• Korean Journal of Food Science and Technology
• /
• v.30 no.3
• /
• pp.574-580
• /
• 1998

The technical feasibility of removing cholesterol from milk fat by supercritical carbon dioxide $(SC-CO_2)$ extraction followed by adsorption on different adsorbents and of fractionating milk fat into different fatty acid composition at $40^{\circ}C/276$ bar was investigated. Cholesterol could be selectively removed from milk fat by adsorption on a typical commercial florisil with $SC-CO_2$ extraction. Lower weight ratio of milk fat feed to florisil showed higher reduction of cholesterol, but gave lower yield in the milk fat fractions. The effective capacity of florisil for removing cholesterol from milk fat was 2.0g/g, which is the ratio of the fat feed to the adsorbent for 89% cholesterol reduction with a fat yield of 57.5%. Fatty acid composition showed higher short-chain and lower unsaturated long-chain fatty acids in the extracted fractions. Milk fat fractionation method by supercritical fluid extraction in coupled with adsorption would appear suitable for removing undesirable ingredients such as cholesterol and for enriching short-chain fatty acids in the fractions.

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.1036-1042
• /
• 2002

During storage at $25^{\circ}C$, the effect of gas absorbents, such as carbon dioxide scavenger, ethylene absorber, and their combinations, on respiration characteristics and quality attributes of mature-green Mume fruits packaged in $30\;{\mu}m$ low density polyethylene (LDPE) film was examined. Changes in quality attributes of the fruits were observed in terms of weight loss, titratable acidity, pH, fish firmness, color, water-soluble solid, and chlorophyll contents. In the presence of ethylene absorber $(KMnO_4)$, the physiological injury was remarkably suppressed, and there was no significant injury in Mume fruits at $25^{\circ}C$ for 10 days. Yellowing and softening were also noticeably reduced by the combination of plastic film packaging and inclusion of ethylene absorber. The respiration rate was slower in fruits sealed with ethylene absorber than in those with absorbent-free packaging. Using ethylene absorber, levels of oxygen and carbon dioxide were maintained at 2-3 and 7-8%, respectively, during storage at $25^{\circ}C$ for 10 days. The addition of carbon dioxide scavenger $(Ca(OH)_2)$, negatively affected the quality attributes and respiration characteristics of the fruits. Overall results showed that ethylene removal by gas absorbent in the film packages significantly prolonged the shelf life of the fruits at ambient temperature.

• Journal of Hydrogen and New Energy
• /
• v.16 no.1
• /
• pp.74-81
• /
• 2005

The heat treatment of serpentines for mineral carbonation was studied systematically. Crystallographic, spectroscopic and thermochemical properties were investigated for serpentines before and after heat treatment. Drastic weight loss due to the removal of hydroxy groupe(-OH) occupied in serpentine crystalline was revealed after heat treatment. In XPS results, MgO was founded at heat treated serpentine powders while Mg(OH) was observed at untreated serpentine powders. Metallic oxides originated from serpentine ingredients were regenerated by heat treatment.

• Journal of Animal Environmental Science
• /
• v.6 no.3
• /
• pp.153-160
• /
• 2000

Odor control for livestock and compost facilities has focused on manure handling and treatment during storage and land application, however, large amount of malodorous air is emitted and it is one of main sources of malodour in livestock farming. Biological treatment or biodegradation involves converting an organic contaminant to carbon dioxide and water using natural bacteria. Biofiltration is an effective air pollution control technology that uses microorganisms to breakdown gaseous contaminants and produce innocuous end products. Investment and operating costs on the biofiltration are lower than for thermal and chemical oxidation processes. This paper is intended to provide an overview of basic design and operating criteria for biofilters to control odors from livestock and compost facilities.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.506-507
• /
• 2003

전 세계적으로 이산화탄소를 저감하기 위한 연구활동이 활발히 진행중이나 현재까지는 산업생산성에 영향을 미치지 않을 정도로 경제적인 이산화탄소 저감법은 개발이 되지 않은 실정이다. 미국, 일본 등 선진국을 중심으로 각국별 사정에 맞는 이산화탄소 저감법을 연구중인데, 대표적인 기술로는 흡수법, 흡착법, 생물학적 고정화, 막분리법, 심냉법, 산소연소법 등이 있다. 각 기술별로 장·단점이 있지만 배출되는 이산화탄소 중 보다 많은 양을 줄이기 위해서는 발전소, 철강업 그리고 시멘트업 등과 같은 대규모 발생원에서 발생되는 배기가스 중 함유된 이산화탄소를 저감하는 것이 효율적이다.(중략)

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.504-506
• /
• 2011

최근 실내공기질에 대한 관심이 높아지면서 실내공간에서의 이산화탄소 처리 방법에 대한 연구도 활발히 이루어지고 있다. 본 연구는 실내공간에서의 이산화탄소를 흡착으로 저감할 수 있도록 제올라이트를 개질한 흡착제를 만들고, 이를 통하여 실내공간용 저농도 이산화탄소의 흡착특성을 알아보았다. 흡착제 제조시에 흡착성능에 영향을 미치는 전처리 온도를 변수로 하여 흡착제의 이산화탄소 흡착 특성을 알아보았다. 실험결과 각 합성 변수에 따른 흡착제의 안정성과 특성을 이용하여 최적 합성 방법을 도출할 수 있었으며, 이를 통해 기존 제올라이트보다 우수한 흡착성능을 구현할 수 있었다.

