• 대한조선학회논문집
• /
• 제51권1호
• /
• pp.42-50
• /
• 2014

Lifting lugs are frequently used in shipyard to transportate and turn over blocks. As the shipbuilding technology develops, blocks has become bigger and bigger, and block management technology takes a more important role in shipbuilding to enhance the productivity. For the sake of economic as well as safe design of lug structure, more rigorous analysis is needed. In this study in order to investigate the strength characteristics of two type of lug, that is, D and T type lugs, non-linear strength analysis has been carried out to compare the ultimate strength characteristics of two types of lug varying in-plane and out-of-plane loading directions. Based on the present numerical analysis results, it can be drawn that T type lug is superior to D type lug from view points of ultimate strength and deformation.

• Bulletin of the Korean Chemical Society
• /
• 제25권9호
• /
• pp.1403-1407
• /
• 2004

Dielectric relaxation measurements on 3-nitrotoluene (3-NT) mixture of dimethylacetamide (DMA), dimethylformamide (DMF) and dimethysulphoxide (DMSO) have been carried out across the entire concentration range using Time domain reflectometry technique at 15, 25, 35 and $45^{\circ}C$ over the frequency range from 10 MHz to 20 GHz. For all the mixtures, only one dielectric loss peak was observed in this frequency range and the relaxation in these mixtures can be well described by a single relaxation time using Debye model. Bilinear calibration method is used to obtain complex permittivity ${\varepsilon}^{*}({\omega})$ from complex reflection coefficient ${\rho}^{*}({\omega})$ over frequency range 10 MHz to 20 GHz. The excess permittivity, excess inverse relaxation time, Kirkwood correlation factor, molar energy of activation are also calculated for these mixtures to study the solute-solvent interaction.

• Steel and Composite Structures
• /
• 제14권5호
• /
• pp.493-509
• /
• 2013

Bending behavior of reinforced concrete slabs encased over shallow I-sections at different levels of compression heads were investigated in present study. 1500 mm long I-sections were used to create composite slabs. Compression heads of monolithic experimental members were encased at different levels into the concrete slabs. Shear connections were welded over some of the I-sections. The testing was carried out in accordance with the principles of four-point loading. Results revealed decreasing load bearing and deflection capacities of composite beams with increasing encasement depths into concrete. Mechanical properties of concrete and reinforcing steel were also examined. Resultant stresses calculated for composite beams at failure were found to be less than the yield strength of steel beams. Test results were discussed with regard to shear and slip effect.

• 한국안전학회지
• /
• 제16권2호
• /
• pp.13-21
• /
• 2001

The effect of water spray for the fire sprinkler depends on droples distribution over maximum possible floor area. The present study are carried out for the characteristics of water spray and droplets experimentally and numerically km two fire sprinkler heads which are CHM head and CHl heal CHl head is self-production and CHl head is widely used up to date. As the result of using CHM head, water spray and droplets are distributed over large area because CHM head has smooth surface and non-flamed shape. When the pressure of fire sprinkler head is low, SMD(sauter mean diameter) is large and when the pressure of fire sprinkler head is high, SMD is small.

• 한국조경학회지
• /
• 제25권2호
• /
• pp.9-19
• /
• 1997

These studies were carried out to investigate seed propagation method and conducted using stem cuttings of Styrax japonicus for using as a woody landscape plant. The results are obtained as follows. After the H\sub2\SO\sub 4\ and GA\sub 3\ treatment to the seeds of Styrax japonicus, three months of warm treatment followed by cold stratification for four months increased seed germination rate. The rooting rate of Styrax japonicus was increased by the treatment with concentrated IBA, especially highest at 7,000ppm. Rooting percentages were highest for cuttings taken on July 15, 1995. Therefore, the most effective method for rooting of Styrax japonicus was treatment with 7,000ppm IBA on July 15 cuttings, which showed rooting rate of over 90%. Half-leaf-remained cuttings were more effective than those with two leaves on rooting of Styrax japonicus. Dipping for 10 seconds in IBA solution resulted in rooting rate of over 70%. The longer the treatment time the worse the rooting.

• 한국의류학회지
• /
• 제24권2호
• /
• pp.185-191
• /
• 2000

This survey was carried out to clarify the consumers' behavior related the purchase and use of women's dress shoes. The subjects participated in this study were 386 Korean women. Their age were ranged from 18 to 86 years. The results of this study were as following; 1. The most popular women's dress shoe sizes were 235 and 240. 2. 82.6% of subjects had experienced uncomfortable fit when they wore dress shoes. 3. The subjects aged over 30 years preferred low heel shoes. They valued wearing comfort above fashion trend in shoe design consideration. 4. The subjects aged under 30 years gave more emphasis on fashion trend than comfort and fit when they purchase dress shoes. 5. Consumer's experience of unfit with dress shoes was different with age. The younger subjects complained improper bottom sole shape. The older subjects had experience of unfit with outshell design and material. The subjects aged over 60 years thought that their dress shoe design was too narrow at the toe and lack for flexiblity of shoe material.

• 한국의류학회지
• /
• 제24권2호
• /
• pp.237-244
• /
• 2000

This study was carried out on 91 obese women who satisfied both of the conditions for obesity: over 1.6 in Rohrer index and over 90cm in bust girth. The purpose of this study was to analyze and classify the lower body of obese women and find out their respective characteristics. Twenty seven measurement items(21 direct measurement items and 6 indirect measurement items) were used for factor-analysis and cluster-analysis. In the study of lower body type, 7 factors were as a result of factor analysis and those factors were comprise 75.9% of total variance. Lower bodyshape were classified 3 types according to the cluster analysis. Type 1 was protrude of the hip, type 2 was short leg and protrude of the abdominal region and type 3 was obese of hip and long leg.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.528-530
• /
• 2003

We present here, some of the studies carried for estimation of rainfall over land and oceanic regions in and around South Korea. We use active and passive microwave measurements from TRMM ? TMI and Precipitation Radar (PR) respectively during a typhoon even named ? RUSA that took place during 30 Aug. 2002. We have followed due approach by Yao at. all (2002) and examined the performance of their algorithm using two main predictor variable, named as Scattering Index (SI) and Polarization Corrected Brightness Temperature (PCT) while using TMI data. The rainfall fnus estimated using PST and SI shows some Underestimation as compared to the 2A25 rainfall products from the PR in common area of overlap. A larger database thus would be used in future. To establish a new rain rate algorithm over Korean region based on the present case study.

• 자원리싸이클링
• /
• 제20권4호
• /
• pp.46-51
• /
• 2011

바렐도금에 사용되는 더미볼 스크랩에 함유되어 있는 주석 (Sn)을 회수하기 위하여 물리적 전처리, 침출 및 회수실험을 행하였다. 물리적 전처리를 통하여 철 성분의 회수율은 95% 이상 달성하였으며 또한, 후속 습식 공정에서 주석/니켈 분말에서 질산침출 조건에서 주석 성분의 회수율은 95% 이상의 결과를 얻었다.

• 한국기계기술학회지
• /
• 제13권4호
• /
• pp.125-130
• /
• 2011

Technological mode progress demands the use of materials at high temperature and pressure. Constant load creep tests have been carried out over the range of stresses at high temperatures. One of the most critical factors in considering such applications as the most critical one is the creep behavior. In order to investigate the creep behavior in this study, the stress exponents during creep were determined over the temperature range of $275^{\circ}C$ to $325^{\circ}C$ and the stress range of 36MPa to 72MPa. The applicability of modified Monkman-Grant relationship was also discussed.