• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.31-35
• /
• 2006

Degradation characteristics of filament-winded composites due to accelerated environmental aging have been evaluated under high temperature, water immersion and thermal impact conditions. Two kinds of laminated composites coated by an urethane resin have been used: carbon-fiber reinforced epoxy(T700/Epon-826, CFRP) and glass-fiber reinforced phenolic (E-glass/phenolic, GFRP). For tensile strength of $0^{\circ}$ composites, CFRP did high reduction by 25% under the influence of high temperature and water while CFRP showed little degradation. However for water-immersed $90^{\circ}$ composites both CFRP and GFRP showed high reduction in tensile strength. Bending strength and modulus of $90^{\circ}$ composites were largely reduced in water-immersion as well as high temperature environment. Urethane coating on the composite surface improved the bending properties by 20%, however hardly showed such improvement for water-immersed $90^{\circ}$ composites.

• 한국공작기계학회논문집
• /
• 제12권6호
• /
• pp.71-76
• /
• 2003

Optimal design of panel with trapezoidal type stiffeners was studied using linear and nonlinear deformation theories. Also analysis method was using closed-form analysis and finite difference energy methods, respectively. Various bucking load factors are obatined for stiffened laminated composite panel with trapezoidal type stiffeners and various aspect ratios, which are made from Carbon/Epoxy USN 125 prepreg and are simply-supported on four edges under uniaxial compression. Optimal design analyses are carried out by the nonlinear search optimizer, ADS.

• 한국해양공학회지
• /
• 제11권4호
• /
• pp.23-30
• /
• 1997

The purpose of this paper is to investigate the water environmental effect on the mechanical properties of carbon fiber/epoxy composites. Moisture concentration absorbed in CFRP under various water environment was calculated and degradation of mechanical properties for each wet composite laminates is investigated by performing the flexual and tensile test. The results show that moisture absorption is accelerated in higher temperature environment and under the same temperature sea water environment prompts more absorption than fresh water. As increasing the water temperature and moisture concentration tensile and flexual strength decreased as much as 25%-40% compared with dry condition.

• 한국자동차공학회논문집
• /
• 제4권4호
• /
• pp.147-155
• /
• 1996

The purpose of present paper is to estimate the static and fatigue bending strengths of CFRP(carbon fiber reinforced plastic) laminates having impact damage(FOD). The specimens which are formed with the different stacking composition, EPOXY and PEEK matirx and orthotropic and quasi-isotropic laminated plates, are prepared for this experiment. A steel ball is impacted on CFRP laminates, generating impact damages, and the three-point fatigue bending test is carried out by using the impacted laminates to investigate the influence of the stackin composition on the fatigue strength of CFRP laminates.

• 유변학
• /
• 제6권1호
• /
• pp.10-19
• /
• 1994

에폭시수지와 CFRP 복합체 구조물의 경화공정 중에 발생하는 잔류응력은 구조물의 기계적물성에 영향을 미친다. 따라서 잔류응력을 낮추기 위해 여러 가지 방법들이 발표되고 있다. 이연구에서는 잔류응력을 낮추는 방법으로 잔류응력의 발새mechanism을 이해하고 반 응속도식과 여러 가지 기초물성을 기초로 한 computer simulation pro-gram을 이용하여 에 촉시수지와 복합체 구조물의 잔류응력을 최소화하는 경화공정을 찾는 연구를 진행하였다. 경화과정에서는 대부분의 경화온도가 구조물의 유리전이온도보다 높기 때문에 잔류응력이 발생하지 않고 대부분의 잔류응력은 냉각과정에서 발생하였다. 잔류응력을 정량화하는 방법 으로 구조물의 표면이 유리전이온도에 도달하였을때 내부 비체적분초를 상대적인 잔류응력 이라 간주하였다. 컴퓨터모사에 의해 최종경화온도와 냉각속도를 바꾸면서 잔류응력을 모사 한 결과 최종경화온도가 낮을수록, 냉각속도가 작을수록 잔류응력이 작게 발생하였다.

