• KSBB Journal
• /
• v.10 no.1
• /
• pp.78-88
• /
• 1995

The encapsulatpd A. niger grew up inside the capsule and mycelia penetrated through the pore of the capsule membrane. The mycelia on the capsule wall became loose when the carbon source and oxygen were deficient in the medium. On the contrary, the production rate increased and mycelia made a lump tightly when the carbon source and oxygen were sufficient. Namely, number of proper capsule of unit volume in the medium was existed. The phenomenon which was swelled of capsule membrane in cultivation could prevented by adding CaCl2 into the medium. According to the time adding CaCl2 into the medium, the production rate of citric acid was influenced. In case of adding CaCl2 into the medium at 7th day cultivation, the production yield of citric acid was increased about 40 percent higher than that of adding CaCl2 initially. The production yield of citric acid using encapsulated A. niger of flask culture was influenced with oxygen supply. The production yield of citric acid ($\Delta$p/$\Delta$s) of the flask culture was increased 3.88 time by using T-flask instead of parafilm sealed flask. Therefore, the productivity and consumption rate concerning production which was taken carbon source were increased when oxygen supply was sufficient. The production of citric acid using encapsulated A. niger was increased average 30 percent higher than that of bead in between 6th and 13th day cultivation.

• The Korean Journal of Mycology
• /
• v.9 no.1
• /
• pp.7-12
• /
• 1981

Attempts were made to investigate the effects of the temperature and carbon dioxide concentration in the growing room and soil moisture after casing on the mycelial growth, sporophore formation and mushroom yield of Agaricus bisporus (Lange) Sing. The growing room temperature influenced the mycelial growth in the casing layer after casing and the sporophore formation of Agaricus bisporus. The mycelial growth was the rapidest at $30^{\circ}C$ and gradually decreased with the temperature going down, while the sporophore formation and mushroom yield were the best at $25^{\circ}C$. The other factor which affected the mycelial growth and sporophore formation was the moisture content of casing soil. The mycelial growth was the best at 70 percent moisture, and the sporophore formation and mushroom yields were the highest at 60 percent moisture. The concentration of carbon dioxide in the growing room after casing had an important effect upon the mycelial growth in the casing layer and the sporophore formation. When the concentration of carbon dioxide was 0.16 percent, the mycelial growth and the sporophore formation were not inhibited. At 0.5 to 2.0 percent $CO_{2}$ the myceilal growth and the sporophore formation were severely decreased. The sporophore size of the mushroom was the maximum when the room temperature during the vegetative mycelium growth was $20^{\circ}C$ and the moisture content of casing soil was 70 percent.

• The Korean Journal of Mycology
• /
• v.22 no.2
• /
• pp.145-152
• /
• 1994

In order to investigate the cultural characteristics of Lentinus lepideus, media, pH, carbon sources, nitrogen sources, vitamin and organic acids were tested in submerged culture. It grew well in GPB(broth), and the optimum temperature and pH was $25^{\circ}C$ and 4.2, respectively. The carbon sources such as galactose belong to monosaccharide and maltose belong to disaccharide were effective for mycelial growth. Peptone which is compound nitrogen source was good for mycelial yield but the other nitrogen sources were not effective. Among the various vitamins, pyridoxine is suitable for mycelial yield. Among the various organic acids, citric acid promoted the mycelial yield but acetic acid interrupted the mycelial growth of L. lepideus.

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.848-854
• /
• 1998

To concentrate polyunsaturated fatty acids from anchovy oil by supercritical carbon dioxide $(SC-CO_2)$, effects of different adsorbents, cosolvents and extraction pressures on the extraction yield and fatty acid composition in the extract and the residue fractions were investigated. Anchovy oil mixed with silver nitrate-coated silica gel showed higher extraction yield and concentration of EPA and DHA in the residual fraction than that mixed with only silica gel at $60^{\circ}C/345{\;}bar$. Ethyl acetate was a promising cosolvent for concentrating polyunsaturated fatty acids in the residual fraction from anchovy oil mixed with silica gel. For the extraction pressures tested, 276 bar showed a maximum value in the extraction yield and concentration of EPA and DHA in the residue. Starting with anchovy oil containing 13.3% EPA and 16.2% DHA mixed with a silver nitrate-coated silica gel, the residue fraction containing 28.2% EPA and 38.3% DHA was obtained when ethyl acetate was used as a cosolvent with $SC-CO_2$ at $60^{\circ}C/276{\;}bar$.

• Food Engineering Progress
• /
• v.15 no.2
• /
• pp.175-181
• /
• 2011

By using supercritical carbon dioxide fluid, an attempt was made to extract surface-active substances from defatted rice bran. Extraction was carried out according to D-optimal design and results were analyzed by response surface methodology to establish optimum condition. It was found that pressure, temperature and co-solvent (ethanol) influenced in a different extent on the extraction efficiency (i.e., yield and interfacial tension) of surface-active substances. Among them, co-solvent was found to be a major influencing factor, where maximum yield (2.62%) was observed at the highest content (250 g). In addition, it also affected most on the interfacial tension at the oil-water interface but in this case the lowest interfacial tension value (9.51 mN/m) was found when added lowest (50 g). In conclusion, it was estimated that the optimum extraction condition was to be pressure 350bar, temperature $62^{\circ}C$ and co-solvent content 50 g in this study, where extraction yield was 0.69% and interfacial tension to be 10.1 mN/m.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.2
• /
• pp.113-121
• /
• 2019

