• Carbon letters
• /
• 제1권2호
• /
• pp.82-86
• /
• 2000

The present research was undertaken to evaluate the possibility of water purification filter with activated carbon fibers (ACFs) using a very low cost precursor consisting of phenolic resin coated on glass fibers. The simplified procedure involving coating, curing and activation and a very low cost glass fiber as a raw material were adopted in order to reduce manufacturing cost. The breakthrough curves of the manufactured ACFs and the commercial activated carbon (AC, Calgon F-200) were investigated in the initial concentration range from 19 to 49 ppm for benzene, toluene and ethylbenzene. From breakthrough profiles, the manufactured ACFs had significantly faster adsorption kinetics than the AC. Especially the benzene breakthrough curves, the manufactured ACF (13 g of ACF with 32% of carbon on the glass) was over the limited level (5 ppb) after flowing of 32 l at initial concentration of 15 ppm, while the commercial AC was shown about 3 ppm in initial adsorption.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.215-217
• /
• 2000

• 한국분말재료학회지
• /
• 제26권6호
• /
• pp.502-507
• /
• 2019

Macro-porous carbon foams are fabricated using cured spherical phenolic resin particles as a matrix and furfuryl alcohol as a binder through a simple casting molding. Different sizes of the phenolic resin particles from 100-450 ㎛ are used to control the pore size and structure. Ethylene glycol is additionally added as a pore-forming agent and oxalic acid is used as an initiator for polymerization of furfuryl alcohol. The polymerization is performed in two steps; at 80℃ and 200℃ in an ambient atmosphere. The carbonization of the cured body is performed under Nitrogen gas flow (0.8 L/min) at 800℃ for 1 h. Shrinkage rate and residual carbon content are measured by size and weight change after carbonization. The pore structures are observed by both electron and optical microscope and compared with the porosity results achieved by the Archimedes method. The porosity is similar regardless of the size of the phenolic resin particles. On the other hand, the pore size increases in proportion to the phenol resin size, which indicates that the pore structure can be controlled by changing the raw material particle size.

• Carbon letters
• /
• 제4권3호
• /
• pp.126-132
• /
• 2003

Granular Activated Carbon (GAC) has been proven to be an excellent material for many industrial applications. A systematic study has been carried out of the kinetics of physical as well as chemical activation of phenolic resin chars. Physical activation was carried out using $CO_2$ and chemical activation using KOH as activating agent. There are number of factors which influence the rate of activation. The activation temperature and residence time at HTT varied in the range $550{\sim}1000^{\circ}C$ and $\frac{1}{2}{\sim}8$ hrs respectively. Kinetic studies show that the rate of chemical activation is 10 times faster than physical activation even at much lower temperature. Above study show that the chemical activation process is suitable to prepare granular activated carbon with very high surface area i.e.$ 2895\;m^2/g$ in short duration of time i.e. 1 to 2 hrs at lower temperature i.e. $750^{\circ}C$ from phenolic resins.

• Composites Research
• /
• 제16권3호
• /
• pp.49-57
• /
• 2003

본 연구에서는 항공기 구조재로 활용되고 있는 카본/에폭시 복합재료와 기체 외부 열차단용 소재로 추천되고 있는 실리카/페놀 및 카본/페놀 복합재료 2종에 대하여 고온 환경하에서 인장시험을 행하였다. 고온용 스트레인게이지를 응용하여 각각의 복합재료에 대한 온도변화에 따른 인장강도, 탄성계수, 프와송비 같은 기계적 물성치를 도출하였으며, 복합재료 방향성에 따른 기계적 물성 및 인장 거동을 강화재 종류별로 비교 고찰하였다. 본 연구결과를 통하여 획득된 기초자료들은 항공기 구조재 및 열차단용 내열재료를 이용한 복합 구조재의 설계 및 해석에 응용되었다.

• Carbon letters
• /
• 제4권2호
• /
• pp.86-92
• /
• 2003

A series of micro- and mesoporous activated carbons were prepared from two kinds of phenolic resin using a metal treated chemical activation methodology. $N_2$-adsorption data were used to characterize the surface properties of the produced activated carbons. Results of the surface properties and pore distribution analysis showed that phenolic resin can be successfully converted to micro- and mesoporous activated carbons with specific surface areas higher than 973 $m^2/g$. Activated carbons with porous structure were produced by controlling the amount of metal chlorides ($CuCl_2$). Pore evolvement depends on the amount of additional metal chloride and precursors used. From the SEM and EDX data, copper contents were shown to be most effected by the incremental addition of metal chloride.

