proposed approach can successfully detect and compensate all of the inserted cycle slip pairs regardless of ionospheric activity. As a consequence, the proposed cycle slip algorithm is confirmed to be suitable for the reference station where real time high-integrity monitoring is crucial.

• 센서학회지
• /
• 제20권6호
• /
• pp.412-419
• /
• 2011

In this paper, we used the inter-bit noise detection method in order to reduce the effects of noise light in a visible light identification system that uses a visible LED as a carrier source. A visible light identification system consists of a reader and a transponder. When the enable signal from the reader is detected, the transponder encodes the response data in RZ(Return-to-Zero) bit stream and sends response signal by modulating a visible LED. The reader detects the response signal mixed with noise light, samples the noise voltage in each blank low time between data bits of the RZ signal, and recovers the original data by subtracting the sampled noise from the received signal. In experiments, we improved the signal-to-noise ratio by 20dB using the inter-bit noise detection method.