Single walled carbon nanotube (SWCNT) has been used as a material for reinforcing various advanced materials because it has superior mechanical properties. However, pure SWCNT that does not have any functional group has a hydrophobic character, and exists as bundles due to the strong Van der Waals attraction between each SWCNT. Due to these reasons, it is very difficult to disperse SWCNTs in the water. In this work, in order to use SWCNT for production of cementitious composites, SWCNT was first dispersed in water to make an aqueous solution. Sodium deoxycholate (DOC) and Sodium dodecyl sulfate (SDS) were chosen as surfactants, and the dosage of DOC and SDS were 2wt% and 1wt%, respectively. Sonication and ultracentrifugation were applied to separate each SWCNT and impurities. Using such processed SWCNT solutions, cement paste was prepared and its shear stress vs. strain rate relationship was studied. The yield stress and plastic viscosity of cement paste were obtained using Bingham model. According to the results in this work, cement pastes made with DOC and SDS showed similar rheological behavior to that of air entrained cement paste. While cement paste made with DOC 2 wt.% SWCNT solution showed similar rheological behavior to that of plain cement paste, cement paste made with SDS 1 wt.% SWCNT solution showed different rheological behavior showing much less yield stress than plain cement paste.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.683-691
• /
• 2021

The purpose of this study is to measure the yield and to evaluate the physiological activity of Cannabis sativa seed(Hemp seed) extracts extracted using a density fluctuation supercritical carbon dioxide for each temperature condition-30℃(HSSE30), 45℃(HSSE45), 60℃(HSSE60), and to enable dissolution of the poorly water-soluble extracts by liposome formulation and to enhance the skin permeability. As a result of the yield measurement, HSSE60 showed the highest yield, and in the antioxidant activities, HSSE45 had the highest total polyphenol content, and showed the highest DPPH, ABTS+ radical scavenging activities at the highest concentration of the extracts. As a result of the antimicrobial susceptibility testing, a clear zone appeared only in the Propionibateium acnes strain. It was confirmed that particle size was reduced and the absolute value of the zeta potential increased in the case of the formulation in which the extracts were in liposomes than in the formulation in which the extracts were dissolved in deionized water, and the skin permeability was improved. Based on these experimental results, we confirmed the possibility of using the hemp seed supercritical carbon dioxide extracts, a poorly water-soluble extract, can be applied as a functional natural material for cosmetics.

• Korean Journal of Food Science and Technology
• /
• v.13 no.3
• /
• pp.233-240
• /
• 1981

Nutritional characteristics of mycelial growth and fruit-body formation of Flammulina velutipes in synthetic media were investigated. The results are summarized as follows: 1. Among sugar substances, mannitol gave rapid mycelial growth and formation of fruit-body with higher yield, and among organic acids only succinic acid showed the fruit-body but poorly. Ethyl alcohol and glycerol comparatively promoted the formation of the fruit-body with higher yield. 2. Among nitrogen sources, peptone resulted in rapid mycelial growth and fruit-body formation with higher yield. and among amino acids glycine gave fast fruit-body formation with higher yield. However. nitrite nitrogen, lysine and methionine showed no mycelial growth at all. 3. The concentration of substances tended to affect the fruit-body formation and yield. Lower concentration of mannitol and peptone prompted fruit-body formation but with low yields, and higher concentration delayed the fruit-body formation with increased yields.

• Journal of Hydrogen and New Energy
• /
• v.23 no.3
• /
• pp.199-206
• /
• 2012

HC-SCR was conducted over Co-Pt/ZSM5 catalyst coated over 200 cpsi cordierite in the condition of atomspheric pressure and $200^{\circ}C-500^{\circ}C$. Weight ratio of Co/Pt determined from EDX analysis was 8/2, which was almost equal to the weight ratio at preparation step. XPS showed that nitrates within cobalt precursor and chlorine withn Pt precursor were removed. TEM result demonstrated that crystallite size of cobalt and Pt was under 5nm. Among these tested hydrocarbon reductants, isobutane ($i-C_4H_{10}$) showed the highest de-$NO_x$ yield of 80% under the condition of the mole ratio of reductant/NOx=1.0 at $180^{\circ}C$. De-$NO_x$ yield from HC-SCR was increased as the carbon number of hydrocarbon reductant was increased. The decrease of bonding energy between C and H of HC reductant played a role to increase of de-$NO_x$ yield, which indicated that the dissociation step of C-H bond of hydrocarbon molecule might be the rate determining step of HC-SCR. The increase of oxygen concentration in the feed resulted in the decrease of de-$NO_x$ yield but the increase of CO and $N_2O$ yield.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.252-252
• /
• 2022

Genotype-by-environment interaction (GEI) refers to the comparative response of genotypes to different environments conditions. Thus, understanding GEI is a fundamental component for selecting superior genotypes for breeding programs. The significance of utilizing early maturing cultivars not only provides flexibility in planting dates, but also serves as an effective strategy to reduce methane emission from the paddy fields. In this study, we conducted multi-environment trials (METs) to evaluate yield-related traits such as culm length, panicle length, panicle number, spikelet per plant, and thousand grain weight. A total of eighty-one Korean commercial rice cultivars categorized as early maturing cultivars, were cultivated in three regions, two planting seasons for two years. The genotype main effect plus genotype-by-environment interaction (GGE) biplot analysis of yield-related traits and grain yield explained 70.02-91.24% of genotype plus GEI variation, and exhibited various patterns of mega-environment delineation, discriminating ability, representativeness, and genotype rankings across the planting seasons and environments. Moreover, simultaneous selection using weighted average of absolute scores from the singular value decomposition (WAASB) and multi-trait stability index (MTSI) revealed six highly recommended genotypes with high stability and crop productivity. The winning genotypes under specific environment can be utilized as useful genetic materials to develop regional specialty cultivars, and recommended genotypes can be used as elite climate-resilient parents to improve yield-potential and reduce methane emission as part to accomplish carbon-neutrality.