• Macromolecular Research
• /
• 제13권3호
• /
• pp.194-205
• /
• 2005

The network structure of Ni-coated carbon black (NCB) composites filled with phenolic resin was investigated by means of using scanning electron microscopy, viscosity, interfacial tension, shrinkability, Flory-Huggins interaction parameters, and swelling index. The electrical properties of the composites have been characterized by measurement of the specific conductivity as a function of temperature. Additionally, the variation of conductivity with temperature for the composites has been reported and analyzed in terms of the dilution volume fraction, relative volume expansion, and barrier heights energy. The thermal stability of phenolic-NCB composites has been also studied by means of the voltage cycle processes. The experimental data of EMI wave shielding were analyzed and compared with theoretical calculations. The mechanical properties such as tensile strength, tensile modulus, hardness and elongation at break (EB) of NCB-phenolic resin composites were also investigated.

• 한국세라믹학회지
• /
• 제37권3호
• /
• pp.280-287
• /
• 2000

Adsorption behavior and amount of phenolic resin followed silica (SiO2) formation onto silicon nitride(Si3N4) surface were investigated using electrokinetic sonic amplitude (ESA) technique and with UV spectrometer, to fabricate Si3N4/SiC nano-composite based on reaction between SiO2 formed and phenolic resin absorbed onto Si3N4 particle. The amount of SiO2 formed and carbon from phenolic resin absorbed onto Si3N4 surface were calculated quantitatively to adjust the reaction between SiO2 and phenolic resin, resulting in no residual SiO2 and carbon. As a result, pre-heated tempeature for optimized reaction was below 25$0^{\circ}C$, in which there was no residual SiO2 and carbon.

• Preventive Nutrition and Food Science
• /
• 제2권4호
• /
• pp.316-320
• /
• 1997

Phenolic acids are regarded as harmful materials in food and environment science but recently, as useful materials, and thus adsorption is recommended as an effective separation technique to recover or remove phenolic acids from diluted solution. If the adsorbed phenolic compounds were useful materials, the materials should be recovered through desorption. Desorption using supercritical carbon dioxide(SC-$CO_2$) was tried to separate food-borne phenolic acids from charcoal in single solute system. In the comparisons of desorption amounts, gallic acid had the lowest lolubiligy to SC-$CO_2$. Gallic acid has more hydroxy functional groups than the other phenolic acids, which was immiscible with nonpolar SC-$CO_2$. Ferulic acid was yielded more than p-coumaric acid, because ferulic acid had much bigger molecular weight, which was affected more by van der Waas force. It was found that the most affecting factor on desorption amounts was the solubility of phenolic acids to SC-$CO_2$. The second affecting factor was van der Waals force. Response surface methodology(RSM) was conducted to read the trend of desorption. Increasing density of SC-$CO_2$ raised solubility of phenolic acids.

• 접착 및 계면
• /
• 제11권4호
• /
• pp.149-154
• /
• 2010

단일 탄소섬유/페놀수지 및 탄소나노튜브-페놀수지 복합재료의 계면적 특성을 젖음성과 함께 전기저항 측정 및 미세역학시험법을 사용하여 평가하였다. 순수 페놀수지 및 탄소나노튜브-페놀수지 복합재료의 Broutman시편을 사용한 압축강도는 인장강도와 비교하였다. 탄소나노튜브-페놀수지 복합재료의 접촉저항은 2점 및 4점법에 의한 경사형 시편을 사용하여 측정하였다. 동적접촉각에 의한 표면에너지와 젖음성은 Wilhelmy 플레이트 법으로 측정하였다. 표면에서 탄소나노튜브가 불균일한 미세구조로 형성되므로, 동적접촉각은 90도 이상의 소수성을 나타내었다. 탄소나노튜브-페놀수지 복합재료는 보다 나은 응력전달 효과에 기인하여 순수 페놀수지보다 더 큰 겉보기 강성도를 보여주었다. 단일 탄소섬유와 탄소나노튜브-페놀수지 복합재료간의 접착일, $W_a$은 탄소나노튜브 첨가로 인한 점도 증가 때문에, 순수 페놀수지 보다 더 크게 나타났다. 이는 마이크로 풀 아웃 시험에서 단일 탄소섬유의 미세파손 형태와 일치함을 보여 주었다.