• 한국생산제조학회지
• /
• 제21권6호
• /
• pp.1003-1007
• /
• 2012

A nondestructive technique would be very useful. Advanced NDE T-ray (terahertz ray) techniques of technology and instrumentation has provided a probing field on the electromagnetic spectrum. However, the T-ray is limited in order to penetrate a conducting material to some degree. Here, the T-ray would not go through easily the CFRP composite laminates since carbon fibers are electrically conducting while the epoxy matrix is not. So, investigation of terahertz time domain spectroscopy (THz TDS) was made and reflection and transmission configurations were studied for a 48-ply thermoplastic PPS(poly-phenylene sulfide)-based CFRP solid laminate. It is found that the electrical conductivity of CFRP composites depends on the direction of unidirectional fibers.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권2호
• /
• pp.93-102
• /
• 2001

The objective of this experimental study is to evaluate the strengthening effects of concrete compression confined with Epoxy-boned compound fiber sheets. An analytical model is proposed to construct a stress-strain relationship for confined concrete. Test results are summarized as followed. While non-FRP lateral confinement specimens appeared sudden failure after shell concrete was torn off, specimens confined laterally with FRP were showed that their failure. Specially, Glass fiber lateral confined specimens occurred obviously increase ductility ability. Hence, concrete specimen with lateral confinement by Hi-carborn and Aramide. Glass fiber simultaneously can be increased in not only strength but also a lot of ductility ability.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1997년도 제9회 학술강연회논문집
• /
• pp.31-31
• /
• 1997

우수한 비강성과 비강도를 지닌 복합재료를 이용한 자동차용 추진축(Propeller Shaft)의 사용은 자동차의 구조정량화, 소음/진동 감소, 승차감 향상 측면에서 개선된 효과를 기대할 수 있다. 본 연구에서는 탄소섬유/에폭시 필라멘트 와인딩(Filament Winding) 공빔을 적용한 복합재료 튜브와 금속재 플랜지 그리고 유니버셜 조인트로 구성된 상용 차의 추진축 개발과정 중 축의 진동특성에 대한 적합한 형상과 물성을 찾기 위해 유한요소법을 적용한 자유진동 해석과 FFT 해석장비를 이용한 진동실험 그리고 축을 운용속도까지 회전시켜 공진(Resonance) 현상 발생 유무를 소음량의 측정으로 판단하는 시험이 수행되었다. 그 결과 요구조건에 적합한 진동특성을 나타내는 추진축의 형상을 결정할 수 있었다.

• 한국정밀공학회지
• /
• 제29권9호
• /
• pp.938-945
• /
• 2012

To design and estimate material failures of Type III pressure vessels, which have excellent stability and performance, various modeling techniques have been introduced. This paper provided a hybrid modeling technique composed of ply-based modeling for a cylinder part and laminate-base modeling technique for a dome part for enhancing modeling efficiency. The ply-based modeling technique provided accurate ply stresses directly for predicting material failure, on the other hand, additional manipulations in stress calculations, which may cause some errors, were needed for the case of the laminate-based modeling technique. The ply stresses in fiber, transverse and in-plane shear directions were compared with the corresponding material strengths to predict material failure.

• 한국기계가공학회지
• /
• 제17권4호
• /
• pp.32-38
• /
• 2018

In this study, the one-piece propeller shaft composed of carbon/epoxy was designed and manufactured for 4 wheel drive automobiles that can bear the target torsional torque performance of 3.5kN.m. For the CFRP tube, braiding machine was used to weaving carbon fiber and it was formed the braided yarns with the braid angle ${\pm}45^{\circ}$ and axial yarns to improve strength of the lengthwise direction. The final CFRP tube of propeller shaft was evaluated through the torsional torque test. The CFRP propeller shaft satisfied requirement of the target torsional maximum torque of 3.5kN.m. Also, it was found that the one-piece composite propeller shaft with CFRP tube had 30% weight saving effect compared with a two-piece steel propeller shaft.