• 보존과학연구
• /
• s.11
• /
• pp.1-9
• /
• 1990

The environmental controls for good conservation of all textile materials are follow as :1) Special RH conditions on textiles keep to the usually advocated 50∼55%.2) The effect of the temperature is too small to worry about in the applicable range, that is $20^{\circ}C$.3) It is important to keep soiling by air borne dirt to a minimum by an air filter or putting textiles in cases.4) Sulphur dioxide must be rekoved by an activated carbon filter or a water spray. And this concentration below $50\muGm^3$ can be regarded assatisfactory.5) Oxygen plays a part of deterioration proceses. The effect of nitrogend andinert gases in sealed show cases should be further studied.6) Ozone is detrimental to textiles. It can be removed by activated carbonfilter.7) The removal of UV radiation and blue light can be expected to increase the lifetime of dyeing and strength of fiber.50 lux is suggested for sensitive textile materials.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.51-61
• /
• 2022

Gas separation via hollow fibre membrane modules (HFMM) is deemed to be a promising technology for natural gas sweetening, particularly for lowering the level of carbon dioxide (CO₂) in natural gas, which can cause various problems during transportation and process operation. Separation performance via HFMM is affected by membrane properties, module specifications and operating conditions. In this study, a mathematical model for HFMM is developed, which can be used to assess the effects of the aforementioned variables on separation performance. Appropriate boundary conditions are imposed to resolve steady-state values of permeate variables and incorporated in the model equations via an iterative numerical procedure. The developed model is proven to be reliable via model validation against experimental data in the literature. Also, the model is capable of capturing axial variations of process variables as well as predicting key performance indicators. It can be extended to simulate a large-scale plant and identify an optimal process design and operating conditions for improved separation efficiency and reduced cost.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.3
• /
• pp.494-503
• /
• 2013

In this study, $CO_2$ adsorbent was produced for minimizing energy loss due to ventilation within the building. For improved selectivity about low concentration of $CO_2$ in multiple-use facilities, the ball type adsorbent was modified from a commercial zeolite, alumina, alkali metals and activated carbon with mixing LiOH, binder, and $H_2O$. We measured specific surface area, pore characteristic, and crystal structure of the modified adsorbent. Effects of alkalization on the absorptive properties of the adsorbents were investigated. Continuous column tests (2,000 ppm) and batch chamber tests ($4m^3$, 5,000ppm) showed that the modified adsorbent indicated about the selectivity of $CO_2$ more than 9.7% (0.613 mmol/g) compared with ordinary adsorbents and $CO_2$ removal efficiency of 88.8% within l hour, respectively. It was estimated that the modified adsorbent was applicable to indoor environments.

• Journal of People, Plants, and Environment
• /
• v.21 no.6
• /
• pp.445-460
• /
• 2018

Exposure to indoor air pollution is an emerging world-wide problem, with growing evidence that it is a major cause of morbidity worldwide. Whilst most indoor air pollutants are of outdoor origin, these combine with a range of indoor sourced pollutants that may lead to high pollutant levels indoors. The pollutants of greatest concern are volatile organic compounds (VOCs) and particulate matter (PM), both of which are associated with a range of serious health problems. Whilst current buildings usually use ventilation with outdoor air to remove these pollutants, botanical systems are gaining recognition as an effective alternative. Whilst many years research has shown that traditional potted plants and their substrates are capable of removing VOCs effectively, they are inefficient at removing PM, and are limited in their pollutant removal rates by the need for pollutants to diffuse to the active pollutant removal components of these systems. Active botanical biofiltration, using green wall systems combined with mechanical fans to increase pollutant exposure to the plants and substrate, show greatly increased rates of pollutant removal for both VOCs, PM and also carbon dioxide ($CO_2$). A developing body of research indicates that these systems can outperform existing technologies for indoor air pollutant removal, although further research is required before their use will become widespread. Whilst it is known that plant species selection and substrate characteristics can affect the performance of active botanical systems, optimal characteristics are yet to be identified. Once this research has been completed, it is proposed that active botanical biofiltration will provide a cheap and low energy use alternative to mechanical ventilations systems for the maintenance of indoor environmental quality.